Author Topic: 7mm TCU barrels  (Read 782 times)

0 Members and 1 Guest are viewing this topic.

Offline canyon-ghost

  • Trade Count: (0)
  • Member
  • *
  • Posts: 36
  • Gender: Male
    • Just Hafta Shoot!
7mm TCU barrels
« on: April 05, 2008, 07:23:01 PM »
  I see the guys here are talking a lot about the 7mm TCU.  My Question there is about powder types.  Have been using slow burning rifle powders but, it's only a 10" barrel.

With cast bullets (gas checked), what powders are being used nowdays? ???
Can't hit the broad side of a barn with a very big rock!

Offline sdb777

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 326
  • Gender: Male
Re: 7mm TCU barrels
« Reply #1 on: April 06, 2008, 02:00:55 AM »
I use the Blue Dot, AA#2015BR, AA#2230 with good results from short barreled Contenders(10" and 14").
I use Varget and RL-15 for the longer barrel(21") carbine TC.



Scott (just a little experimenting) B
Custom Cartridge pens available.....

Offline yorketransport

  • Trade Count: (13)
  • Avid Poster
  • **
  • Posts: 205
Re: 7mm TCU barrels
« Reply #2 on: April 06, 2008, 06:20:13 AM »
I'm not sure about cast bullets, but I've had good results with H322 and IMR 4198 with jacketed bullets out of my 10".
Shipping FedEx Ground keeps a small business running.

I'm not late, I'm early for tomorrow.

Keep honking, that should fix everything.

Offline drags

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 197
Re: 7mm TCU barrels
« Reply #3 on: April 06, 2008, 01:37:12 PM »
sdb777, do you have any varget loads for the 120 gr bullet in the 7mm tcu with 21" barrel?
Drags

Offline canyon-ghost

  • Trade Count: (0)
  • Member
  • *
  • Posts: 36
  • Gender: Male
    • Just Hafta Shoot!
Re: 7mm TCU barrels
« Reply #4 on: April 06, 2008, 06:00:13 PM »
 Thank you , Scott
   I appreciate all the help I can get.  I love the calibre but, it's wanting to eat me alive at 200 meters lately.
Can't hit the broad side of a barn with a very big rock!

Offline Steve P

  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 1733
  • Gender: Male
Re: 7mm TCU barrels
« Reply #5 on: April 07, 2008, 08:51:12 AM »
WW748, H4895, VVN133, and H322 are excellent powders for this gun.
I use 748 and have some N133 loads to try.  RCBS 145 Sil bullet.

Steve  :)
"Life is a play before an audience of One.  When your play is over, will your audience stand and applaude, or stay seated and cry?"  SP 2002

Offline canyon-ghost

  • Trade Count: (0)
  • Member
  • *
  • Posts: 36
  • Gender: Male
    • Just Hafta Shoot!
Re: 7mm TCU barrels
« Reply #6 on: April 11, 2008, 04:22:22 PM »
Thank you, Steve

That's what I was looking for!
Can't hit the broad side of a barn with a very big rock!