« previous next »
Pages: [1]   Go Down

Author Topic: Look what I found on my desk at work today! ;D  (Read 733 times)

0 Members and 2 Guests are viewing this topic.

Offline KABAR2

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2830
Look what I found on my desk at work today! ;D
« on: July 07, 2008, 04:08:27 PM »
I  worked on a friends house who does wood turning,
I asked him to turn something for me in exchange for my work
This morning I found this on my desk waiting for me  ;D

 


Meet Woody! ( complete with 1 lb powder can is there for scale)



 This is the start of my wood form for sand casting a bronze Coehorn mortar  ;D 

I'll post photo's as the form continues to take shape.

next I have to find out if the local foundry will do small orders.........

Allen <>< 

Logged
Mr president I do not cling to either my gun or my Bible.... my gun is holstered on my side so I may carry my Bible and quote from it!

Sed tamen sal petrae LURO VOPO CAN UTRIET sulphuris; et sic facies tonituum et coruscationem si scias artficium

Offline Terry C.

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1215
  • Gender: Male
  • I see what you did there...
Re: Look what I found on my desk at work today! ;D
« Reply #1 on: July 07, 2008, 04:20:49 PM »
Looks good!

What scale is that? What is your proposed bore diameter?
Logged

Offline KABAR2

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2830
Re: Look what I found on my desk at work today! ;D
« Reply #2 on: July 07, 2008, 04:43:38 PM »
The minor diameter is 4 3/4"  and the major diameter is 5 1/8" overall length 9" I am thinking this should be enough for a sodacan 2.65 Dia.
Logged
Mr president I do not cling to either my gun or my Bible.... my gun is holstered on my side so I may carry my Bible and quote from it!

Sed tamen sal petrae LURO VOPO CAN UTRIET sulphuris; et sic facies tonituum et coruscationem si scias artficium

Offline 5toolman6

  • GBO Supporter
  • Trade Count: (0)
  • Member
  • *****
  • Posts: 19
Re: Look what I found on my desk at work today! ;D
« Reply #3 on: July 07, 2008, 04:55:27 PM »
Beer Can Mortars are nice.
Logged

Offline Frank46

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 707
Re: Look what I found on my desk at work today! ;D
« Reply #4 on: July 07, 2008, 05:17:15 PM »
Nice wood pattern for your mortar. Making patterns like that is becoming almost a lost art. I've seen wooden patters for pump castings, flywheels and yes even for manhole covers. Frank
Logged

Offline GGaskill

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 5668
  • Gender: Male
Re: Look what I found on my desk at work today! ;D
« Reply #5 on: July 11, 2008, 10:59:55 AM »
next I have to find out if the local foundry will do small orders...

If the local foundry won't do a short run, try to find someone who caters to sculptors as they seldom do multiples of a given piece.
Logged
GG
“If you're not a liberal at 20, you have no heart; if you're not a conservative at 40, you have no brain.”--Winston Churchill

Offline KABAR2

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2830
Re: Look what I found on my desk at work today! ;D
« Reply #6 on: July 17, 2008, 04:51:37 PM »
Well I had a few minutes  to spare before I left work so I ran into the wood shop and did a little work on the mortar



First i found center and marked the area to be scored with the band saw



next I made a series of cuts and then used one of my stock making gouges to remove the material to the contour,

when finished it wasn't deep enough so I went back to the band saw to score it deeper,

 

Then I got brave and decided to try contouring it with the bandsaw!



once done I opened it up a little with the stock making gouge



Here it is with the trunnion set in place, now that I see it in the photo
I want it a little deeper into the base of the mortar so tomorrow I'll
cut it a little deeper. At least now it is starting to look like a mortar  :)
Logged
Mr president I do not cling to either my gun or my Bible.... my gun is holstered on my side so I may carry my Bible and quote from it!

Sed tamen sal petrae LURO VOPO CAN UTRIET sulphuris; et sic facies tonituum et coruscationem si scias artficium

Offline GGaskill

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 5668
  • Gender: Male
Re: Look what I found on my desk at work today! ;D
« Reply #7 on: July 17, 2008, 08:17:58 PM »
It should go in to about half the diameter of the trunnion.
Logged
GG
“If you're not a liberal at 20, you have no heart; if you're not a conservative at 40, you have no brain.”--Winston Churchill

Offline KABAR2

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2830
Re: Look what I found on my desk at work today! ;D
« Reply #8 on: July 17, 2008, 11:17:53 PM »
Quote from: GGaskill on July 17, 2008, 08:17:58 PM
It should go in to about half the diameter of the trunnion.

Yep, that's what I was thinking.
Logged
Mr president I do not cling to either my gun or my Bible.... my gun is holstered on my side so I may carry my Bible and quote from it!

Sed tamen sal petrae LURO VOPO CAN UTRIET sulphuris; et sic facies tonituum et coruscationem si scias artficium

Offline armorer77

  • GBO Sponsor
  • Trade Count: (8)
  • A Real Regular
  • ****
  • Posts: 541
  • Gender: Male
Re: Look what I found on my desk at work today! ;D
« Reply #9 on: July 21, 2008, 01:29:35 PM »
You lucky man . Let's see more .
Logged
Pages: [1]   Go Up
« previous next »