Author Topic: Factory ammo for BC  (Read 567 times)

0 Members and 2 Guests are viewing this topic.

Offline Westbound

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 307
  • Gender: Male
Factory ammo for BC
« on: December 19, 2008, 03:18:25 AM »
I'll be heading over to Cabela's to pick up a few boxes of 45-70 for my new gun and head to the range on Saturday.
I know each gun will have different preferences, but what have you guys had the most luck with as far as factory loads in the BC?

I plan to start handloading for this round, but it might be a few weeks before i get dies and components.

Offline mgunslinger

  • Trade Count: (0)
  • Member
  • *
  • Posts: 18
Re: Factory ammo for BC
« Reply #1 on: December 19, 2008, 06:53:34 AM »
The only factory ammo that I have used in my BC is the Black Hills Cowboy ammo. It is a 405 gr bullet and it was a pretty load for me to get started. I took all of the Factory brass and that is how I started pressing my own loads. I am now running Black Powder loads and am really enjoying it.. Congrats and good luck..
mgunslinger

Offline Big Blue

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1334
  • Gender: Male
Re: Factory ammo for BC
« Reply #2 on: December 19, 2008, 07:51:17 AM »
I've had the best accuracy in my BC using Winchesters Supreme 300gr. Partition Gold. It's pricey, but accurate.
Don

Offline Westbound

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 307
  • Gender: Male
Re: Factory ammo for BC
« Reply #3 on: December 19, 2008, 12:02:28 PM »
I just stopped by Cabela's and got a box of each:

Remington 405gr SP
Hornaday 325 Leverevolution
Ultramax 405 RNFP  - i've shot their 45LC 250gr. me and the SAA clone both prefer these to any other.  hope their rifle ammo is just as good!

I should be going to the range in the morning.  I'll post a report after I get to shoot my new baby!

Offline Badnews Bob

  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 2963
  • Gender: Male
Re: Factory ammo for BC
« Reply #4 on: December 19, 2008, 12:32:34 PM »
Those remmy green box 405s have been a steady performer in all of my .45-70s, But I only shoot reloads now.
Badnews Bob
AE-2 USN retired

Offline LONGTOM

  • Trade Count: (391)
  • Senior Member
  • *****
  • Posts: 4644
  • Gender: Male
  • IF ONLY I COULD GO BACK-I WOULD BE A MOUNTAIN MAN!
Re: Factory ammo for BC
« Reply #5 on: December 19, 2008, 12:41:41 PM »
None of my 5 45-70s like the Leverevolution ammo.
The best one is my 1886 Win which will do about 3" at 100.
All 3 H&Es, my Win 1886 & my Win 1885 Highwall all seem to do good with factory Win 300JHPs.
The 22" Handi is the best at just under 1" and one of the BCs is the worst at just over 2.25".


LONGTOM
NRA Benefactor Life Member
NAHC Life Member
NRA Member-JAMES MADISON BRIGADE
IWLA Member
NRA/ILA Member
CCRKBA Member
US OLIMPIC SHOOTING TEAM supporter

"THE TREE OF LIBERTY FROM TIME TO TIME MUST BE REFRESHED WITH THE BLOOD OF PATRIOTS AND TYRANTS".
THOMAS JEFFERSON

That my two young sons may never have to know the horrors of war. 

I will stand for your rights as my forefathers did before me!
My thanks to those who have, are and will stand for mine!
To those in the military, I salute you!

LONGTOM 9-25-07

Offline Westbound

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 307
  • Gender: Male
Re: Factory ammo for BC
« Reply #6 on: December 19, 2008, 01:25:49 PM »
I've heard mixed reviews on the leverevolutions, but they're cheaper than the remingtons by a couple of bucks, so I'll give them one box to prove themselves on way or the other.
after christmas, i'm going to pull my reloading equipment out of storage and try my hand at the rifle cartridge.
many moons ago i reloaded some 45LCs for my SAA clone.  Hopefully the 45-70 wont be any more challenging.

Offline Badnews Bob

  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 2963
  • Gender: Male
Re: Factory ammo for BC
« Reply #7 on: December 19, 2008, 02:40:16 PM »
>45-70 is real easy to reload for, kinda like .45 colts big brother. 8)
Badnews Bob
AE-2 USN retired

Offline oneshotonekill

  • Trade Count: (15)
  • A Real Regular
  • ****
  • Posts: 503
Re: Factory ammo for BC
« Reply #8 on: December 20, 2008, 02:36:02 AM »
Those remmy green box 405s have been a steady performer in all of my .45-70s, But I only shoot reloads now.

Same for me.  The green box remmy 405's shot great out of my BC, then I used the brass and loaded up a bunch of 405 rem's to try and match the green box load.  My load clock a few more fps on the chrono but they shoot good.

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26942
  • Gender: Male
Re: Factory ammo for BC
« Reply #9 on: December 20, 2008, 09:38:28 AM »
Like mgunslinger the only factory load fired in mine was the Black Hills CAS ammo. Very accurate and didn't kick like the higher powered stuff but has plenty of punch to take game. I've heard pretty much only good on the Remington ammo as well. I suspect those two would do all I'd ever ask of a .45-70. My shoulder won't take more than that anyway. These days it's getting so bad that it just can't deal with recoil.


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!