« previous next »
Pages: [1]   Go Down

Author Topic: Aperture size on stock BC peep  (Read 410 times)

0 Members and 3 Guests are viewing this topic.

Offline kevinsmith5

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 1274
  • Gender: Male
Aperture size on stock BC peep
« on: September 07, 2008, 02:51:17 PM »
I should probably just PM this to Tim (since he probably knows), but does anybody know what size aperture the BC comes with stock?  I know I need a smaller one, but since this is my one and only peep sight and it isn't marked anywhere I can find I'm stumped as to what to order.
Logged
If he's carrying a singleshot, don't expect a warning shot!

Offline lonewolf5348

  • Trade Count: (38)
  • Senior Member
  • *****
  • Posts: 1393
Re: Aperture size on stock BC peep
« Reply #1 on: September 07, 2008, 02:57:49 PM »
I think .125
myself I use .090 for target and hunting
Logged

Offline John Boy

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 381
Re: Aperture size on stock BC peep
« Reply #2 on: September 07, 2008, 03:03:03 PM »
Kevin, if you look carefully, the Lyman aperature is marked with the size.
Logged
Regards
John Boy

Offline kevinsmith5

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 1274
  • Gender: Male
Re: Aperture size on stock BC peep
« Reply #3 on: September 07, 2008, 05:10:35 PM »
I've done everything but look at mine under a microscope.
Logged
If he's carrying a singleshot, don't expect a warning shot!

Offline Smokin Joe

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 1230
Re: Aperture size on stock BC peep
« Reply #4 on: September 07, 2008, 06:43:22 PM »
See what size drill bit you can stick through it.
Logged
Deo duce, ferro comitante
With God as my leader and my sword as my companion

Offline Chas.

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 256
Re: Aperture size on stock BC peep
« Reply #5 on: September 07, 2008, 10:21:40 PM »
A 3/32 drill fit through mine and was a good fit.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Aperture size on stock BC peep
« Reply #6 on: September 08, 2008, 12:28:44 PM »
The WGRS sight that comes on the BC is a Williams sight, so it won't be marked like the Lyman, even tho Lyman apertures will fit the WGRS. ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline kevinsmith5

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 1274
  • Gender: Male
Re: Aperture size on stock BC peep
« Reply #7 on: September 08, 2008, 01:00:03 PM »
Drill bit suggestion gave me the idea to use a screw sizer guide. Matches up to 7/64 better than 3/32.  Makes it the .125 3/8 inch disk.
Logged
If he's carrying a singleshot, don't expect a warning shot!
Pages: [1]   Go Up
« previous next »