Author Topic: Self made heater.  (Read 3435 times)

0 Members and 1 Guest are viewing this topic.

Offline SAWgunner

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 454
    • http://www.ranger.org/
Self made heater.
« on: July 17, 2003, 07:57:34 AM »
You need:

1 standard size roll of Cheap Toilet Paper
1 Coffee can the size of that roll
1 bottle of Isopropyl Alcohol

Stuff the TP into the Coffee can, and pour the bottle of alcohol in the can until the TP won't absorb anymore.  Put the lid on it, and light it when you need it.  To put it out, just put the lid back on.  I learned this as a kid from my father, and we used them in our deer stands.  It emits a low blue flame and quite a bit of heat.  They don't really smell too bad, but their is a slight smell of alcohol, so you might want to just use it at camp.  It never hurt our hunting while in the stand, though.
Nosce Hostem
"Birds of Prey" 743rd MI BN
Proud Freemason-Chugwater Lodge No. 23

Offline 01magnatec

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 144
Self made heater.
« Reply #1 on: July 17, 2003, 08:09:41 AM »
But if the lid is plastic it would melt right off....Or are you talking about the metal piece inside?

Offline SAWgunner

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 454
    • http://www.ranger.org/
Self made heater.
« Reply #2 on: July 17, 2003, 08:18:53 AM »
Quote from: 01magnatec
But if the lid is plastic it would melt right off....Or are you talking about the metal piece inside?


Oops...I always forget the important part.  I use aluminum foil.  Anything that will not melt or catch fire to cut off the oxygen will work.
Nosce Hostem
"Birds of Prey" 743rd MI BN
Proud Freemason-Chugwater Lodge No. 23

Offline 01magnatec

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 144
Self made heater.
« Reply #3 on: July 17, 2003, 11:15:31 AM »
:wink:

Offline T. Two Dogs

  • Trade Count: (0)
  • Member
  • *
  • Posts: 33
Self made heater.
« Reply #4 on: September 07, 2003, 03:59:48 AM »
Howdy:

This is a great trick...I have used this for years in the duck blind - I generally stay out long enough for the alcohol to finish burning, let it cool down and then just put the plastic lid back on.  I guess the aluminum foil idea is a good one - got to try it this season.  Oh yes, the first time this is used, P.U. - th epaint on the can smells foul when burning - after that - warm hands.  :grin:

Offline Bluedog

  • Trade Count: (0)
  • Member
  • *
  • Posts: 24
Self made heater.
« Reply #5 on: October 14, 2003, 09:41:40 AM »
Use a 1qt paint can, and you have a lid that doesn't melt. Use methyl hydrate for the fuel, it burns hotter without the smell. Poke holes in the side of 1 gallon paint can, and turn it upside down over it and you have a safer litttle stove with a good cooking surface, as well as a container with a handle to store it all in, along with enough room for a plastic box for matches etc.

Offline dallas44432

  • Trade Count: (0)
  • Member
  • *
  • Posts: 16
Another one
« Reply #6 on: December 30, 2003, 04:14:28 PM »
Sand and Kerosene in an old paint can work well also.  Coffee can with a wire handle will work too.  I really like the alcohol and TP idea,  will use it...Dallas
Gotta Have It...

Offline flatlander

  • Trade Count: (3)
  • A Real Regular
  • ****
  • Posts: 578
Self made heater.
« Reply #7 on: January 07, 2004, 07:15:49 AM »
I've used fiberglass insulation and denatured alcohol in a pint stain or paint can for a backpacking stove. You can just put the lid back on to extinguish it.

Offline rickyp

  • Trade Count: (19)
  • Senior Member
  • *****
  • Posts: 3052
  • Gender: Male
Self made heater.
« Reply #8 on: January 18, 2004, 12:32:58 PM »
you can always get youre self one of the little habatchi and just use normal old charcoal this will put out enough heat to warm up a med. duck blind and  when it is slow you cap always put on a few hotdogs and have lunch,