« previous next »
Pages: [1]   Go Down

Author Topic: 444 Marlin load  (Read 676 times)

0 Members and 1 Guest are viewing this topic.

Offline gaileyr

  • Trade Count: (0)
  • Member
  • *
  • Posts: 64
444 Marlin load
« on: April 10, 2009, 12:42:06 PM »
I realize every rifle is a bit different when it comes what ammo it will favor. But here, for whatever it's worth, is a handload I discovered that my Handi likes.  It’ll put 3 shots into 1” at 50yds; hot or cold barrel doesn’t seem to make a difference. 50.8gr of H335 behind a 300gr Hornady XTP bullet.

I’m also somewhat pleased with the groups I’m getting with 55.0gr of H335 behind a Speer 270gr Gold-Dot softpoint.  It's a good load, just not ready for prime time yet. Needs a bit more tinkering.

My Handi just seems to prefer heavier bullets than the factory loaded Remington 240gr stuff, which it spits all over the paper.
Logged

Offline Halwg

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 268
Re: 444 Marlin load
« Reply #1 on: April 10, 2009, 01:06:58 PM »
I use the 265 gr Hornady over 44.0 grs of IMR-4198, and the 300 gr XTR over 40.0 gr of H-4198.  Those are shot from a Marlin 444SS.
Logged
The older I get...The better I was.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 444 Marlin load
« Reply #2 on: April 10, 2009, 01:44:13 PM »
My 444 H&R loves everything that's been shot thru it, 240gr XTP, 265gr Hornday and 355gr Beartooth handloads, plus Remington and both Hornady factory loads.  ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline gendoc

  • SWAMP GROCERIES RULE !!!
  • Trade Count: (329)
  • Senior Member
  • *****
  • Posts: 3957
  • TRUTH AND HUMOR, thatsa what i'm talk'n bout
Re: 444 Marlin load
« Reply #3 on: April 10, 2009, 03:18:54 PM »
i also have a marlin 444, and i use nosler 250gr partition-hp with 44gr imr-4198 @ 2218 FPS with chrony
a little pushy but its sweet accurate.
could not tell you the results in a handi, as you know!!!
Logged
sea-ya.....
in tha meen time, i'm wait'n for tha  7th trumpet ta sound !!!

gotta big green tractor ana diesel truck, my idea of heaven's chasin whitetail bucks and asa country boy, you know i can survive............

hey boy, hit this mason jar one time...
burn ya lil'bit did'nt it. ya ever been snipe hunt'n ?  come on...

I prefer dangerous freedom over peaceful slavery.

Offline dpe.ahoy

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 3363
  • Gender: Male
Re: 444 Marlin load
« Reply #4 on: April 10, 2009, 06:10:29 PM »
I've had good luck with IMR 3031 under the Hornady 265.  I'm gonna try some Ramshot TAC and E-Xterminator.  NEED MORE TIME!  DP
Logged
RIP Oct 27, 2017

Handi's:22Shot, 22LR, 2-22Mag, 22Hornet, 5-223, 2-357Max, 44 mag, 2-45LC, 7-30 Waters, 7mm-08, 280, 25-06, 30-30, 30-30AI, 444Marlin, 45-70, AND 2-38-55s, 158 Topper 22 Hornet/20ga. combo;  Levers-Marlins:Two 357's, 44 mag, 4-30-30s, RC-Glenfields 36G-30A & XLR, 3-35 Rem, M-375, 2-444P's, 444SS, 308 MX, 338Marlin MXLR, 38-55 CB, 45-70 GS, XS7 22-250 and 7mm08;  BLR's:7mm08, 358Win;  Rossi: 3-357mag, 44mag, 2-454 Casull; Winchesters: 7-30 Waters, 45Colt Trapper; Bolt actions, too many;  22's, way too many.  Who says it's an addiction?

Offline Halwg

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 268
Re: 444 Marlin load
« Reply #5 on: April 11, 2009, 02:59:04 AM »
What is your load of 3031 with the 265 gr Hornady?  I have some 3031 and would like to try it.
Logged
The older I get...The better I was.

Offline dpe.ahoy

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 3363
  • Gender: Male
Re: 444 Marlin load
« Reply #6 on: April 11, 2009, 03:19:58 PM »
I found one in an older Hornady book that starts at 40.8g of IMR 3031 and goes higher than I did. I stopped at 50.0g with good accuracy and it works in my Handi and my Marlin.  This printing is from 1973 and powder may have changed.  Check on the MarlinOwners site and do a search for 444 loads, they have some as well.  ALWAYS check and recheck any load data given to you by some one else.  I don't like to give out loads, but I had the manuel open and in front of me as I typed and have triple checked my typing of the charges.  Wouldn't even hurt to contact the Powder company and see what they recommend.  DP
Logged
RIP Oct 27, 2017

Handi's:22Shot, 22LR, 2-22Mag, 22Hornet, 5-223, 2-357Max, 44 mag, 2-45LC, 7-30 Waters, 7mm-08, 280, 25-06, 30-30, 30-30AI, 444Marlin, 45-70, AND 2-38-55s, 158 Topper 22 Hornet/20ga. combo;  Levers-Marlins:Two 357's, 44 mag, 4-30-30s, RC-Glenfields 36G-30A & XLR, 3-35 Rem, M-375, 2-444P's, 444SS, 308 MX, 338Marlin MXLR, 38-55 CB, 45-70 GS, XS7 22-250 and 7mm08;  BLR's:7mm08, 358Win;  Rossi: 3-357mag, 44mag, 2-454 Casull; Winchesters: 7-30 Waters, 45Colt Trapper; Bolt actions, too many;  22's, way too many.  Who says it's an addiction?
Pages: [1]   Go Up
« previous next »