Author Topic: Anyone Into 9 MM?  (Read 944 times)

0 Members and 1 Guest are viewing this topic.

Offline Bill T

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 305
  • Gender: Male
Anyone Into 9 MM?
« on: April 18, 2009, 10:39:35 AM »


Sig P-226 SCT



Glock 17, and Glock 19



Sig P-226 SCT, Glock 17, and Glock 19



Sig P-226 SCT with 4, 20 round magazines.

Being a dyed in the wool .45 ACP shooter for over 3 decades now, I've been debating on a 9MM purchase for some time. Yesterday I went shopping, and after much discussion I was no closer to making up my mind then when I walked through the door. So I bought all 3.

I've never purchased 4 guns in one day before, (I also bought another AK-47), but with the political climate changing for the worse, and interest on annuity investments paying squat, I decided there were worse things in life to spend money on than quality, high capacity, semi auto firearms.

I really like the Sig P-226. It fits in your hand like your feet fit into fleece lined slippers. The SCT model of the P-226 ships with 4, 20 round factory Sig magazines. It has the Nitron finish, and Sig Night Sights as well. Both the Glock 17 and the 19 are standard daylight fixed sights. I was going to go with a 17 and a 26, but after handling the 19 the choice was obvious. The 19 fit my hands much better. Because I bought all 3 from a shop that I frequent quite often I got a smoking deal on all 3 of them.

As soon as I returned home I promptly ordered another 4 magazines for each gun from Midway, along with 4, 33 round 9MM Glock mags. Amazingly they had all of them in stock. Now all I need is some 9MM ammo. Every gun shop, as well as Cabela's and Sportsman's Warehouse is picked clean. Not a round to be had, with no telling when there will be. We've got a big Crossroads Gun Show coming next week, so I'll get up early and get in line with the rest of the cattle and try and pick up a few thousand rounds there. I doubt there will be any bargains, but at this point I just want ammo without wearing out a set of tires to find it. Hopefully then in a few weeks I'll be able to light these babies up!  Bill T.

Offline thebear101

  • Classified -- Banned
  • Trade Count: (0)
  • Member
  • *
  • Posts: 33
Re: Anyone Into 9 MM?
« Reply #1 on: April 18, 2009, 11:14:33 AM »
Yes, my uzi does pretty good with 9mm with Soumi drum with uzi tower, shoots al day long, it shoots 22, 9mm 357 sig 400 carbon, 41EA 45acp, it just won't stop, also got a AAP Kimel, an American version of the (Tec-9mm), got 2 50 round stick mags for it, it also shoots al day long, got a Calico on hold with 50 rnd drum, that is about the size of my 9's, from the bear

Offline Empty Quiver

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2847
Re: Anyone Into 9 MM?
« Reply #2 on: April 18, 2009, 01:27:00 PM »
I like that "just born" wetness on the SIG.
**Concealed Carry...Because when seconds count help is only minutes away**

Offline Brett

  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 5148
  • Gender: Male
Re: Anyone Into 9 MM?
« Reply #3 on: April 18, 2009, 01:38:16 PM »


I've never purchased 4 guns in one day before, (I also bought another AK-47), but with the political climate changing for the worse, and interest on annuity investments paying squat, I decided there were worse things in life to spend money on than quality, high capacity, semi auto firearms.

Amen brother, amen. 
Life memberships:  <><, NRA, BASS, NAFC

Offline thebear101

  • Classified -- Banned
  • Trade Count: (0)
  • Member
  • *
  • Posts: 33
Re: Anyone Into 9 MM?
« Reply #4 on: April 18, 2009, 01:47:29 PM »
I wish I can give you pictures, but my wife don't no about it, just picture a vectory with a soumi drum 3 50 rnd clips, vector grip with flashlight attachment, I made a hole in the forend for to put in an extra clip scope see through mounts with iron sights, the basic heavy gun , I haven't got me a by pod yet but it shoots alot of pistol ammo, I'm going to see if I can have some gunsmith hook me up with a 50 barrel sleeve so I can turn a barrel notch for a c-clamp for the barrel nut and make a 50 GI cal uzi also, I cut down 4 uzi mags for towers (interchangable) on a soumi drum , All I do is change the towers, (2) nuts takes the tower off for changing, and the barrels, I steel lathed the rims down on the 40S&W shells to 9mm size so I don't have to change the bolt neither, in all but the 22 bolt, so in short, I'm using same bolt same mag, just change barrels (except 22), and I haven't had a problem yet, the 41AE is simple (40S&W) shell, rim turned to 9 shell holder once fired bras resized in 41mag die and 41 210grn bullet with Accuriant powder 6.1 min, charge fireforming, got over 1000ct, and they work well, anyways, my wife only no's about a 10th of the guns I have and got more on the way, stay cool from the bear

Offline Autorim

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 610
  • Gender: Male
Re: Anyone Into 9 MM?
« Reply #5 on: April 18, 2009, 06:00:00 PM »
My favorite Glock is the 19. The Springfield XDm9 is fast becoming my favorite 9mm. I also have the M&P9 with night sights. It is pretty easy to run through a lot of 9mm ammo.

Offline Blackhawk44

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 981
Re: Anyone Into 9 MM?
« Reply #6 on: April 18, 2009, 07:19:26 PM »
Sorry, when it comes to 9's, I'm old school, HK P7 PSP.  Bought one within a couple of months of their announcement and haven't turned loose yet.  Accurate, as compact as a Chief Special, disappears in a Jackass shoulder rig and utterly reliable.  What's not to like?

Offline Mikey

  • GBO Supporter
  • Moderators
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 8734
Re: Anyone Into 9 MM?
« Reply #7 on: April 19, 2009, 01:29:51 AM »
Bill T:  check with MidSouth Shooters Supply, one of our sponsors, and Cheaper than Dirt for ammo.  HTH.

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18278
Re: Anyone Into 9 MM?
« Reply #8 on: April 19, 2009, 01:51:21 AM »
im not a black gun fan but out of all the black guns, give me a sig anyday.
blue lives matter

Offline Bill T

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 305
  • Gender: Male
Re: Anyone Into 9 MM?
« Reply #9 on: April 19, 2009, 01:56:53 AM »
Bill T:  check with MidSouth Shooters Supply, one of our sponsors, and Cheaper than Dirt for ammo.  HTH.

I have and everything 9 MM is out of stock and on order.

http://www.midsouthshooterssupply.com/department.asp?dept=%41%4D%4D%55%4E%49%54%49%4F%4E&dept2=%43%45%4E%54%45%52%46%49%52%45%20%50%49%53%54%4F%4C&dept3=%39%4D%4D%20%4C%55%47%45%52&dept4=%45%43%4F%4E%4F%4D%59

CTD is over $20.00 a box for ball.   Bill T.

Offline Autorim

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 610
  • Gender: Male
Re: Anyone Into 9 MM?
« Reply #10 on: April 19, 2009, 05:19:50 AM »
Keep checking at Wal Mart. You can never tell when WW White box 100 pack ammo will show up. Our local gun store had a stock of WW white box 50 rds.