Author Topic: 2009 News?  (Read 1448 times)

0 Members and 2 Guests are viewing this topic.

Offline xhare

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 587
2009 News?
« on: February 02, 2009, 04:19:59 PM »
I could not find if this has been covered.  Has there been any news on new offerings for 2009 (or elimination)s?  Anything new on display at the 2009 SHOT Shot?







Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 2009 News?
« Reply #1 on: February 02, 2009, 05:11:56 PM »
There was nothing new at the show, but they're working on some more combos, bringing back a modernized version of the Hunstman/Sidekick, maybe a 17 Rem Fireball accessory barrel and a low profile hammer with a different hammer extension.

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26942
  • Gender: Male
Re: 2009 News?
« Reply #2 on: February 02, 2009, 05:31:18 PM »
You'd think with all the votes the .35 Rem got in your poll it would be added. If it is not then they really do not care what you guys want they are gonna give you what they want you to have and expect you to like it.


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 2009 News?
« Reply #3 on: February 02, 2009, 05:54:39 PM »
The 35s are still up in the air, those were my suggestions to them to consider along with the 17 FB which was their idea.  ;)

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline PigBoy Crabshaw

  • GBO Supporter
  • Trade Count: (2)
  • Contributor
  • *****
  • Posts: 436
  • Gender: Male
Re: 2009 News?
« Reply #4 on: February 02, 2009, 06:57:19 PM »
I'm still waiting on that 35Rem  ;D -g
"In God We Trust - Everyone else keep you hands where I can see them!"

Offline xhare

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 587
Re: 2009 News?
« Reply #5 on: February 02, 2009, 07:36:39 PM »
With the transitions occuring due to the Remington purchase I can understand why there aren't that many big changes/additions.  Although the lower hammer profile would be a big improvement.

Still, I am a bit disappointed at the lack of new products.

Offline Troyboy

  • GBO Supporter
  • Trade Count: (41)
  • Senior Member
  • *****
  • Posts: 1220
  • Gender: Male
  • Work more talk less
Re: 2009 News?
« Reply #6 on: February 03, 2009, 01:02:09 PM »
New products? I'm still trying to get the old products
.204 .22lr .22wm .25acp .223 5.56 .243 .25-06 6.5x55  .308  .300wbymag  7.5x54  7.62x25 7.62x39  338-06  9x19 .38spl  9x18 .45acp . 45-70 .500s&w 12rfl 12smb 20smb  .45lc 410smb .22hornet .280AI    Ask not what your country can do for you BUT what can YOU do for your country

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 2009 News?
« Reply #7 on: February 03, 2009, 01:10:28 PM »
Remington is investing time, money and resources in getting the new plant running good and improving what they already offer with better fit and finish, they'll get to the new stuff once they have the plant up to speed, I'm expecting an update on that any time.  ;)

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Rustyinfla

  • GBO Supporter
  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 1744
Re: 2009 News?
« Reply #8 on: February 04, 2009, 05:38:53 AM »


  I didn't have time to go myself but I had a friend go and ask questions for me. I live less than an hour from where they had the show. He covered all the bases. talked to the folks at remington, Marlin, and NEF just to see if anyone of them had any information the others didn't. All basically said the same thing... no news, no changes.

  I've been gone for a week now, had to go to KY on an emergency load to cover needs for the ice storm they had up there. I know Sourdough was going to go has he checked back in yet? He might have asked more specific questions.
If you're gonna be stupid ya gotta be tuff

Offline tykempster

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 798
  • I enjoy long range shooting and big guns.
Re: 2009 News?
« Reply #9 on: February 04, 2009, 04:49:46 PM »
They should offer some nostalgic big bore cartridges...some of the small NE rounds and maybe 405 Winchester...375 H&H Flanged...anything else big with a rim!

Offline Spanky

  • Moderators
  • Trade Count: (96)
  • Senior Member
  • *****
  • Posts: 4627
  • Gender: Male
  • USMC Semper Fidelis
Re: 2009 News?
« Reply #10 on: February 05, 2009, 06:08:50 AM »
They should offer some nostalgic big bore cartridges...some of the small NE rounds and maybe 405 Winchester...375 H&H Flanged...anything else big with a rim!


It'd be nice if they brought back the 38-55 target with proper bore and chamber specs.
Even a good 22" barrel in 38-55 would be nice.


Spanky

Offline Ireload2

  • Trade Count: (10)
  • Contributor
  • ***
  • Posts: 342
Re: 2009 News?
« Reply #11 on: February 05, 2009, 08:53:15 AM »
It would be nice if they gave a mechanical engineer 2 months and a manufacturing engineer 6 months to go back and re-engineer the design and change the production tooling and processes.
Then up rev the model number with interchangable barrels and all that factory fitting stuff would be history.
This would reduce their costs substantially.
I know a sucky design when I see one. Remington has the resources to fix this one. So hopefully the lull is a design clean up period.

Offline willyjohn

  • Trade Count: (5)
  • Member
  • *
  • Posts: 48
  • Gender: Male
Re: 2009 News?
« Reply #12 on: February 05, 2009, 11:24:47 AM »
My sentiments exactly, Ireland2,  How much money would it take to implement a properly designed system by utilizing modern manufacturing techniques and remove themselves from their early twentieth century thinking and distance themselves from their file and whittling  technology?    Willyjohn

Offline blx

  • Trade Count: (0)
  • Member
  • *
  • Posts: 11
Re: 2009 News?
« Reply #13 on: February 06, 2009, 04:43:06 PM »
Tim, "modernized" huntsman/sidekick?  Any details as to what exactly that means? (what they would change) 

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 2009 News?
« Reply #14 on: February 06, 2009, 04:48:16 PM »
See Modernizing the Huntsman/Sidekick in Huntsman & Sidekick forum for more info.

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline blx

  • Trade Count: (0)
  • Member
  • *
  • Posts: 11
Re: 2009 News?
« Reply #15 on: February 07, 2009, 07:13:50 AM »
Oops, thanks Tim.  I'm usually a reader, not a poster... haven't been to the site in a while...

Offline Sourdough

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 8150
  • Gender: Male
Re: 2009 News?
« Reply #16 on: February 07, 2009, 10:06:57 AM »
Guys Sorry, but I did not get to the show.  had some things come up with friends, and more showed up than expected.  We got so wrapped up i9n doing things with the grandkids we did not get to the show.   
Where is old Joe when we really need him?  Alaska Independence    Calling Illegal Immigrants "Undocumented Aliens" is like calling Drug Dealers "Unlicensed Pharmacists"
What Is A Veteran?
A 'Veteran' -- whether active duty, discharged, retired, or reserve -- is someone who, at one point in his life, wrote a blank check made payable to 'The United States of America,' for an amount of 'up to, and including his life.' That is honor, and there are way too many people in this country today who no longer understand that fact.