Author Topic: Problem Finding .32 Cal accessories  (Read 759 times)

0 Members and 1 Guest are viewing this topic.

Offline BigBossMan

  • Trade Count: (1)
  • Member
  • *
  • Posts: 62
  • Gender: Male
    • http://www.whup-a-bug.com
Problem Finding .32 Cal accessories
« on: March 31, 2008, 12:27:56 PM »
I am really having a hard time finding cleaning patch tips, brass brushes and in general a choice of accessories for my percussion .32 rifle.  Any one have a secret supplier? ::)
BigBossMan
Life SASS
Life NRA
Vietnam Era Vet

If God Be With Us, Who Can Be Against Us.

Offline papellet

  • Trade Count: (0)
  • Member
  • *
  • Posts: 54
Re: Problem Finding .32 Cal accessories
« Reply #1 on: March 31, 2008, 03:03:51 PM »
rmcsports.com or trackofthewolf.com

Offline Saloon slug

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 414
  • Gender: Male
  • Eastern NC
Re: Problem Finding .32 Cal accessories
« Reply #2 on: March 31, 2008, 05:03:57 PM »
+1 track of the wolf
From the halls of Montezuma

Offline BigBossMan

  • Trade Count: (1)
  • Member
  • *
  • Posts: 62
  • Gender: Male
    • http://www.whup-a-bug.com
Re: Problem Finding .32 Cal accessories
« Reply #3 on: March 31, 2008, 11:56:16 PM »
Many Thanks Folks.....Found it all.....Track of the Wolf.
BigBossMan
Life SASS
Life NRA
Vietnam Era Vet

If God Be With Us, Who Can Be Against Us.

Offline wgr

  • Trade Count: (3)
  • Contributor
  • ***
  • Posts: 414
  • Gender: Male
Re: Problem Finding .32 Cal accessories
« Reply #4 on: April 01, 2008, 01:47:58 PM »
Dixie gun works
never to much gun

Offline longcaribiner

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 376
Re: Problem Finding .32 Cal accessories
« Reply #5 on: April 02, 2008, 03:15:13 AM »
My local gun shop sells stuff for modern guns that works just fine in a .32 cal smoke pole.  There are modern jags for 32 caliber cartridge guns like the 32-20 and 32 Win Spl.     I have obtained surprising accuracy using plain old cotton flannel 22 rim fire cleaning patches for the patches around the .310 ball.  I made my own ball starter with a piece of brass rod from the hardware store and a wooden ball from the craft store.   I found a great little plastic funnel for powder at a kitchen specialty shop and use an empty 38 S&W shell for a powder measure.  Knock out the primer and screw an eyelet in the hole at the bottom.