Author Topic: Buttstock Cartridge Holders  (Read 1023 times)

0 Members and 2 Guests are viewing this topic.

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Buttstock Cartridge Holders
« on: September 18, 2008, 10:06:54 AM »
I'm tossing this out for anyone who is interested.  Within the past year, I picked up an Allen 206 Buttstock cartridge holder for my '06 Handi.  It holds 9 cartridges.  It was 3.50 at my local store.  Since then, I got five more under 4.00 each for other Handis  They're tight elastic and hold cartridges well from the centerfire .22s to the .45-70.  I have them on a.357 and a .410 also.  It works on the .17HMR  and .22 mag. also with two per sleeve, but you have to grab two or the other one falls out.

I pull them over the stock, center them where I want them, then pull it back over the sling stud about an inch.  I take a untility knife and slit the sleeve about 3/8 inch on top center of the stud, push it down over the stud and replace the swivel.  Now it can't move around much on you.

I like them because they hold 9 rounds, they're a tight fit and don't drop cartridges.  They fit the Handi stock well.  I have them on both standard and Monte Carlo, recoil pad or not.  An added advantage is that the nine round capacity increases the weight of the butt, helping with recoil, when full, in large calibers.

Cannon6, Doug, it looks like you're useing them also on the .30-30s you posted.  How do you like them?

Pete
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline Troyboy

  • GBO Supporter
  • Trade Count: (41)
  • Senior Member
  • *****
  • Posts: 1220
  • Gender: Male
  • Work more talk less
Re: Buttstock Cartridge Holders
« Reply #1 on: September 18, 2008, 10:12:59 AM »
I've got one for my 308 and my 243 and my 20 gauge. I really like mine make's reloading real "Handi"

                                                   Troy
.204 .22lr .22wm .25acp .223 5.56 .243 .25-06 6.5x55  .308  .300wbymag  7.5x54  7.62x25 7.62x39  338-06  9x19 .38spl  9x18 .45acp . 45-70 .500s&w 12rfl 12smb 20smb  .45lc 410smb .22hornet .280AI    Ask not what your country can do for you BUT what can YOU do for your country

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Buttstock Cartridge Holders
« Reply #2 on: September 18, 2008, 11:11:43 AM »
I've got a couple of the neoprene carriers, they work well and aren't noisy like cordura nylon when a branch scrapes it, they also stay put without any additional fixing, but they cost a little more.

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline canon6

  • GBO Supporter
  • Trade Count: (119)
  • Senior Member
  • *****
  • Posts: 1508
  • Gender: Male
Re: Buttstock Cartridge Holders
« Reply #3 on: September 18, 2008, 12:04:21 PM »
Pete, I have them on all of my long guns.Cheap and work well, sounds a lot like NEF's  ;D   Doug
a armed man is his own master

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26942
  • Gender: Male
Re: Buttstock Cartridge Holders
« Reply #4 on: September 18, 2008, 12:05:33 PM »
Hate them throws off the proper balance/feel of a rifle for me. I use an ammo wallet from MTM to carry my spare ammo.


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline JonnyC

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 428
Re: Buttstock Cartridge Holders
« Reply #5 on: September 18, 2008, 01:25:34 PM »
I have one on all my long guns. I only put 3 in the holders. That helps maintain the balance of the firearm. With one in the pipe- that makes 4. If I need more, I go to my fanny pack.
When I die, I want to go peacefully like my Grandfather did, in his sleep -- not screaming, like the passengers in his car.

Offline billy_56081

  • GBO Supporter
  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 8575
  • Gender: Male
Re: Buttstock Cartridge Holders
« Reply #6 on: September 18, 2008, 02:15:53 PM »
I love em on my handi, You can go though 10 rounds with an ejector barrel very fast.
99% of all Lawyers give the other 1% a bad name. What I find hilarious about this is they are such an arrogant bunch, that they all think they are in the 1%.

Offline STUMPJMPR

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 1037
Re: Buttstock Cartridge Holders
« Reply #7 on: September 18, 2008, 02:26:44 PM »
I love them I use them on all my guns.... A gun is useless without ammo and everytime I pick it up I have 9 rounds on the stock...

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Buttstock Cartridge Holders
« Reply #8 on: September 18, 2008, 02:46:48 PM »
I don't need 9 rounds for any big game rifle, I carry 2 or 3 rounds in the butt stock holder at the most, 1 is more user friendly for the very rare back up shot. I carry a few rounds in my kill bag fanny pack, but they're more for signal rounds or to replace a round that I use for a complimentary grouse than anything else.  It's a single shot, make it count.  ;)

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Stan in SC

  • Trade Count: (8)
  • A Real Regular
  • ****
  • Posts: 805
  • Gender: Male
Re: Buttstock Cartridge Holders
« Reply #9 on: September 18, 2008, 02:58:24 PM »
I use the Allen type like Petemi does but in a different way.Like GB said they seem to mess up the balance of the rifle so I use them on my belt at my waist.Conforms to my shape and is very handy there.

Stan
The more I listen,the more I hear....and vice versa.

45/70..it's almost a religion.

Offline stimpylu32

  • Moderators
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 6062
  • Gender: Male
Re: Buttstock Cartridge Holders
« Reply #10 on: September 18, 2008, 03:00:15 PM »
Pete

I have them on my 224 and 243 , the only thing I don't like is the 243's loaded with V-max bullets tend to stab me in the arm ! OUCH !!

Other than that I like them , had to get the first on in Ok as none of the local places sold them , once I got home they were everwere , go figger .  ;D

stimpy
Deceased June 17, 2015


:D If i can,t stop it with 6 it can,t be stopped

Offline JonnyC

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 428
Re: Buttstock Cartridge Holders
« Reply #11 on: September 18, 2008, 03:14:31 PM »
I tried the ones that go around your wrist, but don't like them.
When I die, I want to go peacefully like my Grandfather did, in his sleep -- not screaming, like the passengers in his car.

Offline dpe.ahoy

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 3363
  • Gender: Male
Re: Buttstock Cartridge Holders
« Reply #12 on: September 18, 2008, 06:46:32 PM »
I use them on a few of my rifles, don't seem to throw me off to much.  Helps off-set the heavy barrel for me.   Like em on the camp gun so if you see a deer sneakin by, just grab and go sneak after him.  ;)  DP
RIP Oct 27, 2017

Handi's:22Shot, 22LR, 2-22Mag, 22Hornet, 5-223, 2-357Max, 44 mag, 2-45LC, 7-30 Waters, 7mm-08, 280, 25-06, 30-30, 30-30AI, 444Marlin, 45-70, AND 2-38-55s, 158 Topper 22 Hornet/20ga. combo;  Levers-Marlins:Two 357's, 44 mag, 4-30-30s, RC-Glenfields 36G-30A & XLR, 3-35 Rem, M-375, 2-444P's, 444SS, 308 MX, 338Marlin MXLR, 38-55 CB, 45-70 GS, XS7 22-250 and 7mm08;  BLR's:7mm08, 358Win;  Rossi: 3-357mag, 44mag, 2-454 Casull; Winchesters: 7-30 Waters, 45Colt Trapper; Bolt actions, too many;  22's, way too many.  Who says it's an addiction?

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: Buttstock Cartridge Holders
« Reply #13 on: September 21, 2008, 05:59:20 AM »
I don't seem to notice any difference in balance.  The guns feel the same to me.  I just got back from a buddy's deer camp up north of Newberry MI.  Had a wonderful three days.  His daughters, 12 and 16  shot .410 and .17HMR Handis on targets and we hunted and shot a few grouse.  We had venison backstrap, grouse, and trout on the grill last evening.  It was really nice, and the girls are turning into good shots.  The cartridge holder was "Handi" when the young ladies were shooting clays.
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline dw06

  • GBO Supporter
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 1074
  • Gender: Male
Re: Buttstock Cartridge Holders
« Reply #14 on: September 21, 2008, 08:48:28 AM »
I started using them on big game rifles sometime in the mid 80s, liked them so much that I have them on every rifle I own now. I like being able to grab a gun and know the ammo for it is right there.
If you find yourself in a hole,the first thing to do is stop digging-Will Rogers