« previous next »
Pages: [1]   Go Down

Author Topic: E-Z Tip extractor for the Encore 209x50  (Read 1167 times)

0 Members and 1 Guest are viewing this topic.

Offline billjoe

  • Trade Count: (2)
  • Avid Poster
  • **
  • Posts: 195
E-Z Tip extractor for the Encore 209x50
« on: February 04, 2009, 02:02:33 PM »
I have a BP pistol barrel in 209x50 and haven't needed to clean it yet since I haven't shot it yet.  But as I look at the breech plug, I'm wondering how do you get the plug out when the extractor is in the way. 
It seems to me you would want to pull the breech plug every time you clean it.  Can the extractor be easily removed?

Does anyone have experience with the  E-Z Tip extractor that is supposed to make cleaning much easier?  Is it worth buying and how tough is it to install? 

Thanks for taking the time to help me out here.
bj
Logged

Offline mirage1988

  • GBO Supporter
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 1665
Re: E-Z Tip extractor for the Encore 209x50
« Reply #1 on: February 04, 2009, 02:44:24 PM »
I don't know why T/C doesn't include the ez-tip standard, but you really don't even need an extractor. You need to break the gun down to get at the screw that holds in the extractor which is simple, remove the forearm and push out the pin. I have the ez-tip on my encore rifle, but have never had a primer that didn't just fall out anyway.
Logged

Offline ohiosam

  • Trade Count: (1)
  • Member
  • *
  • Posts: 92
Re: E-Z Tip extractor for the Encore 209x50
« Reply #2 on: February 05, 2009, 10:13:51 AM »
I took the extractor out of my Encore ML barrel. I have no problems removing primers with my fingers.
Logged

Offline KAYR1

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 265
Re: E-Z Tip extractor for the Encore 209x50
« Reply #3 on: February 05, 2009, 02:47:58 PM »
I'm with you guys. I found the Encore extractor to be too much hassle. I removed it and have never had a problem. In fact, I find it more convenient without.
Logged

Offline glockman55

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 154
  • Gender: Male
Re: E-Z Tip extractor for the Encore 209x50
« Reply #4 on: February 08, 2009, 03:59:25 AM »
I replaced mine with the E-Z tip extractor and it makes it easy to remove the breach. Just swing it out of the way..I wish I could replace the Breach Plug to the newer ones that remove with a 1/4 turn.
Logged
Glock 23  http://obamaclock.org/
Sig. Ultra Compact 1911
Sig. P-232
Sig. P-238

Offline Smokepole cowboy

  • Trade Count: (0)
  • Member
  • *
  • Posts: 69
Re: E-Z Tip extractor for the Encore 209x50
« Reply #5 on: February 08, 2009, 02:07:50 PM »
I bought the E-Z tip extractor and eventually ended up just leaving it out.  No problem removing the primers with no extractor.
Logged

Offline Tn Jim

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 714
  • Gender: Male
Re: E-Z Tip extractor for the Encore 209x50
« Reply #6 on: February 08, 2009, 06:55:08 PM »
I have had extended range sessions where the breech plug got so dirty the primer wouldn't fall out. This was before I went from Pyrodex pellets to loose Triple 7. The E-Z Tip sure helped. I put it in five or six years ago and have never had a problem with it.
Logged
Not all Muslims are terrorist, but oddly enough, all terrorist are Muslims.

Offline KAYR1

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 265
Re: E-Z Tip extractor for the Encore 209x50
« Reply #7 on: February 11, 2009, 04:15:32 PM »
I can deal with the primer not falling out after extended sessions at the range, (although its never happened to me). Its just that take-down and cleaning are less of a hassle without it, and I can simply pluck out the primer with my fingernails.
Logged

Offline jammer308

  • Trade Count: (34)
  • Contributor
  • ***
  • Posts: 388
  • Gender: Male
Re: E-Z Tip extractor for the Encore 209x50
« Reply #8 on: February 11, 2009, 04:25:57 PM »
Quote from: KAYR1 on February 11, 2009, 04:15:32 PM
I can deal with the primer not falling out after extended sessions at the range, (although its never happened to me). Its just that take-down and cleaning are less of a hassle without it, and I can simply pluck out the primer with my fingernails.


Same here.
Logged
Pages: [1]   Go Up
« previous next »