« previous next »
Pages: [1]   Go Down

Author Topic: Need 32-20 advice.  (Read 444 times)

0 Members and 2 Guests are viewing this topic.

Offline Spanky

  • Moderators
  • Trade Count: (96)
  • Senior Member
  • *****
  • Posts: 4627
  • Gender: Male
  • USMC Semper Fidelis
Need 32-20 advice.
« on: January 05, 2009, 02:31:42 PM »
I am currently shooting 100 gr. Winchester ammo. in my single shot Handi 32-20 and am thinking of reloading the cases with 150 gr. Hornady spire points with .312 dia.
I made up a dummy round with said bullet crimped at the cannelure and it chambered and ejected fine.
There is nothing wrong with the 100 gr. bullets, I just want to try a heavier bullet for coyotes and targets.
What do you guys think??
Do you see any problems working up a load using the 150's??
Any advice is appreciated.



Spanky
Logged

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: Need 32-20 advice.
« Reply #1 on: January 05, 2009, 02:35:34 PM »
Well, your not going to get them moving too fast. but just target stuff, NO I don't see a problem...

Some time back I remember reading a story about ultra heavy for caliber bullets... leveraction rifles maybe..I don't remember for sure....

What is it that your trying to achieve?

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline Spanky

  • Moderators
  • Trade Count: (96)
  • Senior Member
  • *****
  • Posts: 4627
  • Gender: Male
  • USMC Semper Fidelis
Re: Need 32-20 advice.
« Reply #2 on: January 05, 2009, 03:01:51 PM »
Quote from: cwlongshot on January 05, 2009, 02:35:34 PM
Well, your not going to get them moving too fast. but just target stuff, NO I don't see a problem...

Some time back I remember reading a story about ultra heavy for caliber bullets... leveraction rifles maybe..I don't remember for sure....

What is it that your trying to achieve?

CW


I'm not really trying to gain anything, just want to try something different. I like the idea of a little heavier bullet for coyotes up close from a ground blind. Mostly for shooting paper though. Just one of those "can I do it" things.


Spanky
Logged

Offline Lone Star

  • Reformed Gunwriter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2359
  • Gender: Male
Re: Need 32-20 advice.
« Reply #3 on: January 05, 2009, 03:06:13 PM »
I doubt that you can get them moving fast enough for the 1:20" twist to stabilize them well - unless you have a tighter twist rate in your Handi barrel.  They will not expand in a coyote anyway.  Better to try a lighter bullet designed for the 7.62x39 if you want accuracy and expansion.



.
Logged

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: Need 32-20 advice.
« Reply #4 on: January 05, 2009, 03:17:02 PM »
I bought a thousand very nice 115 SWC's some years back just for this purpose...

 I'll check the box and see if I can get you a pic of a bulet and the box tomarrow if you would like to see them...

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline Spanky

  • Moderators
  • Trade Count: (96)
  • Senior Member
  • *****
  • Posts: 4627
  • Gender: Male
  • USMC Semper Fidelis
Re: Need 32-20 advice.
« Reply #5 on: January 05, 2009, 03:19:24 PM »
Quote from: Lone Star on January 05, 2009, 03:06:13 PM
I doubt that you can get them moving fast enough for the 1:20" twist to stabilize them well - unless you have a tighter twist rate in your Handi barrel.  They will not expand in a coyote anyway.  Better to try a lighter bullet designed for the 7.62x39 if you want accuracy and expansion.



.


My barrel is 1:10" twist.


Spanky
Logged

Offline Steve P

  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 1733
  • Gender: Male
Re: Need 32-20 advice.
« Reply #6 on: January 07, 2009, 07:07:07 AM »
AA1680 10-12 grains should get you a starting point.  Check AA manual for more load data.

10.0 grains of AA1680 with RCBS 165 Silhouette in my .32 mag has a rainbow trajectory, but knocks over 60 pound steel rams at 200 meters. 

I have some hotter loads with 4227 and 296, but do not recall them off the top of my head.  Most of my favorite loads were the milder ones that didn't have all the recoil.

Steve :)
Logged
"Life is a play before an audience of One.  When your play is over, will your audience stand and applaude, or stay seated and cry?"  SP 2002

Offline Spanky

  • Moderators
  • Trade Count: (96)
  • Senior Member
  • *****
  • Posts: 4627
  • Gender: Male
  • USMC Semper Fidelis
Re: Need 32-20 advice.
« Reply #7 on: January 07, 2009, 08:09:59 AM »
Quote from: Steve P on January 07, 2009, 07:07:07 AM
AA1680 10-12 grains should get you a starting point.  Check AA manual for more load data.

10.0 grains of AA1680 with RCBS 165 Silhouette in my .32 mag has a rainbow trajectory, but knocks over 60 pound steel rams at 200 meters. 

I have some hotter loads with 4227 and 296, but do not recall them off the top of my head.  Most of my favorite loads were the milder ones that didn't have all the recoil.

Steve :)


Thanks for the info. Steve.
I'll check it out. ;D


Spanky
Logged
Pages: [1]   Go Up
« previous next »