« previous next »
Pages: [1]   Go Down

Author Topic: Tumble Lube Cast Bullets in .44 Magnum, Pros/Cons?  (Read 1353 times)

0 Members and 1 Guest are viewing this topic.

Offline DanChamberlain

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 104
Tumble Lube Cast Bullets in .44 Magnum, Pros/Cons?
« on: February 11, 2009, 10:44:38 AM »
Located a discontinued mold for a .430 caliber, 265 grain gas check bullet, designed for tumbling in liquid alox lube.  I've never used this method of lube before and am wondering about the pros/cons.

Dan
Logged

Offline stimpylu32

  • Moderators
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 6062
  • Gender: Male
Re: Tumble Lube Cast Bullets in .44 Magnum, Pros/Cons?
« Reply #1 on: February 11, 2009, 10:52:36 AM »
DC

I use the Lee's liquid Alox for a few diffrent style bullets and don't see a real problem with them , I even do some .22 cal ones and use the Alox to help hold the gas checks in place , kinda like super glue for bullets .

Some of these are being pushed to around 2000 FPS and no leading at all .

stimpy
Logged
Deceased June 17, 2015


:D If i can,t stop it with 6 it can,t be stopped

Offline DanChamberlain

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 104
Re: Tumble Lube Cast Bullets in .44 Magnum, Pros/Cons?
« Reply #2 on: February 11, 2009, 11:17:26 AM »
Appreciate it.

Dan
Logged

Offline jhalcott

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1869
Re: Tumble Lube Cast Bullets in .44 Magnum, Pros/Cons?
« Reply #3 on: February 11, 2009, 02:27:57 PM »
  I've tumbled some bullets with LLA that were NOT designed for it. It worked fine , the 30-06 pushed them to 2100+ fps with no leading. I had the sme results with the 7MM bullets. Good accuracy ,high velocity and little work. I t does take quite a while to dry though! I can't lube tonight and shoot them tommorrow. They do seem to pick up a lot of lint and/or dust.
Logged

Offline DanChamberlain

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 104
Re: Tumble Lube Cast Bullets in .44 Magnum, Pros/Cons?
« Reply #4 on: February 12, 2009, 02:13:47 AM »
Thanks all.

Dan
Logged

Offline twoshooter

  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 1259
  • Gender: Male
  • Remember the Starfish......
Re: Tumble Lube Cast Bullets in .44 Magnum, Pros/Cons?
« Reply #5 on: February 18, 2009, 04:33:53 PM »
Hey Dan, good to see you over here. I have shot a bunch of 44 and 357 loads with tumble lube, mostly mid to light loads with no problem. I have stored them for long periods and found them to store better upside down, where the powder stays in the case base than down on the bullet base. Over time the powder seems to soak up some of the lube. I have had several misfires in 6-8+ year old lots.
Logged
1000 years ago Men KNEW the Earth was the center of the Universe.....500 years ago Men KNEW the world was flat....... 15 minutes ago you KNEW man was alone in the universe.... Just IMAGINE what we will know tomorrow !! "K"- from Men in Black.

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18263
Re: Tumble Lube Cast Bullets in .44 Magnum, Pros/Cons?
« Reply #6 on: February 23, 2009, 02:21:28 AM »
thats the biggest reason i dont like using lla. If you do use it shoot your ammo right away and dont try storing it for long periods of time.
Quote from: twoshooter on February 18, 2009, 04:33:53 PM
Hey Dan, good to see you over here. I have shot a bunch of 44 and 357 loads with tumble lube, mostly mid to light loads with no problem. I have stored them for long periods and found them to store better upside down, where the powder stays in the case base than down on the bullet base. Over time the powder seems to soak up some of the lube. I have had several misfires in 6-8+ year old lots.
Logged
blue lives matter
Pages: [1]   Go Up
« previous next »