Author Topic: I need a powder recomendation  (Read 398 times)

0 Members and 1 Guest are viewing this topic.

Offline Ray Cover

  • Trade Count: (0)
  • Member
  • *
  • Posts: 77
I need a powder recomendation
« on: April 18, 2008, 03:02:58 PM »
I have run into a little problem and I hope one of you has the answer.

I am getting ready to work up some handloads for a 357 Herrett in a 14" contender barrel.

The Sierra loading manual calls for H4227 which is discontinued.  SO I went on a hunt for IMR 4227 which I am told is the standard substitute.  Well I am having a hard time finding that locally as well.  I can order it but for working up a load I would just as soon buy a can locally as to pay the shipping for one can. 

Do any of you have a good recommendation for a powder to try instead of these two for the 357 Herrett?

Thanks,

Ray

Offline sdb777

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 326
  • Gender: Male
Re: I need a powder recomendation
« Reply #1 on: April 18, 2008, 03:33:38 PM »
Alliant 2400 will work with light projectiles.
But I've always used IMR4227.....so I guess that isn't much help.  Where are you located?




Scott (but I tried) B
Custom Cartridge pens available.....

Offline Ray Cover

  • Trade Count: (0)
  • Member
  • *
  • Posts: 77
Re: I need a powder recomendation
« Reply #2 on: April 18, 2008, 03:37:29 PM »
Thanks Scott,

I'm about a half hour south of St Louis.  Today I bought 140 Gr. Hornady xtps and 158 gr. Sierra Jacketed Hollow points.

Ray

Offline sdb777

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 326
  • Gender: Male
Re: I need a powder recomendation
« Reply #3 on: April 18, 2008, 03:44:53 PM »
Maybe one of those weekend road trips to MidwayUSA just to the west of you, never now what you can pick up when you get there ::)

With those projectiles, you really need to get some 4227 shipped to you, or maybe you can get together with another 'like-minded' handloader and split the cost of the hazmat fee?



Scott (got to be someone near ya) B
Custom Cartridge pens available.....

Offline stimpylu32

  • Moderators
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 6062
  • Gender: Male
Re: I need a powder recomendation
« Reply #4 on: April 18, 2008, 04:09:16 PM »
Ray Cover

IMR 4198 is another good choice along with reloader 7 and 2400 .

stimpy
Deceased June 17, 2015


:D If i can,t stop it with 6 it can,t be stopped

Offline Ray Cover

  • Trade Count: (0)
  • Member
  • *
  • Posts: 77
Re: I need a powder recomendation
« Reply #5 on: April 19, 2008, 02:15:51 AM »
Thanks a bunch guys.  I appreciate the input.

Ray