Author Topic: 270WSM  (Read 452 times)

0 Members and 1 Guest are viewing this topic.

Offline RWK

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 266
270WSM
« on: March 28, 2009, 04:31:51 PM »
Any one have any loads for 270 wsm, 130 and 140gr. in accubond or partion. Thanks Rich

Offline OR-E-Gun Bill

  • GBO Supporter
  • Trade Count: (18)
  • A Real Regular
  • *****
  • Posts: 907
  • Gender: Male
Re: 270WSM
« Reply #1 on: March 28, 2009, 04:54:32 PM »
The Nosler website has some: http://www.nosler.com/index.php?p=15&b=270cal&s=100

RAMSHOT has load data for the .270 WSM using their Magnum Powder for the 130 & 140 gr. Nosler Partition:
http://www.ramshot.com/powders/loadguide/Ramshot_V4.2.2.pdf


Bill

Offline smith85619

  • Trade Count: (8)
  • Member
  • *
  • Posts: 69
  • Gender: Male
Re: 270WSM
« Reply #2 on: March 29, 2009, 04:29:05 PM »
I am working up a load for my 270wsm at the moment.  I am using Hybrid 100v.  whatever load I find works best for my gun may not be the best load for your gun.  I recommend you start with a manual for the bullet you want to try (Nosler), begin with the starting recommended load and load 5 rounds, then increase in .5gr increments and load 5 more rounds, continue until you get to the max recommended load or until you groups start opening up whichever comes first.  If the particular powder you tested doesn't give good results, try another powder.  ANY component you change, start over with the lowest recommended charge.

good luck, finding that special combination is very satisfying.
If at first you don't succeed, parachuting is not for you.