« previous next »
Pages: [1]   Go Down

Author Topic: 357 Survivor  (Read 1690 times)

0 Members and 5 Guests are viewing this topic.

Offline mrloring

  • Trade Count: (11)
  • Avid Poster
  • **
  • Posts: 236
  • Gender: Male
357 Survivor
« on: February 03, 2008, 05:24:39 AM »
My local gun shop has a NEF 357 Survivor.  I have been wanting a 357 rifle for a while and I really like the Survivor stocks, especially in a light recoiling caliber. I looked on the H&r website and don't see the 357 Survivor listed, when where these made?  I am probably returning tomorrow to put it on layaway.  Can I order extra barrels for the survivor model?  It is an SB2 frame, but what about the handguard with the bull barrel channel.  Would I need another handguard for sporter weight barrels?

Thanks
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 357 Survivor
« Reply #1 on: February 03, 2008, 06:15:23 AM »
I found a previous post about a pre-96 357 Survivor with nickel frame, if it's an SB2 frame and made before '99, you'll be limited to low pressure chamberings, those marked with an * on the accessory barrel list. The best way to find out what can be fitted is to call H&R and give them the serial number, they'll tell you. toll free (866)776-9292, you can email them too hr1871@hr1871.com

I wouldn't worry about the forend fit, all forends have the same channel with the exception of the 10g/12ga USH, all barrels are about the same size where the forend fits with the exception of the Superlights, the taper is just different.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline mrloring

  • Trade Count: (11)
  • Avid Poster
  • **
  • Posts: 236
  • Gender: Male
Re: 357 Survivor
« Reply #2 on: February 05, 2008, 10:30:06 AM »
Thanks for the help.

I went back and put it on layaway.  It is must have been lost in the basement, because it is  NEW IN BOX, but the model number indicates that it is a 1996 model (NK).   

Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 357 Survivor
« Reply #3 on: February 05, 2008, 10:34:19 AM »
Congrats, that also means it's an ejector model, considered a plus by most! ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline PHATINJUN

  • "Seeker of the Red Mist"
  • GBO Supporter
  • Trade Count: (144)
  • Senior Member
  • *****
  • Posts: 4076
  • Gender: Male
Re: 357 Survivor
« Reply #4 on: February 05, 2008, 10:42:53 AM »
You may have trouble seeing the factory sights w/the Survivor set up . I know I did with mine when I swapped it over for a look see. Went back to the regular straight wood stock and am now looking for a set of BC stocks for it. Kurt
Logged
Deceased 2/16/24
https://www.dignitymemorial.com/obituaries/machesney-park-il/kurt-heckman-11671764

Sportster17M2,20"Nickle410Tamer,26"410,
WTUTI12ga,WTU25-06,M158 22RemJet, 24"Ultra.204Ruger24"UltraFluted.204Ruger
M157Mannliker.22Hornet,24".223UltraFluted,   24".223Ultra,7X64BrenekkeUltra,22-250AIUltraFluted            7.62x39,22"303Britstub.32H&Rmag, .32303BritstubHuntsman,24" SS.50calHuntsman 58calHuntsman 12gaHuntsman
NEF RevolversSSModel73.32H&Rmag                     Blued Model73.32H&R mag The herd is shrinking!!
                                 "SOLI DEO GLORIA"

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: 357 Survivor
« Reply #5 on: February 05, 2008, 10:49:55 AM »
I have a set of Survivor stocks on my .22 Mag Sportster fitted with a Millet Red Dot which is my favorite Maine winter coyote gun to this date. I have no problem with using the the Red Dot and have shot it with open sights also with no problems at all. Try it and I think you will like it. Congratulations on a great find!!!....<><....:)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline Default

  • Classified -- Banned
  • Trade Count: (13)
  • A Real Regular
  • *
  • Posts: 766
  • Gender: Male
Re: 357 Survivor
« Reply #6 on: February 05, 2008, 12:17:55 PM »
 Mrloring ,

  The first H&R rifle that caught my eye  several years ago was the 357 mag survivor rifle , just sounded like a great little versitile rifle thats ammo wouldnt be as combersome to pack in bulk as say a 308 or 223 should it be needed to feel the role for which it is named ... Anywho always liked and wanted one , Guess i could just buy a survivor stock my other halves 357 mag handi  ;D

  Congrats on a great find,

  Default
Logged
"Freedom is never more than one generation away from extinction. We didn’t pass it on to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children what it was once like in the United States when men were free." ~Ronald Reagan

THE QUICKEST WAY TO ENSLAVE A PEOPLE IS TO DISARM THEM ~ George Mason

Offline mrloring

  • Trade Count: (11)
  • Avid Poster
  • **
  • Posts: 236
  • Gender: Male
Re: 357 Survivor
« Reply #7 on: February 05, 2008, 01:11:42 PM »
Quote from: quickdtoo on February 03, 2008, 06:15:23 AM
if it's an SB2 frame and made before '99, you'll be limited to low pressure chamberings, those marked with an * on the accessory barrel list.

Tim

You mean the ones without an *. 

It doesn't matter because I already have a 243 Handi that is new enough to receive the higher pressure barrels.  I have been wanting to get a 357 barrel, but I was worried about using open sights with the Monte Carlo stock.  I would like to get a 20 ga barrel for the Survivor though.
Logged

Offline mrloring

  • Trade Count: (11)
  • Avid Poster
  • **
  • Posts: 236
  • Gender: Male
Re: 357 Survivor
« Reply #8 on: February 05, 2008, 01:15:58 PM »
Quote from: PHATINJUN on February 05, 2008, 10:42:53 AM
You may have trouble seeing the factory sights w/the Survivor set up . I know I did with mine when I swapped it over for a look see. Went back to the regular straight wood stock and am now looking for a set of BC stocks for it. Kurt


I didn't have any trouble seeing the factory sights.  The only complaint I have is because of the age of the gun, the sights are not fiber optic. :(
Logged

Offline mrloring

  • Trade Count: (11)
  • Avid Poster
  • **
  • Posts: 236
  • Gender: Male
Re: 357 Survivor
« Reply #9 on: February 05, 2008, 01:18:40 PM »
Quote from: quickdtoo on February 05, 2008, 10:34:19 AM
Congrats, that also means it's an ejector model, considered a plus by most! ;)

Tim


Yes my 243 is an ejector and the 357 is as well.  I also prefer the ejector to the extractor.  It allows for a faster reload if ever needed.  This survivor is going to be my camp gun. 
Logged

Offline bluebayou

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1216
  • Gender: Male
Re: 357 Survivor
« Reply #10 on: February 05, 2008, 01:23:54 PM »
I like the 357 for a packable rifle too.  When I get some cashflow I will be getting a synthetic youth stock and a Survivor forearm for my 357 barrel and selling off my wood.  I like the thumb screw on the forearm, but have a homebrew socket screw version to try with regular synthetic too. 

I will sacrifice some accuracy potential for losing some weight too.

Ah, the choices!
Logged

Offline smittty

  • Trade Count: (0)
  • Member
  • *
  • Posts: 58
Re: 357 Survivor
« Reply #11 on: February 11, 2008, 08:30:10 PM »
How come the new 357 mag handi doesn't have irons sights?

It's a max 100 yard rifle and they put a scope base on it instead.  What are these people thinking?

It's more "handi" if it has iron sights!

Smitty

Logged

Offline kingj

  • GBO Supporter
  • Trade Count: (53)
  • Avid Poster
  • *****
  • Posts: 208
  • Gender: Male
Re: 357 Survivor
« Reply #12 on: February 12, 2008, 01:05:29 AM »
As Tim mention I have a .357 model made in 96.It has a nickle plated receiver and barrel.
It came with the standard black stock and forearm,it has seen several changes since, including
a Max. reaming. Buy one .You'll like it.
Logged
Character 24 hours a day 7 days a week !

Life Member NRA
.357 Handi
.35 Handi

Offline mrloring

  • Trade Count: (11)
  • Avid Poster
  • **
  • Posts: 236
  • Gender: Male
Re: 357 Survivor
« Reply #13 on: April 25, 2008, 05:53:15 PM »
I brought it home today.  I loaded up 150 rounds for it tonight, I just hope the weather holds out tomooroow.

Aaron
Logged

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: 357 Survivor
« Reply #14 on: April 26, 2008, 01:33:55 AM »
best of luck Aaron. A .357 Mag Handi with a Survivor stocks set, an exjector model, NIB and staright from the factory (in 1996 no less!!!). Congratulations buddy, it sounds like one of the handiest Handi's out there. Don't forget to load up some low power loads (ala .38 Special mid range wadcutter) to plink with. They are great fun and handy for pests and vermin. For all sorts of pests I like to load these loads with the hollowbase wadcutters backwards with the hollowbase becoming a BIG hollowpoint. Great loads for anything that wants to bother you or the garden. Please follow up with a range and fun report....<><.... ;)
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline mrloring

  • Trade Count: (11)
  • Avid Poster
  • **
  • Posts: 236
  • Gender: Male
Re: 357 Survivor
« Reply #15 on: April 26, 2008, 05:57:17 AM »
Of the 150 rounds loaded. 100 are 38 special - 50 HBWC and 50 SWC
Logged

Offline jpshaw

  • GBO Supporter
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1063
  • Gender: Male
Re: 357 Survivor
« Reply #16 on: April 30, 2008, 04:20:49 PM »
Quote from: smittty on February 11, 2008, 08:30:10 PM
How come the new 357 mag handi doesn't have irons sights?

Whoa!  I just ordered a .357 Brl.  Are you saying it will not have iron sights?  I was not planning on putting a scope on it.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 357 Survivor
« Reply #17 on: April 30, 2008, 05:37:33 PM »
The accessory barrel has sights unless they changed it, the 2008 SB1 357 comes with a scope rail and no sights.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline kingj

  • GBO Supporter
  • Trade Count: (53)
  • Avid Poster
  • *****
  • Posts: 208
  • Gender: Male
Re: 357 Survivor
« Reply #18 on: May 02, 2008, 03:24:58 AM »
As Tim mentioned in his post I have a 1996 .357 Survivor I bought new in 2002.
It has a nickel receiver and barrel with the standard low comb synthetic stock.
It has been retro ed with the fire sights from a later Handi has been fitted with  .223,45-70
and 12 gauge barrels.
Logged
Character 24 hours a day 7 days a week !

Life Member NRA
.357 Handi
.35 Handi
Pages: [1]   Go Up
« previous next »