Author Topic: Where can I buy a figured, semi finished Winchester Buttstock  (Read 1038 times)

0 Members and 1 Guest are viewing this topic.

Offline skarke

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1190
Where can I buy a figured, semi finished Winchester Buttstock
« on: January 20, 2009, 01:23:35 AM »
My nephew has a 94 with a crack at the lower buttplate screw.  The rifle was purchased used, and otherwise, it +95%.  The stock could have been repaired perfectly if done right, but noooooooo!  The previous owner must've been in a hurry.  Slap a little acraglas on it with scotch tape, and voila, it's stuck for life.  Arghhh :-\

So, weve done a serviceable refinish (quite nice, really) with tru oil, but new furniture would be better.

Any good vendors that will provide a quality, semi-figured, semi-inletted piece for a reasonable price?

Freedom is never more than one generation away from extinction. We didn’t pass it on to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children what it was once like in the United States when men were free.  Ronaldus Maximus

Offline LONGTOM

  • Trade Count: (391)
  • Senior Member
  • *****
  • Posts: 4644
  • Gender: Male
  • IF ONLY I COULD GO BACK-I WOULD BE A MOUNTAIN MAN!
Re: Where can I buy a figured, semi finished Winchester Buttstock
« Reply #1 on: January 20, 2009, 02:59:32 AM »
Most any of the stock makers offer a replacement.
Just check around.
Also check out EBAY.
They almost always have model 94 stocks on there for sale.


LONGTOM
NRA Benefactor Life Member
NAHC Life Member
NRA Member-JAMES MADISON BRIGADE
IWLA Member
NRA/ILA Member
CCRKBA Member
US OLIMPIC SHOOTING TEAM supporter

"THE TREE OF LIBERTY FROM TIME TO TIME MUST BE REFRESHED WITH THE BLOOD OF PATRIOTS AND TYRANTS".
THOMAS JEFFERSON

That my two young sons may never have to know the horrors of war. 

I will stand for your rights as my forefathers did before me!
My thanks to those who have, are and will stand for mine!
To those in the military, I salute you!

LONGTOM 9-25-07

Offline skarke

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1190
Re: Where can I buy a figured, semi finished Winchester Buttstock
« Reply #2 on: January 20, 2009, 01:27:17 PM »
Thanks Longtom, I appreciate the help.  My problem is that I do not know of companies that sell semi-inletted, semi-figured wood.  There are a few that sell straight grain, semi-inletted wood, for about $50.  Still others sell great stocks for $175 to $250.  What I can't find is a company that has "the next grade up" from basic straight grain.  Really, I'd like a 25% to 50% figure.  Wood for blanks is REALLY cheap right now, even in presentation grade, but I don't have the time or the will to take one from a chunck of wood to a finished stock.

So, WHO sells semi-figured, semi-inletted wood for a 94 for <$100?

That information would be great.

BTW, Ebay does have a few 94 stocks available most of the time, but they are usually beat up take offs, or NIB and expensive.  Same problem, nothing in the middle.
Freedom is never more than one generation away from extinction. We didn’t pass it on to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children what it was once like in the United States when men were free.  Ronaldus Maximus

Offline J'hawker

  • Trade Count: (0)
  • Member
  • *
  • Posts: 68
  • Gender: Male
Re: Where can I buy a figured, semi finished Winchester Buttstock
« Reply #3 on: January 20, 2009, 01:28:08 PM »
Well done is better than well said....Benjamin Franklin

Offline skarke

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1190
Re: Where can I buy a figured, semi finished Winchester Buttstock
« Reply #4 on: January 20, 2009, 01:36:31 PM »
Thanks Jhawker, that's more like it.  I'd appreciate any other tips, but these guys look like they fit the bill.
Freedom is never more than one generation away from extinction. We didn’t pass it on to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children what it was once like in the United States when men were free.  Ronaldus Maximus

Offline deerhunter1981

  • Trade Count: (0)
  • Member
  • *
  • Posts: 65
  • Gender: Male
Re: Where can I buy a figured, semi finished Winchester Buttstock
« Reply #5 on: January 22, 2009, 08:36:51 AM »
Not to steal this thread, but I'm looking for a stock set for my .444 BB 94AE. Been looking around, but no one specifies if it is for a 30-30 or BB cal. ??

Anyone know a dealer who might have a fitted stock set for my rifle?

Offline Blackhawk44

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 981
Re: Where can I buy a figured, semi finished Winchester Buttstock
« Reply #6 on: January 22, 2009, 02:20:48 PM »
Wenig's or Gunstocks, Inc.

Offline RayO

  • Trade Count: (1)
  • Member
  • *
  • Posts: 47

Offline Hank08

  • Trade Count: (35)
  • A Real Regular
  • ****
  • Posts: 887
Re: Where can I buy a figured, semi finished Winchester Buttstock
« Reply #8 on: January 30, 2009, 06:38:51 AM »
Numrich Gun Parts have or had all of the Winchester factory 94 stocks.  I bought some with great figure, factory finished with buttplate for $16.  may still have some.
H08

Offline skarke

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1190
Re: Where can I buy a figured, semi finished Winchester Buttstock
« Reply #9 on: January 31, 2009, 03:18:59 PM »
Hank08...Awesome!!!!!
Freedom is never more than one generation away from extinction. We didn’t pass it on to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children what it was once like in the United States when men were free.  Ronaldus Maximus

Offline Flash

  • Trade Count: (82)
  • Senior Member
  • *****
  • Posts: 2285
  • Gender: Male
Re: Where can I buy a figured, semi finished Winchester Buttstock
« Reply #10 on: January 31, 2009, 10:59:12 PM »
Richards micro-fit
What doesn't kill us, makes us stronger!

Offline skarke

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1190
Re: Where can I buy a figured, semi finished Winchester Buttstock
« Reply #11 on: February 02, 2009, 02:25:37 AM »
Thanks Flash,

Richards only makes one piece stocks, but they have really nice stuff.
Freedom is never more than one generation away from extinction. We didn’t pass it on to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children what it was once like in the United States when men were free.  Ronaldus Maximus