Author Topic: Best powder for a .243,308 and .358  (Read 700 times)

0 Members and 3 Guests are viewing this topic.

Offline Country Boy

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 932
Best powder for a .243,308 and .358
« on: May 27, 2008, 08:43:33 AM »
 I'm going to shoot 85-90 grn in the 243, 150 in the .308 and .250s in the .358

Offline deltecs

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1605
  • Gender: Male
Re: Best powder for a .243,308 and .358
« Reply #1 on: May 27, 2008, 09:47:17 AM »
I've found IMR 4350 at 42 grains for a 100 gr bullet the best consistency in accuracy in my Ruger RSI for the .243.   My .308 in Mod 88 Win likes IMR 4064 at 47 grains for 150 gr bullets.  I don't have a preferred load for the .358.
Greg lost his battle with cancer last week on April 2nd 2009. RIP Greg. We miss you.

Greg
deltecs
Detente: An armed citizenry versus a liberal society
Opinion(s) are expressly mine alone and do not necessarily agree with those of GB or GBO mgmt.

Offline Davemuzz

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2009
Re: Best powder for a .243,308 and .358
« Reply #2 on: May 27, 2008, 10:31:48 AM »
.243---for any bullet 90 grains or under, H-414. If it's 100 grain bullet....well...I just don't shoot it. I got other calibers for bigger "stuff".

.308---for 150 to 168 grain bullets, Varget seems to work the best. I've tried a bunch of different ones (I can't say I've tried 'em all) but I always come back to Varget.

.358---I couldn't tell ya. I don't shoot that caliber. I wish I  had game that I could shoot that caliber at! I do shoot the 45-70 at whitetail...but I shoot lead flatnose bullets at 'em or they would just lose too much meat.

MHO

Dave

Offline Will_C

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 201
Re: Best powder for a .243,308 and .358
« Reply #3 on: May 28, 2008, 04:35:39 AM »
Are you looking for one powder for all three? That is a tough order. The .243 needs a rather slow powder,I use a lot of 4350 at those weights. The .308 should work well with 4895, 4320, WW748, RL-15, and a few others. The .358 can use 4895, I think my buddy loads his with RL-7. Good luck.

Offline yooper77

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 1746
  • Gender: Male
Re: Best powder for a .243,308 and .358
« Reply #4 on: May 29, 2008, 04:59:00 AM »
Lots of easy answers: IMR-4064, H-4895, IMR-4895 or IMR-4320 you can find alot more also.

Do to http://data.hodgdon.com/cartridge_load.asp and take a look.

yooper77

Offline gl411

  • Trade Count: (0)
  • Member
  • *
  • Posts: 17
Re: Best powder for a .243,308 and .358
« Reply #5 on: May 29, 2008, 11:45:16 AM »
i too use 4350 in the 243- but over all you might look at H335- varget-- BLC#2  I could certainly use it two of the three 308, 358-- and it very fast with 250's in the 358--for that matter with all bullet 200-250--

Offline victorcharlie

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3573
Re: Best powder for a .243,308 and .358
« Reply #6 on: May 29, 2008, 11:49:01 AM »
I'm just guessing, but if I had to pick one for all three, I'd probably pick IMR-3031 or Varget......
"Extremism in the defense of liberty is no vice. Tolerance in the face of tyranny is no virtue."
Barry Goldwater

Offline Davemuzz

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2009
Re: Best powder for a .243,308 and .358
« Reply #7 on: May 29, 2008, 02:12:05 PM »
I'm just guessing, but if I had to pick one for all three, I'd probably pick IMR-3031 or Varget......

VC.....I havn't started drinking yet and you said you would pic one.....then you said 2.

Hey...I'm just sayin. :P

Dave

Offline bigjeepman

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1108
  • Gender: Male
Re: Best powder for a .243,308 and .358
« Reply #8 on: May 29, 2008, 03:34:58 PM »
I use Varget for both.

bjm
5 Rules for Happiness
free your heart from hatred ... free your mind from worries ... live simply ... give more ... expect less

Offline R.W.Dale

  • Trade Count: (22)
  • Senior Member
  • *****
  • Posts: 2170
Re: Best powder for a .243,308 and .358
« Reply #9 on: May 29, 2008, 04:02:49 PM »
 I current use VARGET for 243, 308 and 35 whelen

Offline victorcharlie

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3573
Re: Best powder for a .243,308 and .358
« Reply #10 on: May 30, 2008, 01:19:06 AM »
I'm just guessing, but if I had to pick one for all three, I'd probably pick IMR-3031 or Varget......

VC.....I havn't started drinking yet and you said you would pic one.....then you said 2.

Hey...I'm just sayin. :P

Dave

Well Dave, I guess the key to the sentence is the word "or". :)

Okay, okay.....I know what you mean.......

Your looking for commitment aren't you?

Then, IMR-3031. :D
"Extremism in the defense of liberty is no vice. Tolerance in the face of tyranny is no virtue."
Barry Goldwater

Offline Davemuzz

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2009
Re: Best powder for a .243,308 and .358
« Reply #11 on: May 30, 2008, 03:47:24 AM »
VC....Nah....I was just pointin out the fact that I didn't start drinkin yet!  ;D 8)

Dave

Offline victorcharlie

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3573
Re: Best powder for a .243,308 and .358
« Reply #12 on: May 31, 2008, 02:46:03 AM »
 ;)
"Extremism in the defense of liberty is no vice. Tolerance in the face of tyranny is no virtue."
Barry Goldwater