« previous next »
Pages: [1]   Go Down

Author Topic: Polyeaurathane over alcohol stained stock?  (Read 438 times)

0 Members and 2 Guests are viewing this topic.

Offline Mad Dog

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 481
Polyeaurathane over alcohol stained stock?
« on: April 20, 2009, 01:47:46 PM »
As we speak, I'm stripping the paint off the topper 410.  I'm gonna use Fiebings leather dye to stain the stock[mahogany/dk. brown mix].  My question is, anything wrong with spraying the stock with 5-6 coats of exterior poly to water/weather proof the stock?  Will it turn milky or yellow?

Mad Dog
Logged
Mad Dog

Offline Mad Dog

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 481
Re: Polyeaurathane over alcohol stained stock?
« Reply #1 on: April 21, 2009, 01:52:05 AM »
Maybe I should ask, polyurethane, laquer or an oil like tung oil to finish the stock.  Any thoughts?

Mad Dog
Logged
Mad Dog

Offline Spanky

  • Moderators
  • Trade Count: (96)
  • Senior Member
  • *****
  • Posts: 4627
  • Gender: Male
  • USMC Semper Fidelis
Re: Polyeaurathane over alcohol stained stock?
« Reply #2 on: April 21, 2009, 02:03:28 AM »
I use boiled linseed oil for refinishing stocks.
After staining the stock and letting it dry I do 2 or 3 oil scrub coats with 0000 steel wool.
The BLO should be thinned before scrubbing.
Makes for a very nice finish and is easy to do.



Spanky
Logged

Offline spruce

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2248
  • Gender: Male
Re: Polyeaurathane over alcohol stained stock?
« Reply #3 on: April 21, 2009, 06:12:10 AM »
I've used Fiebings leather dye to do a couple of stocks and (like you) mixed colors to get just the right tint I wanted, works good, especially on "pallet wood" type stocks as it seems to penetrate well.

Finished mine with Tru-Oil and they turned out good.  I just prefer a hand rubbed oil finish, but I don't see why the polyurethane wouldn't work.
Logged

Offline NFG

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 522
Re: Polyeaurathane over alcohol stained stock?
« Reply #4 on: April 21, 2009, 06:43:17 AM »
I think I would go with what the maker of the poly says...read the instructions or go online to the poly site for the particulars...some poly products will work with some dies and not with others and some may yellow...Wood is wood...no different than furniture...but it is better to be safe than sorry.

Luck on your project.
Logged

Offline Mad Dog

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 481
Re: Polyeaurathane over alcohol stained stock?
« Reply #5 on: April 22, 2009, 01:42:41 AM »
Well,  the fiebings worked very well.  I'm on my 4th coat of poly.  Spray it on wait 2 hrs., lightly hit it with 0000 steel wool, wipe with tac cloth, then hang up for another spray coat.  So far so good.  Will let you know, when all done.

Mad Dog
Logged
Mad Dog

Offline PHATINJUN

  • "Seeker of the Red Mist"
  • GBO Supporter
  • Trade Count: (144)
  • Senior Member
  • *****
  • Posts: 4076
  • Gender: Male
Re: Polyeaurathane over alcohol stained stock?
« Reply #6 on: April 22, 2009, 06:46:01 AM »
Maddog go slow with the spray on even though it feels dry and it lets you steel wool it in between coats after 2hr I would let it sit now and then 24hrs to really harden before I get to far along. Kurt
Logged
Deceased 2/16/24
https://www.dignitymemorial.com/obituaries/machesney-park-il/kurt-heckman-11671764

Sportster17M2,20"Nickle410Tamer,26"410,
WTUTI12ga,WTU25-06,M158 22RemJet, 24"Ultra.204Ruger24"UltraFluted.204Ruger
M157Mannliker.22Hornet,24".223UltraFluted,   24".223Ultra,7X64BrenekkeUltra,22-250AIUltraFluted            7.62x39,22"303Britstub.32H&Rmag, .32303BritstubHuntsman,24" SS.50calHuntsman 58calHuntsman 12gaHuntsman
NEF RevolversSSModel73.32H&Rmag                     Blued Model73.32H&R mag The herd is shrinking!!
                                 "SOLI DEO GLORIA"

Offline Spanky

  • Moderators
  • Trade Count: (96)
  • Senior Member
  • *****
  • Posts: 4627
  • Gender: Male
  • USMC Semper Fidelis
Re: Polyeaurathane over alcohol stained stock?
« Reply #7 on: April 22, 2009, 11:48:21 AM »
Spray on poly... :-\ ???
To each his own but the extra time and effort it takes to do a nice oil finish is well worth it. ;)
Good luck with it.



Spanky
Logged
Pages: [1]   Go Up
« previous next »