Author Topic: Mortar sleds are for...  (Read 816 times)

0 Members and 3 Guests are viewing this topic.

Offline Terry C.

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1215
  • Gender: Male
  • I see what you did there...
Mortar sleds are for...
« on: February 19, 2009, 12:05:59 PM »
..LIZARDS! :D

I was getting dressed this morning when I noticed something on the GB mortar sled.

A green anole. We have these all over the yard and occasionally (as you can see) in the house. Doesn't bother me, these are good lizards. They eat all sorts of little pests.

Until the cat finds them, then they are 'cat toys.'  :o


This is a little one, only a couple of inches from snout to hips, with about a five inch tail. They can get about twice this size.

(you can click on either image for a larger version)




Here's a close-up of the little gunner...




Say what you will about reptiles, this one has good taste in artillery! ;D

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
Re: Mortar sleds are for...
« Reply #1 on: February 19, 2009, 12:17:40 PM »
Cool pix.

I understand cat toys too.
 ;D
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)

Offline dan610324

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2413
  • Gender: Male
  • bronze cannons and copper stills ;-))
    • dont have
Re: Mortar sleds are for...
« Reply #2 on: February 19, 2009, 12:37:27 PM »
not only good taste , its cute also  ;D
Dan Pettersson
a swedish cannon maniac
interested in early bronze guns

better safe than sorry

Offline Terry C.

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1215
  • Gender: Male
  • I see what you did there...
Re: Mortar sleds are for...
« Reply #3 on: February 19, 2009, 12:51:54 PM »
As long as he doesn't try to sell me insurance, he can stay...



Oh BTW, I haven't forgotten about the canister tests, but my range I cleared with the bulldozer is presently a big mudhole. If it'll just go a full week without raining, maybe it'll dry up enough to shoot

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12607
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: Mortar sleds are for...
« Reply #4 on: February 19, 2009, 01:50:28 PM »
Insurgant Anole!!!

Offline Ex 49'er

  • GBO Supporter
  • Trade Count: (8)
  • Senior Member
  • *****
  • Posts: 1975
  • Gender: Male
Re: Mortar sleds are for...
« Reply #5 on: February 20, 2009, 09:23:33 PM »
Terry C., That is one very fine looking elevator knob on yer mortar. You do great work!!!!
When you're walking on eggs; don't hop!!

Offline RocklockI

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2747
  • Gender: Male
  • Morko and Me
Re: Mortar sleds are for...
« Reply #6 on: February 21, 2009, 05:31:30 AM »
As long as he doesn't try to sell me insurance, he can stay...



Oh BTW, I haven't forgotten about the canister tests, but my range I cleared with the bulldozer is presently a big mudhole. If it'll just go a full week without raining, maybe it'll dry up enough to shoot

A big mud hole would make a cool photo of impact splatters if you could catch it .
"I've seen too much not to stay in touch , With a world full of love and luck, I got a big suspicion 'bout ammunition I never forget to duck" J.B.

Offline Terry C.

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1215
  • Gender: Male
  • I see what you did there...
Re: Mortar sleds are for...
« Reply #7 on: February 21, 2009, 08:08:28 AM »
Terry C., That is one very fine looking elevator knob on yer mortar. You do great work!!!!

The knob came off of an old cutting torch, I soldered in a threaded insert (made from a brass nut) to attach it to the screw. The threaded flange was made from an old regulator body.

A big mud hole would make a cool photo of impact splatters if you could catch it .

Well, if it was just the impact area that was a mudhole, that would be a different story. As it is I would have to slog everything in by hand because I can't drive in.

There's no rain forecast for the next few days so maybe it will firm up some.

The funny part is that there is concrete to set the cannon on, but I have to drive across a mud bog to get it there!  ::)

Offline Terry C.

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1215
  • Gender: Male
  • I see what you did there...
Re: Mortar sleds are for...
« Reply #8 on: February 23, 2009, 04:16:06 PM »
He's Baaack!

Actually it never really left, and it's laying on the axle of the field carrige right now. I'm not going to bother it tonight.

I took these photos Saturday, I just now got around to uploading them.







As you can see, it's expanded its interest from mortars to cannons.

At least it's keeping the bugs and spiders off the guns... ;D

Offline dan610324

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2413
  • Gender: Male
  • bronze cannons and copper stills ;-))
    • dont have
Re: Mortar sleds are for...
« Reply #9 on: February 24, 2009, 07:36:26 AM »
you need to feed him well that he dont leave your artillery  ;D ;D
Dan Pettersson
a swedish cannon maniac
interested in early bronze guns

better safe than sorry

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12607
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: Mortar sleds are for...
« Reply #10 on: February 24, 2009, 07:51:55 AM »
Wife want's to know it's name....she has a history pulling their tails of

Offline Terry C.

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1215
  • Gender: Male
  • I see what you did there...
Re: Mortar sleds are for...
« Reply #11 on: February 24, 2009, 10:42:50 AM »
Wife want's to know it's name

Napoleon, of course!

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12607
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: Mortar sleds are for...
« Reply #12 on: February 24, 2009, 12:26:47 PM »
After calling a me a nitwit because I asked the question, the wife then asked me to explain it...