New guy with handirifle questions

[a4beltfed2000]

OK new to this forum, and happy/sad with some of the news that I have read here.

I currently have a handirifle and a couple of the SB1 shotguns and a .410 tamer.

So are they going to continue making accessory barrels for the Handirifles/SB1?
I wanted to get the sb1 barreled with the 32 inch 12 GA barrel.

Is there a current listing of the barrels that are available, and after reading the post on the 45/120. I am going to have to get it! I have a browning 30 beltfed with a 9 inch barrel and I thought that was a hoot.

So can one do the handirifle (22 inch ) in 45/120?

OH I HAVE SO MANY QUESTION:D

[PHATINJUN]

Welcome aboard since you have read a few posts take a day or 2 and look at the FAQ'S and Handi help you will for sure be enlightened again welcome .Kurt

[quickdtoo]

Welcome! Check the H&R Accessory barrel list page on their website, it has all the barrel available, call em to verify they have it in stock and to confirm they can fit one to your frame, toll free (866)776-9292, as Kurt suggested, spend some time in the FAQs and Help sticky, mandatory reading for newbies. 

Tim

http://www.hr1871.com/Support/accessoryProgram.asp

[a4beltfed2000]

Thanks guys!
I have read through the FAQ and help sticky, LOTS of good info. thanks for suggesting the H&R website. I have been looking at that for quite sometime, I had read a couple of posts about them not having barrels in stock, and noted that some people were having issues with getting the barrels that they wanted, and that the price listed on some items are not valid.

thanks again guys! So has anyone done the 45/120 in the 22 inch barrel or better yet cut one down to 16.5 inch? I dont mind some recoil
   

[dpe.ahoy]

Careful, don't want the bullet nose stickin out past the end of the barrel!    And welcome.  DP

[a4beltfed2000]

Hey just consider it to be a handirifle derringer