Author Topic: general quality of cimmeron and uberti  (Read 1329 times)

0 Members and 4 Guests are viewing this topic.

Offline buckslayer

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 428
  • Gender: Male
general quality of cimmeron and uberti
« on: March 26, 2008, 07:54:42 AM »
are these good quality pistols?  i really know nothing of about pistols but would like to buy a single action.  just trying to get an idea of which brands to steer clear of.  thanks for any help!
I've got to many but never enough!!!! :eek:

Offline Lloyd Smale

  • Moderator
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18264
Re: general quality of cimmeron and uberti
« Reply #1 on: March 26, 2008, 08:35:24 AM »
I think there a really nice gun. Only problem i have is cimmerons warantee service SUCKS!
blue lives matter

Offline Steve in Michigan

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 164
Re: general quality of cimmeron and uberti
« Reply #2 on: March 26, 2008, 02:13:19 PM »
I have an EMF Hartford model in .45 Colt with the blackpowder frame (made by Uberti). It is beautifully finished, although the case colors aren't the brightest I've ever seen. The grips are really nice with good figure and it shoots to POA with a 255-grain bullet. It has become one of my most favorite revolvers. The only thing I don't care for is that they copied the Colt exactly even down to the small rear sight notch, although I can see it pretty good. It's just a pretty small sight picture.

I would highly recommend this revolver to anyone who wants as close to an original thumbuster for about 1/4 the cost.

Steve


Offline torpedoman

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 2574
  • Gender: Male
Re: general quality of cimmeron and uberti
« Reply #3 on: March 26, 2008, 06:52:10 PM »
uberti is a fine gun very well made, another is hawes made in germany
the nation that forgets it defenders will itself be forgotten

Offline buckslayer

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 428
  • Gender: Male
Re: general quality of cimmeron and uberti
« Reply #4 on: March 27, 2008, 02:52:50 AM »
hey, thanks for the responses.  it sound like uberti needs a closer look.....!
I've got to many but never enough!!!! :eek:

Offline blackhawk45

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 102
  • Gender: Male
Re: general quality of cimmeron and uberti
« Reply #5 on: March 27, 2008, 10:46:15 AM »
I just ordered a Cimarron Thunderer, in 45Colt, 3 1/2" barrel with a birds head grip.cant wait till it gets here!!!!
Hunter, Shooter,Second Amendment Supporter,Handloader.

Offline warrior1

  • Trade Count: (2)
  • A Real Regular
  • ****
  • Posts: 618
Re: general quality of cimmeron and uberti
« Reply #6 on: March 28, 2008, 05:10:31 PM »
i've got a model p 44 special and i love the gun,so far no problems.just hope i won't need
any warranty service.
blackhawk, i had one of thos little babies in my hands and it was an impressive revolver.dan
Dan Deluca aka "warrior1" has passed away.  Dan was a frequent poster here and on several other sites.  He passed away on 12/29/08 from a massive heart attack. RIP Dan.

Offline blackhawk45

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 102
  • Gender: Male
Re: general quality of cimmeron and uberti
« Reply #7 on: April 08, 2008, 07:47:01 PM »
i've got a model p 44 special and i love the gun,so far no problems.just hope i won't need
any warranty service.
blackhawk, i had one of thos little babies in my hands and it was an impressive revolver.dan


I just put 100 rounds through mine, needless to say I'm very pleased with it. And I can see a Lightning in 41 Colt ,showing up in the near future.
Hunter, Shooter,Second Amendment Supporter,Handloader.

Offline LRB

  • Trade Count: (0)
  • Member
  • *
  • Posts: 41
Re: general quality of cimmeron and uberti
« Reply #8 on: April 09, 2008, 12:08:41 PM »
  Bear in mind, Ubertyi's come in at least three grades. Cimmaron buys their top grade. The main difference is fit, finish, and price.

Offline Lloyd Smale

  • Moderator
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18264
Re: general quality of cimmeron and uberti
« Reply #9 on: April 10, 2008, 01:59:55 AM »
like was said here emf and cimmeron are all made by uberti. If it were my money id buy a uberti. A guy might have better luck with service from the people who actually make them
blue lives matter

Offline blackhawk45

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 102
  • Gender: Male
Re: general quality of cimmeron and uberti
« Reply #10 on: April 11, 2008, 11:34:57 PM »
  Bear in mind, Ubertyi's come in at least three grades. Cimmaron buys their top grade. The main difference is fit, finish, and price.


$439.00 for a 3 1/2"  Thunderer in 45Colt, not bad at all !
Hunter, Shooter,Second Amendment Supporter,Handloader.

Offline Old Griz

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2030
  • Gender: Male
Re: general quality of cimmeron and uberti
« Reply #11 on: April 13, 2008, 06:19:14 PM »
I have a Cimarron 1872 Colt Open Top that I have not had any trouble with, but then, it's only had about 250 (or less) rounds through it. You wouldn't expect any trouble with so little use. However, that said, I have heard so many horror stories about Cimarron's Customer Service I doubt I will buy another one from them. I kinda like the looks of Taylors firearms, and I'm sure they are Uberti, as well. I think I will give them a try next.

www.taylorsfirearms.com
Griz
<*}}}><

I Cor. 2.2 "For I determined not to know anything among you, save Jesus Christ, and him crucified."

Offline blackhawk45

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 102
  • Gender: Male
Re: general quality of cimmeron and uberti
« Reply #12 on: April 17, 2008, 04:13:26 AM »
  Bear in mind, Ubertyi's come in at least three grades. Cimmaron buys their top grade. The main difference is fit, finish, and price.


$439.00 for a 3 1/2"  Thunderer in 45Colt, not bad at all !

Just picked up and installed a set of checkered grips, very nice !
Hunter, Shooter,Second Amendment Supporter,Handloader.

Offline Win 73

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 125
Re: general quality of cimmeron and uberti
« Reply #13 on: April 19, 2008, 04:21:57 PM »
are these good quality pistols?  i really know nothing of about pistols but would like to buy a single action.  just trying to get an idea of which brands to steer clear of.  thanks for any help!

Unless you just want the Colt copy, I would recommend Ruger.  You can get fixed sights or adjustable sights.  I have never had to use it on any of my Rugers, but most everyone says their customer service is first rate.  And as far as durability, you will not find a more durable gun than Ruger.
"When a strong man armed keepeth his palace, his goods are in peace."  Luke 11:21