« previous next »
Pages: [1]   Go Down

Author Topic: 125 gn. 30-06 loads  (Read 610 times)

0 Members and 1 Guest are viewing this topic.

Offline redhawksixsh

  • Trade Count: (0)
  • Member
  • *
  • Posts: 72
125 gn. 30-06 loads
« on: February 18, 2009, 01:51:10 PM »
I have a rem. 700 adl wood and would like to load some spr. or sierra 125 gn. bullets.  Anybody have any ideas for a good powder\primer combos?  I will use for deer,hogs,and an occasional coyote. Thanks.
Logged

Offline corbanzo

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 2405
Re: 125 gn. 30-06 loads
« Reply #1 on: February 18, 2009, 03:09:47 PM »
I have been loading 130 grn btsp over H414 with CCI primers with some good success.
Logged
"At least with a gun that big, if you miss and hit the rocks in front of him it'll stone him to death..."

Offline sk330lc

  • GBO Supporter
  • Trade Count: (55)
  • Senior Member
  • *****
  • Posts: 1102
  • Gender: Male
Re: 125 gn. 30-06 loads
« Reply #2 on: February 18, 2009, 04:26:20 PM »
I shoot the Nosler 125gr Ballistic tips out of my 30-06 Prohunter Encore.  Varget and WLR primers work very well for me. Get the Book For your Bullet brand and Work up.  Hope this helps.
Logged
Be True to What You Hunt!!!!!
SUPPORT THE GBO SERVER
http://www.gboreloaded.com/forums/index.php/topic,191112.0/topicseen.html

Offline BBF

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 10042
  • Gender: Male
  • I feel much better now knowing it will get worse.
Re: 125 gn. 30-06 loads
« Reply #3 on: February 19, 2009, 07:44:05 AM »
Try some BLC-2 and Mag Primers
Logged
What is the point of Life if you can't have fun.

Offline jhalcott

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1869
Re: 125 gn. 30-06 loads
« Reply #4 on: February 19, 2009, 09:28:48 AM »
125 GR. SIE SP  Hodgdon  H414  .308"  3.150"  57.0  2952  40,300 CUP  62.5  3181  46,700 CUP       
125 GR. SIE SP  Winchester  760  .308"  3.150"  57.0  2952  40,300 CUP  62.5  3181  46,700 CUP       
125 GR. SIE SP  IMR  IMR 4007 SSC  .308"  3.150"  55.0  2881  42,500 PSI  60.0C  3136  53,000 PSI       
125 GR. SIE SP  Hodgdon  Varget  .308"  3.150"  54.0  3159  45,500 CUP  57.2  3267  49,500 CUP       
125 GR. SIE SP  IMR  IMR 4320  .308"  3.150"  54.0  3125  49,100 PSI  57.5  3307  57,900 PSI       
125 GR. SIE SP  IMR  IMR 4064  .308"  3.150"  53.0  3129  47,400 PSI  56.5  3334  58,000 PSI       
125 GR. SIE SP  Winchester  748  .308"  3.150"        51.0  3060  46,000 CUP       
125 GR. SIE SP  Hodgdon  BL-C(2)  .308"  3.150"  53.0  3117  38,000 CUP  58.7  3273  48,700 CUP       
125 GR. SIE SP  IMR  IMR 4895  .308"  3.150"  53.0  3137  47,800 PSI  57.2  3331  56,800 PSI       
125 GR. SIE SP  Hodgdon  H335  .308"  3.150"  49.0  3046  43,000 CUP  54.0  3228  49,300 CUP       
125 GR. SIE SP  Hodgdon  H4895  .308"  3.150"  48.0  2977  41,400 CUP  53.7  3229  49,300 CUP       
125 GR. SIE SP  IMR  IMR 3031  .308"  3.150"  49.0  3091  47,100 PSI  52.8  3298  58,400 PSI     
  These loads are taken from the Hogdon reloading site. They are starting and MAX loads Along with expected velocity and pressures.  ALWAYS START LOW AND WORK UP!!  
125 GR. SIE SP  Hodgdon  Benchmark  .308"  3.150"  49.0  2996  40,700 CUP  52.0  3178  48,700 CUP 

     
Logged

Offline redhawksixsh

  • Trade Count: (0)
  • Member
  • *
  • Posts: 72
Re: 125 gn. 30-06 loads
« Reply #5 on: February 20, 2009, 07:29:07 PM »
Thanks for the help guys.  As far as the Hodgdon loads, where is the primer info?
Logged
Pages: [1]   Go Up
« previous next »