« previous next »
Pages: [1]   Go Down

Author Topic: 360 Dan Wesson  (Read 1038 times)

0 Members and 1 Guest are viewing this topic.

Offline Vic49

  • GBO Supporter
  • Trade Count: (30)
  • Contributor
  • *****
  • Posts: 483
  • Gender: Male
360 Dan Wesson
« on: July 06, 2008, 09:00:04 PM »
I am not a reloader so was wondering if .360DW ammo is available and if so where.  Thanx in advance.
Logged
And what country can preserve its liberties, if its rulers are not warned from time to time, that this people preserve the spirit of resistance? Thomas Jefferson
Handi rifles
Knight, T/C and CVA Muzzleloaders
Bowtech and Diamond bows

Offline Datil

  • GBO Supporter
  • Trade Count: (17)
  • Senior Member
  • *****
  • Posts: 1822
  • Gender: Male
Re: 360 Dan Wesson
« Reply #1 on: July 07, 2008, 02:26:12 AM »

 Vic49, Not that I know about Has 360 DW or 357 Maxie Ammo.
  You need to become a reloader, Its not bad, saves a lot of cash after you are set up.
   Good luck. Marv.
Logged

Offline jpshaw

  • GBO Supporter
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1063
  • Gender: Male
Re: 360 Dan Wesson
« Reply #2 on: July 07, 2008, 02:58:12 AM »
If it is available I don't know about it.  My first purchase after getting my .357 barrel was 100 Starline .360 DW cases.  Then the fun begins.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 360 Dan Wesson
« Reply #3 on: July 07, 2008, 04:40:58 AM »
GBO Sponsor Reeds Ammo has Max ammo listed, you'd have to check with him to see if he has the DW ammo, click Graybeard Outdoors Home page in the news box for the sponsor list.  ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Vic49

  • GBO Supporter
  • Trade Count: (30)
  • Contributor
  • *****
  • Posts: 483
  • Gender: Male
Re: 360 Dan Wesson
« Reply #4 on: July 07, 2008, 07:22:15 AM »
Thanx guys, have read that a lot of the .357's will shoot 360 DW without any alteration now a stupid question, will they do the same with the .357 Max?????
Logged
And what country can preserve its liberties, if its rulers are not warned from time to time, that this people preserve the spirit of resistance? Thomas Jefferson
Handi rifles
Knight, T/C and CVA Muzzleloaders
Bowtech and Diamond bows

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 360 Dan Wesson
« Reply #5 on: July 07, 2008, 07:30:54 AM »
Not likely, there's quite a difference in the max and DW length 1.6" vs 1.4" and 1.3" for the mag, but some have said they can trim max brass just a little to make it work, but that doesn't help if you're using factory ammo. I have to trim DW brass .010" to fit in mine or it won't eject.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Vic49

  • GBO Supporter
  • Trade Count: (30)
  • Contributor
  • *****
  • Posts: 483
  • Gender: Male
Re: 360 Dan Wesson
« Reply #6 on: July 07, 2008, 07:40:10 AM »
One more question Tim and I'll not bother you anymore, do you think the .357 with the hottest available factory loads would be a 100 yd. deer rifle.
Logged
And what country can preserve its liberties, if its rulers are not warned from time to time, that this people preserve the spirit of resistance? Thomas Jefferson
Handi rifles
Knight, T/C and CVA Muzzleloaders
Bowtech and Diamond bows

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 360 Dan Wesson
« Reply #7 on: July 07, 2008, 08:37:41 AM »
From all the reports here (no personal experience) I'd say yes with the right bullet and shot placement. Carp's daughter Abby took her deer with the Cor-bon 180gr load at 109yds.  ;)

Tim

http://www.gboreloaded.com/forums/index.php/topic,123514.msg1098428967.html#msg1098428967

http://www.gboreloaded.com/forums/index.php/topic,95477.msg1098233620.html#msg1098233620

http://www.gboreloaded.com/forums/index.php/topic,86093.msg521088.html#msg521088
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline dpe.ahoy

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 3363
  • Gender: Male
Re: 360 Dan Wesson
« Reply #8 on: July 08, 2008, 01:12:44 AM »
I've put down a few with the 357 out of rifles.  They work just fine. ;)  DP.
Logged
RIP Oct 27, 2017

Handi's:22Shot, 22LR, 2-22Mag, 22Hornet, 5-223, 2-357Max, 44 mag, 2-45LC, 7-30 Waters, 7mm-08, 280, 25-06, 30-30, 30-30AI, 444Marlin, 45-70, AND 2-38-55s, 158 Topper 22 Hornet/20ga. combo;  Levers-Marlins:Two 357's, 44 mag, 4-30-30s, RC-Glenfields 36G-30A & XLR, 3-35 Rem, M-375, 2-444P's, 444SS, 308 MX, 338Marlin MXLR, 38-55 CB, 45-70 GS, XS7 22-250 and 7mm08;  BLR's:7mm08, 358Win;  Rossi: 3-357mag, 44mag, 2-454 Casull; Winchesters: 7-30 Waters, 45Colt Trapper; Bolt actions, too many;  22's, way too many.  Who says it's an addiction?

Offline Badnews Bob

  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 2963
  • Gender: Male
Re: 360 Dan Wesson
« Reply #9 on: July 08, 2008, 11:11:38 AM »
.357s are plenty of a deer getter , I've taken whitetails at 65+ yards with my 6" Ruger and my handie will out shoot it any day. I prefer 180 gr lead but the 158gr JSP rem bulk bullets work very well also.  All that being said my max is tied for first place on my favorite rifle list with my .45-70 handie.
Logged
Badnews Bob
AE-2 USN retired

Offline Tencubed

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 265
  • Gender: Male
Re: 360 Dan Wesson
« Reply #10 on: July 08, 2008, 11:15:27 AM »
Years ago when my job required responding to traffic accidents I trailed and finished off a number of deer that had been hit by cars.  Used a 38 Spl. with 158 grain lead bullets.  Always got the job done with little fuss.  I suspect the 357 will be capable if the bullet placement is proper.

Mike
Logged
NRA Benefactor Life Member
Why do I carry a gun?  Because a Cop's too heavy.
Oldest rifle I shoot - 1854 Sharps 50-70

Offline PHATINJUN

  • "Seeker of the Red Mist"
  • GBO Supporter
  • Trade Count: (144)
  • Senior Member
  • *****
  • Posts: 4076
  • Gender: Male
Re: 360 Dan Wesson
« Reply #11 on: July 09, 2008, 03:13:55 AM »
I shoot DW out of mine with good results but I reload for it. This would be a good cal for Big Green to clean up but I suspect they will probly keep same manufacture and specs. Kurt
Logged
Deceased 2/16/24
https://www.dignitymemorial.com/obituaries/machesney-park-il/kurt-heckman-11671764

Sportster17M2,20"Nickle410Tamer,26"410,
WTUTI12ga,WTU25-06,M158 22RemJet, 24"Ultra.204Ruger24"UltraFluted.204Ruger
M157Mannliker.22Hornet,24".223UltraFluted,   24".223Ultra,7X64BrenekkeUltra,22-250AIUltraFluted            7.62x39,22"303Britstub.32H&Rmag, .32303BritstubHuntsman,24" SS.50calHuntsman 58calHuntsman 12gaHuntsman
NEF RevolversSSModel73.32H&Rmag                     Blued Model73.32H&R mag The herd is shrinking!!
                                 "SOLI DEO GLORIA"

Offline jpshaw

  • GBO Supporter
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1063
  • Gender: Male
Re: 360 Dan Wesson
« Reply #12 on: July 09, 2008, 03:25:45 AM »
Do any of you guys use the Hornady XTPs and if so is the throat long enough to use the first crimping grove next to the base.  I have a box for my .357 but haven't gotten around to playing with it yet since I've been working on my hunting load for my .30/30.
Logged
Pages: [1]   Go Up
« previous next »