Author Topic: 308 Encore  (Read 574 times)

0 Members and 2 Guests are viewing this topic.

Offline Preacherman

  • Trade Count: (31)
  • Contributor
  • ***
  • Posts: 352
  • Gender: Male
308 Encore
« on: October 05, 2008, 02:22:11 AM »
I am looking for a good load for a 308 Win Encore for my son. Will be used for Whitetails.
Preacherman
Acts10:13

Offline Cheesehead

  • GBO Supporter
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 3282
  • Gender: Male
Re: 308 Encore
« Reply #1 on: October 05, 2008, 03:17:19 AM »
I use 43 grains of RL-15 with a 150 grain Bronze Point Remington bullet. This is a midrange load that is very accurate with moderate recoil. The barrel on my Encore is 20" long.

Cheese

Nothing in the world is more dangerous than sincere ignorance.

Offline Grumulkin

  • Trade Count: (33)
  • Senior Member
  • *****
  • Posts: 2028
    • http://www.orchardphoto.com
Re: 308 Encore
« Reply #2 on: October 05, 2008, 12:48:55 PM »
I use IMR 4064 under my 165 or 168 grain bullet of choice.

Offline Bill In SC

  • Trade Count: (2)
  • Avid Poster
  • **
  • Posts: 102
Re: 308 Encore
« Reply #3 on: October 05, 2008, 12:55:08 PM »
An excellent load that I have found for the Encore .308 in a 26" Heavy Barrel, is 45 Grains of RL15, 150 Grain Sierra Pro Hunter, sparked by a CCI200 Primer.  This load shoots consistent 3/4 groups are better off the bench at 100.  Average Velocity has been 2841 FPS.

Double checking the scope last Sunday for an upcoming trip, this load off the bench produced a .860 3 shoot group at 200 yards.  I'm not sure you can do much better than that...

Another Sub-MOA load for this barrels is 45 grains of Varget, Remington 150 Bulk Core Lokt's and again sparked by CCI 200 primers.

Both of these loads are  2/10 of a grain over max in the Sierra #5 book, however they are a 1 grain or more under max in other manuals.

Start low, and work up to it and see how it reacts in your firearm.

~ Bill ~