Author Topic: SHOW EM OFF!! (Read 2785 times)

rimfiresniper · « **on:** March 01, 2008, 06:54:04 PM »

show off all your TCs factory or full custom right here!!!!!

eggerds · « **Reply #1 on:** March 02, 2008, 03:33:02 AM »

Here 's my "brush" gun. pro hunter .45-70 katahdin 20" factory barrel. scoped with a nikon omega 3-9X. shoots great to 150yds.

Steve

onesonek · « **Reply #2 on:** March 02, 2008, 04:33:21 AM »

I need to take a new, as a couple are missing and one of these is gone.
the 15" 30-40 AI, top center is gone.
otherwise, rifle barrels are 6mmAI JP brake for long range work on varmints.
Bottom right is a 7BRM for my general purpose but mostly still hunting setup.
Bottom left is the 9.3x74R , my bigger than deer rig.
The other 2 pistol barrels are the fluted 243AI for moderate range varmints,
and the 218 Bee for the shorter ranges.
Not pictured above are the
250airln primarily an Antelope rig

and the 6.5x57air set up for deer

I do have another in process of being built, and that is a .300jnkr (.300-376 radius shoulder)
it'll be set up like the 6.5 but with elk in mind this coming season

Dave

skb2706 · « **Reply #3 on:** March 02, 2008, 05:29:58 AM »

My sons G2 7-30 Waters with factory stocks and barrel, Burris 3x9 40mm FFII

My .204 Ruger MGM bull barrel prairie dog rifle. Bullberry buttstock, Weaver KT15 AO scope.

Varmint Hunter · « **Reply #4 on:** March 02, 2008, 06:19:14 AM »

Quote from: eggerds on March 02, 2008, 03:33:02 AM

Here 's my "brush" gun. pro hunter .45-70 katahdin 20" factory barrel. scoped with a nikon omega 3-9X. shoots great to 150yds.

Steve

Steve

I just ordered a 20" Katahdin 45-70 bbl for my ProHunter 209x50 rifle. What kind of accuracy are you getting? Any particular loads working better than others?

RWD · « **Reply #5 on:** March 02, 2008, 06:38:13 AM »

Here's just a sampling

skb2706 · « **Reply #6 on:** March 02, 2008, 08:23:18 AM »

RWD - mind if I ask what kind of performance you can get in the 6.5 BRM on a G2 platform ? I had always assumed it was an Encore round and a bit much for the Contender G2.
I am thinking it would make an excellent round in a contender carbine.

eggerds · « **Reply #7 on:** March 02, 2008, 09:07:53 AM »

Varmint,

I've had good luck with:

IMR4198 36gr with 300gr hornady JHP no crimp (max encore load per Lyman) mild recoil

IMR4198 44gr with 250gr Barnes XFN no crimp (Barnes Manual) moderate recoil (marlin level load)

Both will shoot 2" groups at 100yds in my barrel. I'm sure a trigger job and a better shooter could improve the groups with these loads. I only need to shoot 75 yds max , so these are all I need for now. This gun is a pleasure to shoot with these loads and has taken a couple whitetails at close range.

Good luck,

Steve

RWD · « **Reply #8 on:** March 01, 2008, 10:31:54 AM »

Quote from: skb2706 on March 02, 2008, 08:23:18 AM

RWD - mind if I ask what kind of performance you can get in the 6.5 BRM on a G2 platform ? I had always assumed it was an Encore round and a bit much for the Contender G2.
I am thinking it would make an excellent round in a contender carbine.

Only recently got it, so have not done much work. It should about equal 6.5 JDJ stats. Have not yet pulled the chrony for this one, so warmer weather will tell.

Ladobe · « **Reply #9 on:** March 01, 2008, 09:35:50 PM »

Too many to post pictures of (20 frames/50+ barrels, lots of custom wood), but here's a few.

HEAD0001 · « **Reply #10 on:** March 01, 2008, 10:57:47 PM »

Left hand thumbhole stock. 6.5X284 MGM 28 inch ported bull barrel. Zeiss 6.5X20 Conquest scope.

mossyoakman · « **Reply #11 on:** March 03, 2008, 11:59:21 AM »

Here's my 25.06 tc

old4x4 · « **Reply #12 on:** March 03, 2008, 12:00:18 PM »

Some of my work:

mossyoakman · « **Reply #13 on:** March 03, 2008, 12:06:18 PM »

6x24x50 nikon monarch scope

mossyoakman · « **Reply #14 on:** March 03, 2008, 12:27:49 PM »

Here is one of old4x4 tc's

mossyoakman · « **Reply #15 on:** March 03, 2008, 12:32:14 PM »

old4x4, click on on thumbnail at bottom left of pic

David D. · « **Reply #16 on:** March 03, 2008, 03:07:18 PM »

SSK 6.5JDJ

17MACH2

David D. · « **Reply #17 on:** March 03, 2008, 03:20:02 PM »

SlowLeadBullets · « **Reply #18 on:** March 16, 2008, 04:01:31 PM »

Here's mine. I have a feeling she's going to get a lot of sisters.

kmac · « **Reply #19 on:** March 21, 2008, 02:29:47 AM »

Brush/Backpack rifle - Pro-Hunter in .308 Win - 16.25" barrel - Nikon ProStaff scope. I'm still working on setting up with iron sights (as backup) and have plans to switch to the Bushnell laser rangefinder scope.

And broken down for packing:

eggerds · « **Reply #20 on:** March 21, 2008, 02:49:52 AM »

Nice looking rig kmac. I'm doing a similar project in .243. Just waiting for barrel to return from shortening.

Steve

adirondacker · « **Reply #21 on:** March 22, 2008, 07:31:01 AM »

21" vv 50 alaskan 2-7 nikon,butler creek scope caps,sim pussy pad

adirondacker · « **Reply #22 on:** March 22, 2008, 07:36:14 AM »

22 hornet factory 24" barrel re-worked factory walnut with vintage rem steel buttplate.even with this cheap simmons scope i can put 3 rounds of 50 grn v-max into sub-moa groups at 100 yds.

rimfiresniper · « **Reply #23 on:** March 22, 2008, 04:47:38 PM »

kmac is that thing loud?

rural17 · « **Reply #24 on:** March 22, 2008, 05:16:51 PM »

Keep the eye candy comin' people

outdoor_sportsman · « **Reply #25 on:** March 23, 2008, 06:12:35 PM »

Well, I only have 1 Encore and it is not nearly as pretty as some of the others....Here she goes
T/C Encore 209x45 Weaver V10 2-10x38 Stainless/black syn. My best shot to date was a 4 pointer shot last fall @ 221 yards with Hornady 200gr. SST.

kmac · « **Reply #26 on:** March 24, 2008, 02:10:43 PM »

Quote from: rimfiresniper on March 22, 2008, 04:47:38 PM

kmac is that thing loud?

Yep, especially without earplugs! I find that an empty .45ACP casing fits my ears just right. I will say also that it's spot-on accurate. It does, however, lose about 160fps with the shortening.

pdh · « **Reply #27 on:** March 25, 2008, 01:21:52 PM »

My 243AI

30-06AI

ourway77 · « **Reply #28 on:** March 30, 2008, 05:32:36 AM »

This just a few that I have pictures for. More SP's than brains Lou

dstegjas · « **Reply #29 on:** March 30, 2008, 04:39:50 PM »

Here is my .223 from Bullberry. It has the fancy English walnut stock and the fancy black walnut forearm on it. When I get tired of the .223 I can switch off to my .17 hmr that I have from MGM.

Jim