Author Topic: 45 Colt Bullet  (Read 1239 times)

0 Members and 1 Guest are viewing this topic.

Offline 45Spades

  • Trade Count: (0)
  • Member
  • *
  • Posts: 23
45 Colt Bullet
« on: October 10, 2008, 09:22:15 AM »
Veral,

I am have a Ruger SS Bisley that has had the cylinder throats opened to .4525 and the barrel measures .451.  I am leaning heavily towards a 325 grain WLNGC bullet.

What bullet measurements do you recommend for a 4 cavity mold?

Thanks
First figure out what it is and what it ain't and thats generally a good place to start.

Offline Veral

  • GBO Sponsor
  • Moderator
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1675
    • Lead Bullet Technology
Re: 45 Colt Bullet
« Reply #1 on: October 10, 2008, 05:06:29 PM »
  Give me your cylinder throat diameter and I'll guarantee that the bullets will be large enough to size for a perfect fit.  The WLN 325 gr is the meanest hardest hitting bullet in the world for the Blackhawk if you load it to full power.  It will do 1500 fps quite easily, which is meaner than any North American animal needs, at either end of the gun.  If you get a 280 or 300 gr WFN and load it to somewhere between 1200 and 1400 fps the critters will be ready for skinning just as quickly as with the big power, and you'll probably be able to shoot more accurately.  Pain has a way of makeing shooters blink and flinch when putting pressure on the trigger, so I hear anyhow. 

  By the way.  For those who crave max power, a 350 gr WLN is the meanest in the long cylinder guns, like Redhawks, Anaconda, etc., where a .5 nose length will chamber without extending past the cylinder mouths.
Veral Smith