Author Topic: Nickel plated brass?  (Read 1097 times)

0 Members and 2 Guests are viewing this topic.

Offline kevinsmith5

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 1274
  • Gender: Male
Nickel plated brass?
« on: January 20, 2009, 04:09:29 PM »
I know theoreticlly the nickel resists corrosion. Is it worth paying the extra? Are there any drawbacks? does the case hold as much powder?
If he's carrying a singleshot, don't expect a warning shot!

Offline John Boy

  • Moderator
  • Trade Count: (0)
  • Contributor
  • *****
  • Posts: 381
Re: Nickel plated brass?
« Reply #1 on: January 24, 2009, 02:34:28 PM »
Kevin, I have 20 R-P plated cases out of close to 700 brass 45-70 cases.  I mix them in with the regular brass for practicing.  Past 3 years using them: no splits - pour the same powder charge - shoot like the regulars but they do clean up quicker in the wash water and vibrator.  Never bought anymore because to me - they just don't look right in the loading tray or in the cartridge box next to the golden colored brass ones. It's only a personal thing 
Regards
John Boy

Offline Sir Charles deMoutonBlack

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 323
Re: Nickel plated brass?
« Reply #2 on: January 24, 2009, 08:31:21 PM »
Johnboy;  I need some .32-20 cases for my Russian Nagant revolver.  All I can locate are R-P nickeled one from Mid-South.  You figured they'd be OK?

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26947
  • Gender: Male
Re: Nickel plated brass?
« Reply #3 on: January 25, 2009, 05:45:40 AM »
Nickel plated cases have never given me a problem. I know folks talk of flaking of the plating but I've never seen it on the brass I've used. I've used cases until it wore so thin you could hardly tell any was left and the cases were still just fine and the plating still didn't flake it just wore thin.


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline BBF

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 10042
  • Gender: Male
  • I feel much better now knowing it will get worse.
Re: Nickel plated brass?
« Reply #4 on: January 25, 2009, 08:16:43 AM »
I use them in .243 Win, 30-06, 44 Rem and 45-70. The only difference I see in loading and seizing them is that it takes a bit more pressure to trim and chamfer them. I have a universal flaring tool which I prefer to use. The nickel stuff can damage the base of bullets if the mouth of the cases are not prepared.
What is the point of Life if you can't have fun.

Offline kevinsmith5

  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 1274
  • Gender: Male
Re: Nickel plated brass?
« Reply #5 on: January 27, 2009, 02:41:46 PM »
I've ordered 20 for my 45-70 to use exclusively for BP. 
If he's carrying a singleshot, don't expect a warning shot!

Offline John Boy

  • Moderator
  • Trade Count: (0)
  • Contributor
  • *****
  • Posts: 381
Re: Nickel plated brass?
« Reply #6 on: January 28, 2009, 12:24:07 PM »
Quote
You figured they'd be OK?
Sir Charles - I see no reason why not.  Plus you get style points ;D
Regards
John Boy

Offline R Jones

  • Trade Count: (0)
  • Member
  • *
  • Posts: 41
  • Gender: Male
Re: Nickel plated brass?
« Reply #7 on: February 22, 2009, 10:06:28 AM »
I have 100 nickel .45-70 cases that I use for BPCR exclusively. They last really well, and I don't have to worry about getting a hot Marlin load mixed in with them!!    R Jones
I remain, R Jones

Offline John Boy

  • Moderator
  • Trade Count: (0)
  • Contributor
  • *****
  • Posts: 381
Re: Nickel plated brass?
« Reply #8 on: March 12, 2009, 05:13:59 PM »
Sir Charles - Starline has 32-20 brass and they are not plated
Regards
John Boy