« previous next »
Pages: [1]   Go Down

Author Topic: .270 & 110 grain Seirra  (Read 529 times)

0 Members and 1 Guest are viewing this topic.

Offline pmang

  • Trade Count: (0)
  • Member
  • *
  • Posts: 38
.270 & 110 grain Seirra
« on: November 24, 2008, 04:48:00 PM »
I have been looking around on this board to see what powder you guy's use when you load your .270 with the 110 grain Seirra's. I have some 4064 I use for my .243.

Would you recommend something else?

Thanks in advance.
Logged

Offline OR-E-Gun Bill

  • GBO Supporter
  • Trade Count: (18)
  • A Real Regular
  • *****
  • Posts: 907
  • Gender: Male
Re: .270 & 110 grain Seirra
« Reply #1 on: November 24, 2008, 05:16:52 PM »
The IMR-4064 should work just fine in your .270. The Lyman 48th selected it as the most accurate in their data testing using a universal receiver with the Sierra 110 gr. SPT.
If you have some Varget, that is another option.
 

Bill
Logged

Offline bilmac

  • GBO Supporter
  • Trade Count: (14)
  • Senior Member
  • *****
  • Posts: 3560
  • Gender: Male
Re: .270 & 110 grain Seirra
« Reply #2 on: November 24, 2008, 06:23:36 PM »
I shot Hornaday 110s with 4350. Made sub moa groups occasionally. But then, Lyman accuracy loads are usually hard to beat too.
Logged

Offline Siskiyou

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3417
  • Gender: Male
Re: .270 & 110 grain Seirra
« Reply #3 on: November 24, 2008, 07:34:38 PM »
I was loading the 110-grain Sierra for my son many years ago and had good results with H-4831.  46th Edition of the Lyman Manual shows H4831 potentially being the most accurate. 
Logged
There is a learning process to effectively using a gps.  Do not throw your compass and map away!

Boycott: San Francisco, L.A., Oakland, and City of Sacramento, CA.

Offline Catfish

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2696
Re: .270 & 110 grain Seirra
« Reply #4 on: November 25, 2008, 03:59:00 AM »
A .270 was my first center fire varmint rifle. My load of choice was a case full of H-4831. Back then I was paying  $ 1 a lb. for it.  :'(
Logged

Offline bilmac

  • GBO Supporter
  • Trade Count: (14)
  • Senior Member
  • *****
  • Posts: 3560
  • Gender: Male
Re: .270 & 110 grain Seirra
« Reply #5 on: November 25, 2008, 04:14:10 AM »
You was robbed, we bought a 50 # keg for 86 cents.
Logged

Offline bilmac

  • GBO Supporter
  • Trade Count: (14)
  • Senior Member
  • *****
  • Posts: 3560
  • Gender: Male
Re: .270 & 110 grain Seirra
« Reply #6 on: November 25, 2008, 04:16:57 AM »
And that was a good load, you almost didn't need a measure or scale just fill the case up and tip out enough that you did'nt completely cruch the powder, and stick a bullet on top.
Logged

Offline pmang

  • Trade Count: (0)
  • Member
  • *
  • Posts: 38
Re: .270 & 110 grain Seirra
« Reply #7 on: November 25, 2008, 07:44:56 AM »
I guess I left some info out. I am also looking for a powder for 130 and 150 grain bullets as well. So maybe I want to go with H4831 as my all around on the .270?
Logged

Offline bilmac

  • GBO Supporter
  • Trade Count: (14)
  • Senior Member
  • *****
  • Posts: 3560
  • Gender: Male
Re: .270 & 110 grain Seirra
« Reply #8 on: November 25, 2008, 08:39:59 AM »
No I wouldn't, we were reminising about cheap.  H4831 will cost you some velocity with lighter bullets, and it wasn't my most accurate, it was just cheap, and when you're shooting highpower silhoette on a beginning employees salery you have a different set of priorities.
Logged

Offline pmang

  • Trade Count: (0)
  • Member
  • *
  • Posts: 38
Re: .270 & 110 grain Seirra
« Reply #9 on: November 25, 2008, 03:25:16 PM »
What do most guy's use for powder with the 130s and 150s?

I guess i'll use to he 4064 for the 110s.
Logged

Offline bilmac

  • GBO Supporter
  • Trade Count: (14)
  • Senior Member
  • *****
  • Posts: 3560
  • Gender: Male
Re: .270 & 110 grain Seirra
« Reply #10 on: November 25, 2008, 05:33:38 PM »
The old Jack OConner load with 4064 always shot 130s very well for me. I think we're not supposed to post loads on these threads, and I think his load was a bit higher than modern loading manuals show, but with good bullets I could count on groups around an inch. 4350 shoots 150s very well, and will also make pretty good 130 gr loads. I don't think 4064 will push your 150 gr bullets at top speed.
Logged

Offline BBF

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 10042
  • Gender: Male
  • I feel much better now knowing it will get worse.
Re: .270 & 110 grain Seirra
« Reply #11 on: November 26, 2008, 03:54:02 AM »
H-4831 for 130 gr. and up.
Logged
What is the point of Life if you can't have fun.
Pages: [1]   Go Up
« previous next »