Author Topic: A couple of cannon-related flea market item...  (Read 1261 times)

0 Members and 6 Guests are viewing this topic.

Offline Terry C.

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1215
  • Gender: Male
  • I see what you did there...
A couple of cannon-related flea market item...
« on: November 09, 2008, 03:32:59 PM »
Picked up a couple of items at a large flea market yesterday. No cannons there. I did run across a guy selling ridiculously overpriced relics who had a couple of iron shot. They weren't 'cannonballs' as he claimed, too small and roughly cast, probably grapeshot. He wanted to keep them a lot worse than I wanted to buy them.

I've been looking for a small barrel to serve as a display powderkeg. The only thing I found was this old Briggs tobacco barrel:




Engraving closeup:




It's too large to be correct scale for a powderkeg, but not as a storage barrel. With its removeable lid, it'll make a good container for small accessories:




The other thing I bought is this iron wine bottle holder:




Reminded me of this miniature (airline bottle size) that I have:




I don't drink, but it can hold my big bottle of locally produced Georgia Cane Syrup.

:) :D ;D

Offline cannonmn

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 3345
Re: A couple of cannon-related flea market item...
« Reply #1 on: November 09, 2008, 06:25:55 PM »
Quote
The other thing I bought is this iron wine bottle holder:

Perhaps a model of the original demi-cannon?






jeje

Offline Terry C.

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1215
  • Gender: Male
  • I see what you did there...
Re: A couple of cannon-related flea market item...
« Reply #2 on: November 12, 2008, 02:16:02 PM »
I finally got around to measuring the barrel, it's 7.188" high x 5.450" bilge diameter.

In relation to the quarter-scale Napoleon, a full-sized barrel would be approximately 28¾" high x 21¾" bilge diameter.

According to my research, this is roughly the size of a 30 gallon whiskey barrel.






Offline Terry C.

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1215
  • Gender: Male
  • I see what you did there...
Re: A couple of cannon-related flea market item...
« Reply #3 on: December 12, 2008, 03:03:59 PM »
I didn't realize that over a month had passed.

I've been wanting to get a photo of the wine caddy in action. Problem is, wine is an extremely scarce commodity around here. I don't drink at all (even when I did, I didn't drink wine) and the wife very rarely does.

I finally went out and bought a bottle, just for a photo. Then it got pushed aside and forgotten for a week.


But finally I took the time to set up a photo of the cast iron wine caddy with a bottle of Aussie Yellow Tail Chardonnay on board.




Now I can give the bottle to my wife. And she'll probably welcome it seeing as how she's freshly unemployed.

And will probably never see her final paycheck (two full weeks plus overtime).

She's not happy...

Offline Cannoneer

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3950
Re: A couple of cannon-related flea market item...
« Reply #4 on: December 12, 2008, 06:38:07 PM »
Terry,
 
Sorry to here about your wife losing her job, I hope things work out for the best.

You recently had a post about a brass .75 cal. ball mold you had picked up somewhere, but I can't find the thread; would you give me a hand here?
RIP John. While on vacation July 4th 2013 in northern Wisconsin, he was ATVing with family and pulled ahead of everyone and took off at break-neck speed without a helmet. He lost control.....hit a tree....and the tree won.  He died instantly.

The one thing that you can almost always rely on research leading to, is more research.

Offline Terry C.

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1215
  • Gender: Male
  • I see what you did there...
Re: A couple of cannon-related flea market item...
« Reply #5 on: December 13, 2008, 02:11:58 AM »
Terry,
 
Sorry to here about your wife losing her job, I hope things work out for the best.

You recently had a post about a brass .75 cal. ball mold you had picked up somewhere, but I can't find the thread; would you give me a hand here?

The link below should take you directly to the post.

If it doesn't, find the thread Book for cannon model builders started by cannomn, and scroll down to reply #27.

LINK


Yeah the wife is bummed. She loved that job (daycare) and the kids she cared for. A lot of these kids came from less than stellar home environments and Pam was sometimes the most stable person in their lives.

But when the bank comes'a knockin'...

Offline Cannoneer

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3950
Re: A couple of cannon-related flea market item...
« Reply #6 on: December 13, 2008, 09:00:20 PM »
Thanks, Terry.
RIP John. While on vacation July 4th 2013 in northern Wisconsin, he was ATVing with family and pulled ahead of everyone and took off at break-neck speed without a helmet. He lost control.....hit a tree....and the tree won.  He died instantly.

The one thing that you can almost always rely on research leading to, is more research.

Offline Blaster

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 637
  • Gender: Male
Re: A couple of cannon-related flea market item...
« Reply #7 on: December 14, 2008, 04:18:39 AM »
When I saw the picture of the bottle holding cannon carriage that Terry posted, it reminded me of this little decorator that I have had for a while now.
It has to be from the same fabricator and it is all cast iron.
Blaster (Bob in So. CO)

Graduate of West Point (West Point, Iowa that is)

Offline cannonmn

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 3345
Re: A couple of cannon-related flea market item...
« Reply #8 on: December 14, 2008, 04:31:49 AM »
That same iron decorator carriage design was originally sold with a brass barrel.  I saw those for sale in the UK back around 1970.  I had not seen any of the iron barrel versions until recently.

Offline Terry C.

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1215
  • Gender: Male
  • I see what you did there...
Re: A couple of cannon-related flea market item...
« Reply #9 on: December 14, 2008, 04:58:30 AM »
Very similar, almost identical even, but enough subtle differences to tell that they weren't cast from the same pattern.

I've been considering making a non-firing display barrel for this one, since it won't see much (if any) use for its intended purpose beyond a few novelty photos.

It has a little more rust on it than what shows in the photos. It needs to be disassembled, cleaned, and repainted. While it's down I plan to make tracings of the plates.


I might even use it as a porch ornament, but it'll have to be fastened down or it may get stolen.

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12609
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: A couple of cannon-related flea market item...
« Reply #10 on: December 14, 2008, 05:04:06 AM »
I've been considering making a non-firing display barrel for this one,

Why? Why non-firing?   ;D

Offline Terry C.

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1215
  • Gender: Male
  • I see what you did there...
Re: A couple of cannon-related flea market item...
« Reply #11 on: December 14, 2008, 06:11:15 AM »
Why? Why non-firing?   ;D

I'm not sure how much abuse these iron plates could handle.

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12609
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: A couple of cannon-related flea market item...
« Reply #12 on: December 14, 2008, 07:50:00 AM »
Why? Why non-firing?   ;D

I'm not sure how much abuse these iron plates could handle.

So how are you gonna know if you don't find out?   ;D