Author Topic: Accessory Barrel Orders (Read 7278 times)

quickdtoo · « **on:** April 14, 2008, 08:51:44 AM »

Many new members have asked specifics about sending a frame in for accessory barrels, you can send it by mail or other carrier like UPS or Fedex, but H&R will return it by UPS after fitting the new barrel(s). A lot of members including myself just send the frame and order a stock set, or just order a forend that will be dedicated to the new barrel if you intend on swapping barrels around on one frame. Many don't like to send a nice stock set at all cuz sometimes they damage it while fitting/handling, sending just a frame in a USPS priority small flat rate box will cost $4.95 plus insurance and they'll have it in 2 days, 3 at most. You can also break the butt and frame down and send them with the forend, if you don't order one separately, in a flat rate priority box for $10.35 plus insurance. Some members don't send any wood at all, just the frame even tho the instructions say to send the butt and forend.

Tim

http://www.hr1871.com/Support/accessoryProgram.aspx

trotterlg · « **Reply #1 on:** April 14, 2008, 09:45:42 AM »

Any information on the cutoff date for new barrels? Some time this year they will stop accepting them at the current facility and start shipping them to China or where ever they are moving production to, I really wouldn't want the first one fit in Brazil. Larry

Mitch in MI · « **Reply #2 on:** April 14, 2008, 04:04:49 PM »

I talked to Jenifer today, .357 barrels in stock and no problem getting one fitted before any future move would complicate my order. I didn't press her for details on the move, but it seems like business as usual in the shop for now.

tallyho · « **Reply #3 on:** April 15, 2008, 05:21:01 AM »

If I recall, all the new barrels, including 357 are extractor rather than ejector... am I correct?

GPR125 · « **Reply #4 on:** April 15, 2008, 07:10:49 AM »

New to this forum, but not to the world. I recently picked up a HB ,223, that will neither eject or extract. I've contacted H&R & they indicated it could be fixed, so thought I'd get and extra barrel fitted and the trigger tweaked if possible while the receiver was there. Just having trouble deciding on the caliber. I swapped the stock & fore end for the brown laminate off an Ultra. So will have a .270 action & barrel to move along. I have another .223 & a .204 bolt rifles, I'm stuck between the HB 204 or a ,243. Any thoughts?

stimpylu32 · « **Reply #5 on:** April 15, 2008, 08:02:27 AM »

GPR125

The 243 Bull Barrel in 22" would be a good choice , also the 26" 25/06 or the 22" 45/70 , all depends on what you want to do with the rifle .

stimpy

quickdtoo · « **Reply #6 on:** April 15, 2008, 01:08:05 PM »

Quote from: tallyho on April 15, 2008, 05:21:01 AM

If I recall, all the new barrels, including 357 are extractor rather than ejector... am I correct?

Yes, H&R hasn't made an ~~extractor~~ ejector centerfire rifle barrel for about 2-3yrs, they first started in 2004, all subsequent barrel runs have been extractors, there may be some slow movers that still have ejectors, 223 Superlights and 450 Marlin for a couple.

Tim

tallyho · « **Reply #7 on:** April 15, 2008, 01:19:47 PM »

Thanks Tim.

Winter Hawk · « **Reply #8 on:** April 17, 2008, 12:50:18 AM »

"H&R hasn't made an extractor centerfire rifle barrel for about 2-3yrs"

Tim, shouldn't that be that they haven't made an EJECTOR rifle barrel in about 2-3 years? :>)

-WH-

Steve P · « **Reply #9 on:** April 17, 2008, 04:04:49 AM »

What is turn around time? If I send in a frame, how long before barrel and frame come home?

Steve

quickdtoo · « **Reply #10 on:** April 17, 2008, 04:39:17 AM »

Quote from: Winter Hawk on April 17, 2008, 12:50:18 AM

"H&R hasn't made an extractor centerfire rifle barrel for about 2-3yrs"

Tim, shouldn't that be that they haven't made an EJECTOR rifle barrel in about 2-3 years? :>)

-WH-

Oops!!

Yes, that's what I should have typed, thanks!!

Tim

quickdtoo · « **Reply #11 on:** April 17, 2008, 04:42:05 AM »

Quote from: Steve P on April 17, 2008, 04:04:49 AM

What is turn around time? If I send in a frame, how long before barrel and frame come home?

Steve

Turn around has been as short as 21 days including shipping both ways lately, as long as the barrel is in stock, now is the time to send them in, it's their slowest time of the year traditionally, now thru August. I would advise calling first to check availability, they're out of 30-30 barrels until June or July.

Tim

GPR125 · « **Reply #12 on:** April 27, 2008, 04:43:16 AM »

Kind of curious...if a barrel is sent in for repair that had ejector, would it be returned as extractor? A new barrel fitted would presumably be an extractor? Hmmmm guess we'll wait & see. I was kinda getting used to the .17 HMR & HM2 rimfires kicking out over my right shoulder.
When I called lasted week, they had lots of .204 in stock and green laminated wood. Evidently a delivery glitch with the cinnamon lami wood

quickdtoo · « **Reply #13 on:** April 27, 2008, 04:57:12 AM »

If they need to replace a defective centerfire rifle ejector barrel, it will be with an extractor if that's all they have, which is highly likely. Some of the less popular chamberings were still available with ejectors since they were old runs and slow movers, but I don't know if that's still the case, the 450 Marlin is now only available as an extractor. Rimfires and shotgun barrels are still ejectors, for now anyway, no one has reported an extractor on them yet.

Tim

kernman · « **Reply #14 on:** June 08, 2008, 02:56:45 PM »

quickdtoo:

You said that some just send in the receiver? Did I hear you correctly?

I would prefer to do that. But I worry that if I did, NEF would send it back, because I did not follow the instructions about sending the stock and the fore end as well.

I assume that while the barrel must be factory fitted, NEF could use any stock and fore end they have lying around?

By "frame" do you mean receiver? Or would frame include the stock as well?

GPR125 · « **Reply #15 on:** June 08, 2008, 03:32:09 PM »

I just sent two receivers, with a barrel for repair. Having also ordered a replacement stock & fore end, when H&R returned them, one was packaged as a complete rifle and the repaired receiver/barrel unit was in another box, although all were shipped together. Well packed and very reasonable 3 week turn around including transit time. I had called them to verify the wood & barrel were in stock. That was probably the hardest part of the whole deal. Took 3 calls to actually get an answer, but H&R C/S was very helpful. Just be sure to include the details of exactly what you want done. I would also recommend putting a tag on the receiver with your name.address & phone #. Good luck

quickdtoo · « **Reply #16 on:** June 08, 2008, 04:24:04 PM »

I've ordered several barrels(at least 7 or 8 ) and only sent the frame(receiver), but I always order a stock set too since I don't swap barrels around since I like complete Handis, 43 so far and counting.

But many here don't send any wood with their accessory barrel orders since H&R sometimes damages stocks when handling them, so they only send the frame, or as an alternative, send a plain stock instead of a nice Ultra or walnut stock that came on the firearm originally. No one has ever reported being refused a barrel order for stocks not being sent with the order.

That said, I can't speak for what Remington does for CS once they move to Ilion.

Tim

WILD_WEASEL · « **Reply #17 on:** June 09, 2008, 04:12:57 AM »

Any word on when the cut off is to send rifles in for new barrels?

quickdtoo · « **Reply #18 on:** June 09, 2008, 04:22:23 AM »

Call or email them and ask. We were told they would change the address on the acc barrel page when the time came, it hasn't been changed yet.

Tim

lonewolf5348 · « **Reply #19 on:** June 09, 2008, 05:55:48 AM »

I drop my action in the mail the 1st week of june
I did speak with customer service and ask if they wanted any wood with the action the girl said the action is all they need
I did double check and the 7MM-08 barrel are in stock

rex6666 · « **Reply #20 on:** June 09, 2008, 06:15:09 AM »

do they ship the actions,(with new barrel) straight back to you or to your ffl

quickdtoo · « **Reply #21 on:** June 09, 2008, 06:23:18 AM »

Back to you, you're the owner, why would they need to ship to an FFL when there's no transfer of ownership?

Tim

lonewolf5348 · « **Reply #22 on:** June 09, 2008, 07:56:01 AM »

tim: is correct no FFL needed

rex6666 · « **Reply #23 on:** June 09, 2008, 08:36:50 AM »

ok!
i am sorry, i was under the impresion that when a firearm was shipped it had to be shipped to a ffl

towpro · « **Reply #24 on:** June 09, 2008, 11:22:21 AM »

But someone has to be home to sigh for it when the Brown truck shows up.

quickdtoo · « **Reply #25 on:** June 09, 2008, 11:25:18 AM »

The someone has to be an adult if the BBT driver is doing his/her job!

Tim

kernman · « **Reply #26 on:** June 13, 2008, 04:25:22 PM »

I sent away for a 20 gauge (rifled slug) replacement barrel on Tuesday.

The H & R lady told me they were not accepting any new barrel orders after June 20, due to the move (to New York State, she said).

Yes, they did have 20 gauge slug barrels in stock.

It took me about five minutes to get through.

I expect mine to get there on the 16th. Maybe with luck I'll have it back by the end of June? Probably more like mid-July.

Frank

quickdtoo · « **Reply #27 on:** June 13, 2008, 04:31:59 PM »

That's what 1871 was told yesterday.

Tim

http://www.gboreloaded.com/forums/index.php?topic=146224.msg1098597804#msg1098597804

dpe.ahoy · « **Reply #28 on:** June 13, 2008, 07:04:53 PM »

And I called today to make sure they were still up and going. Sent off 2 frames to get 357 barrels and stocks. Sent next day service to make sure it was there in time. Ordered some other stuff also, including trigger work. Now the hard part, waitin.

DP.

1871 · « **Reply #29 on:** June 14, 2008, 04:04:25 AM »

Drats! Now I kinda wish I'd have put in for one of the 20 gauge (Rifled) slug barrels also. Is that something you can do- since the frame is on it's way to the shop anyhow- call and request another additional barrel? with funding, of course.

Man this handiholic stuff is the business- I get to itching all over and what feels like a mild fever sets in when I get to thinking of it all! Weird!!! My mouth is watering too! Sorry, I know....TMI!!! Hehe!

'71