Author Topic: 28 Gauge Fiocchi Hull Reload Data?  (Read 2106 times)

0 Members and 1 Guest are viewing this topic.

Offline Bob_K

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 381
28 Gauge Fiocchi Hull Reload Data?
« on: September 08, 2003, 06:33:36 AM »
I have a number of Nobel Sport 28 gauge hulls so I queried Nobel about reload data.  They responded with direction to used Fiocchi hull data.  So does anyone have 28 gauge Fiocchi hull data?  (These are the standard length, low base 2 3/4" hulls, not the short 2.5" hulls that Ballistic products is selling.)
Doubled Distinguished
NAHC Life Member
VA State Shooting Association Life Member
NRA Certified Instructor in Rifle, Pistol, and Home Firearm Safety
NSSA Level I Instructor
NSSA Official Referee
NRA Endowment Member

Offline Ka6otm

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 241
28 Gauge Fiocchi Hull Reload Data?
« Reply #1 on: September 09, 2003, 03:57:35 AM »
From the Lyman Shotshell Reloading Handbook, 4th Edition (you need to get one of these if you're going to load shotsheels).

All are for 3/4 oz. of shot
Powder    Charge     Primer       Wad          Velocity    Pressure
WSF        15.5 gr.    Win 209    WAA28        1232fps    8,500 LUP
SR4756   16.5 gr.    Win 209    RemPT28     1172fps    7,700 LUP

They also list loads with Herco, 800X, N3SH and 571.

Need those?

Ka6otm

Offline Bob_K

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 381
28 Gauge Fiocchi Hull Reload Data?
« Reply #2 on: September 09, 2003, 07:34:03 AM »
Thanks.  I've got the Lyman #4, so I must have overlooked the Fiocchi loads (or assumed there were not any).
Doubled Distinguished
NAHC Life Member
VA State Shooting Association Life Member
NRA Certified Instructor in Rifle, Pistol, and Home Firearm Safety
NSSA Level I Instructor
NSSA Official Referee
NRA Endowment Member