« previous next »
Pages: [1]   Go Down

Author Topic: two project guns done  (Read 903 times)

0 Members and 1 Guest are viewing this topic.

Offline cgoff

  • Trade Count: (1)
  • Member
  • *
  • Posts: 92
two project guns done
« on: March 18, 2009, 12:55:27 PM »
I refinished the stock on my SBI F10 and painted the barrel OD GREEN.  I also added a undertaker turkey choke and a truglo slip on fiber optic sight.

The second shotgun is a pardner 12 gauge that I cut the barrel down two 20" on and jb welded a cva front sight on and the peep from my BC.  I also did the stock with some textured paint and painted the barrel flat black.  It carries Great and shoots about a two inch group at 50 yds.
Logged

Offline moose

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 240
Re: two project guns done
« Reply #1 on: March 18, 2009, 02:46:15 PM »
good job, i like ;D
Logged

Offline Cookiemann

  • Trade Count: (9)
  • Senior Member
  • *****
  • Posts: 1749
  • Apple Valley, MN
Re: two project guns done
« Reply #2 on: March 18, 2009, 03:20:44 PM »
Great job on both, I like them, too.  Wondering where you found the slip-on fiber optic sight.  I have looked for one and not been able to find one locally.

cookiemann
Logged
NOT ON MY WATCH

"AIM small...MISS small"

Offline 45-70.gov

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 7009
  • Gender: Male
Re: two project guns done
« Reply #3 on: March 18, 2009, 03:22:35 PM »
how  good does  that JB  welded  sight  hold up??

i have been thinking  of adding sights to a slug gun
Logged
when drugs are outlawed only out laws will have drugs
DO WHAT EVER IT TAKES TO STOP A DEMOCRAT
OBAMACARE....the biggest tax hike in the  history of mankind
free choice and equality  can't co-exist
AFTER THE LIBYAN COVER-UP... remind any  democrat voters ''they sat and  watched them die''...they  told help to ''stand down''

many statements made here are fiction and are for entertainment purposes only and are in no way to be construed as a description of actual events.
no one is encouraged to do anything dangerous or break any laws.

Offline rickt300

  • Trade Count: (13)
  • Senior Member
  • *****
  • Posts: 2937
Re: two project guns done
« Reply #4 on: March 18, 2009, 04:30:25 PM »
I think I would solder a front sight on before I would trust JB weld.
Logged
I have been identified as Anti-Federalist, I prefer Advocate for Anarchy.

Offline Markus

  • Moderators
  • Moderator
  • Trade Count: (15)
  • Senior Member
  • *****
  • Posts: 1767
  • Gender: Male
Re: two project guns done
« Reply #5 on: March 18, 2009, 04:32:20 PM »
They look great. Now we need a range report for both please
Logged
PROUD REDNECK CONSERVATIVE

I'd much rather be remembered for being a great shot than having the most expensive gun

Offline SM Bob

  • GBO Supporter
  • Trade Count: (1)
  • A Real Regular
  • *****
  • Posts: 848
Re: two project guns done
« Reply #6 on: March 18, 2009, 05:37:00 PM »
Well done! Nice job on both guns!

                    Robert
Logged

Offline cgoff

  • Trade Count: (1)
  • Member
  • *
  • Posts: 92
Re: two project guns done
« Reply #7 on: March 18, 2009, 06:16:36 PM »
The sight on my SB1 F10 is a TrugloŽ Glo-Dot II, you can find it at bass pro, cabelas or midway

I'm not sure about solder but I can tell you unless you abuse your gun the JB weld will hold.  I had a set on my turkey gun and I had to beat them off with a hammer and punch to remove them. Just make sure you rough up both surfaces then clean them well. It does not work with a scope mounts though, I guess cause of the weight.  I shot about thirty slugs before it came loose and smacked me in the forehead.

My turkey gun shooting hevi 3" 2-#6 puts an average of 168 pellets in a 10" circle w/ at least 50 pellets in the head and neck at 40 yds.  I'm sure I can improve that with a better choke.not sure I need to though.

My pardner will put 3 brenneke classics in a two inch group at 50yds.  I haven't tried any other slugs yet.
Logged

Offline maglvr44

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 236
Re: two project guns done
« Reply #8 on: March 19, 2009, 09:02:21 PM »
Quote from: cgoff on March 18, 2009, 06:16:36 PM


My turkey gun shooting hevi 3" 2-#6 puts an average of 168 pellets in a 10" circle w/ at least 50 pellets in the head and neck.


I think that might drop a turkey ;D
Great looking guns! nice job!
Try feeding that slugger some Dixie Tuskers ;)
Logged
Pages: [1]   Go Up
« previous next »