« previous next »
Pages: [1]   Go Down

Author Topic: Pressure difference between 3 1/2" vs 3" mag  (Read 523 times)

0 Members and 1 Guest are viewing this topic.

Offline Freezer

  • Trade Count: (14)
  • A Real Regular
  • ****
  • Posts: 697
Pressure difference between 3 1/2" vs 3" mag
« on: March 03, 2009, 01:36:11 PM »
   I have a chance to pick up a Stevens SxS in 12 Guage, it's chambered for 3".  It needs a lot of work but I enjoy projects.  It's missing some springs, needs reblued and the stock refinished but for $60 it's hard to pass on.  To the point, it's an old goose gun and I was thinking since I seldom get more than two shots off in the duck blind it might be nice to carry this lighter weight gun on long trecks instead of the big semi.  Could I have the chamber extended to take 3 1/2" shells safely?  If so this could be a fun project!
Logged

Offline .45 COLT

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 319
Re: Pressure difference between 3 1/2" vs 3" mag
« Reply #1 on: March 07, 2009, 11:43:15 AM »
No. SAAMI pressure max is 11,500 PSI for 2 3/4" and 3" 12 Gauge chambers. For the 3 1/2" gun, it is 14,000 PSI. Most, maybe all, 3 1/2" loads will exceed 11,500 PSI.

I'd buy the gun anyway.

DC
Logged
On the 19th of April, 1775, a tyrannical government sent an army to disarm its citizens. They ran into a touch of trouble.

Offline Big

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 117
Re: Pressure difference between 3 1/2" vs 3" mag
« Reply #2 on: April 08, 2009, 08:39:40 PM »
You don't need 3 1/2 inch shells.  The people who sell them do.
Logged
"...the right of the people to keep and bear arms shall not be infringed."
Pages: [1]   Go Up
« previous next »