« previous next »
Pages: [1]   Go Down

Author Topic: Handi Rifle Problem  (Read 882 times)

0 Members and 2 Guests are viewing this topic.

Offline Harris

  • Trade Count: (0)
  • Posts: 3
Handi Rifle Problem
« on: April 19, 2009, 06:25:49 PM »
Hello friends.

I just found this forum and seems like there is a great deal of information available here on Handi rifles. I bought a Handi rifle few years ago and on the second trip to the range, the hammer got stuck. This rifle has only seen a box and a half of ammo through it. I was disappointed in the quality so I threw it in the trash and forgot about it.

Yesterday, during spring cleaning I found the rifle and thought about getting it fixed and sending it to the company for a .223 barrel for paper punching. Is it worth getting it fixed or should I just buy another rifle? Having no prior experience with their customer service, can I expect them to fix it free of charge?

Appreciate your input in advance.
Logged

Offline rickt300

  • Trade Count: (13)
  • Senior Member
  • *****
  • Posts: 2937
Re: Handi Rifle Problem
« Reply #1 on: April 19, 2009, 06:42:45 PM »
Well they can certainly fix it for you.  I think the warranty is for 2 years.  I'd say if you want to get a 223 barrel fitted then sending it in with a note would be the thing to do.
Logged
I have been identified as Anti-Federalist, I prefer Advocate for Anarchy.

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: Handi Rifle Problem
« Reply #2 on: April 19, 2009, 09:00:35 PM »
You've got a few alternatives.  You can hang in here a little while and Tim or someone will tell you how to fix it.  As mentioned, you can send it into the factory, warranty or not, and get the other barrel.  You can sell it complete or part it out here on the H&R forum classifieds, and you can buy the .223 barrel here also and save the factory turnaround time.  Meanwhile, you should read the FAQs at the top if you haven't already.  Welcome and good luck.

Pete
Logged
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline Mike Bare

  • Trade Count: (3)
  • Member
  • *
  • Posts: 91
  • Gender: Male
Re: Handi Rifle Problem
« Reply #3 on: April 20, 2009, 01:47:15 AM »
If you don't want to fool with it, you can just send it to me, and I'll take care of it for you.....what caliber is the original barrel?   ;) ;D
Logged

Offline wreckhog

  • Trade Count: (55)
  • Senior Member
  • *****
  • Posts: 2997
Re: Handi Rifle Problem
« Reply #4 on: April 20, 2009, 02:10:42 AM »
Even if it costs a couple bucks to fix it, it is better than throwing it away, whatever that means. I tend to believe that if you explain the situation, that the factory will work with you.
Logged

Offline Spanky

  • Moderators
  • Trade Count: (96)
  • Senior Member
  • *****
  • Posts: 4627
  • Gender: Male
  • USMC Semper Fidelis
Re: Handi Rifle Problem
« Reply #5 on: April 20, 2009, 05:14:21 AM »
What do you mean by the hammer being stuck??
You can't pull it back or it won't go forward when you pull the trigger?
Give us some more info.



Spanky
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Handi Rifle Problem
« Reply #6 on: April 20, 2009, 05:49:51 AM »
Handis are easy to work on once you get over the anxiety of tearing it apart, they're very simple, it's probably got a broken hammer spring or possibly striker & lifter(transfer bar), both can be replaced using the Perklo trigger hone download info in the FAQs, parts can be ordered from Brownell's, or have H&R repair it while they do a free trigger job and fit additional barrels.  ;)

Tim

http://www.hr1871.com/Support/repairs.asp

http://www.hr1871.com/Support/accessoryProgram.asp
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Harris

  • Trade Count: (0)
  • Posts: 3
Re: Handi Rifle Problem
« Reply #7 on: April 20, 2009, 08:31:32 AM »
Thank you friends for your responses.

To answer a few questions mentioned above.

The hammer does not go all the way back to engage the transfer bar. The spring seems to be fine. I am looking at it right now and when the hammer is moved back, I can see the trigger move a little but it falls short of cocking.

The original barrel is a .30-06.
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Handi Rifle Problem
« Reply #8 on: April 20, 2009, 09:08:29 AM »
As you pull the hammer back slowly you should see the transfer bar rise up behind the firing pin just as the hammer clears the transfer bar, does it do that? The transfer bar should also be against the firing pin when the hammer is back, if it flops back, it's defective or the transfer bar spring is broken or not installed properly. Any way you look at it, it's gonna have to be disassembled to repair it, download Perklo's instructions if you want to repair it yourself, or make arrangement to ship it to H&R for repair or order barrel(s).  ;)

Tim

www.perkloafm.com
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Rustyinfla

  • GBO Supporter
  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 1744
Re: Handi Rifle Problem
« Reply #9 on: April 20, 2009, 09:43:45 AM »


 Once again, it's Tim to the rescue. Sir you amaze me.
Logged
If you're gonna be stupid ya gotta be tuff

Offline Harris

  • Trade Count: (0)
  • Posts: 3
Re: Handi Rifle Problem
« Reply #10 on: April 20, 2009, 01:11:38 PM »
Now that I examine it closely, I can see the transfer bar rising just a little bit as the hammer goes back but does not come all the way up. There is a metal protrusion just under the release lever arm which seems to be kissing the transfer bar and stopping it movement upwards. 
Logged

Offline SM Bob

  • GBO Supporter
  • Trade Count: (1)
  • A Real Regular
  • *****
  • Posts: 848
Re: Handi Rifle Problem
« Reply #11 on: April 20, 2009, 02:47:05 PM »
Quote from: quickdtoo on April 20, 2009, 05:49:51 AM
Handis are easy to work on once you get over the anxiety of tearing it apart, they're very simple, it's probably got a broken hammer spring or possibly striker & lifter(transfer bar), both can be replaced using the Perklo trigger hone download info in the FAQs, parts can be ordered from Brownell's, or have H&R repair it while they do a free trigger job and fit additional barrels.  ;)

Tim

http://www.hr1871.com/Support/repairs.asp

http://www.hr1871.com/Support/accessoryProgram.asp

+1
Working on these Handis is low hanging fruit! Like Tim said download
the Perklo trigger work info from the FAQ's and you should be able
take your Handi apart, diagnose it, order whatever parts you need,
and put it back together in no time!

                           Robert
Logged

Offline Ditchdigger

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 1385
  • Gender: Male
Re: Handi Rifle Problem
« Reply #12 on: April 21, 2009, 04:17:19 PM »
A couple of yrs. ago,there was a rash of transfer bars hanging up and falling out. Lean the rifle to the left and it should cock.If you lean it to the right,the transfer bar will hang up or fall out in your hand. There was several (including a brand new one of mine) that done the same thing.They were'nt peened on the pin correctly and they would slip partly off and hang up.Some just fell out in your hand. Hope this helps.  Digger
Logged
Rest in Peace Old Friend July 2017
Pages: [1]   Go Up
« previous next »