Author Topic: Finished Putting my T/C Contender Carbine in 375JDJ Together... :)  (Read 1670 times)

0 Members and 1 Guest are viewing this topic.

Offline Camp Cook

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 683
I have a new favorite rifle...  ;D

I just finished putting my 21" factory tapered barrel T/C Contender carbine rechambered to 375JDJ together...

I'm getting 2300fps average velocity with 260gr Nosler Accubonds.

Butt stock from Gun Stocks Inc

Fore end from Boyd Stocks

MGM scope base

Leupold quick detachable scope rings

Leupold Vari-X 111 2.5-8X36mm B&C reticule scope

Kick-Eez magnum recoil pad

I'm going after my spring grizzly with this rifle/cartridge/load combo this year.  8)



<")))><

"A gun is a tool, Marian. No better, no worse than any other tool. An axe, a shovel, or anything. A gun is as good or as bad as the man using it. Remember that" -movie "Shane" 1953

Offline Encore28

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 332
Re: Finished Putting my T/C Contender Carbine in 375JDJ Together... :)
« Reply #1 on: April 27, 2009, 10:50:28 AM »
Nice set-up

Good Luck with the grizzly

Encore28
T/C---One Perfect Shot

TCA Member

Offline Capt Gary

  • Trade Count: (5)
  • Avid Poster
  • **
  • Posts: 163
Re: Finished Putting my T/C Contender Carbine in 375JDJ Together... :)
« Reply #2 on: April 27, 2009, 12:49:31 PM »
Very nice!!

Offline GameHauler

  • Trade Count: (49)
  • A Real Regular
  • ****
  • Posts: 867
  • Gender: Male
  • Thank you Every One for Positive Feedback
Re: Finished Putting my T/C Contender Carbine in 375JDJ Together... :)
« Reply #3 on: April 27, 2009, 12:55:58 PM »
VERY nice ;)
I just finished my pack gun also
I will post some pics of it also.

One question.
I was thinking about adding a sling to mine
and keep looking at the trigger guard and grip
thinking how they would dig into your back.
How is it on the back?
Mike

Offline Camp Cook

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 683
Re: Finished Putting my T/C Contender Carbine in 375JDJ Together... :)
« Reply #4 on: April 27, 2009, 06:16:28 PM »
The rifle sits slightly side ways across my back so it normally does not dig in, it does now and then but I don't usually carry it slung across my back but have it slung on my shoulder.
<")))><

"A gun is a tool, Marian. No better, no worse than any other tool. An axe, a shovel, or anything. A gun is as good or as bad as the man using it. Remember that" -movie "Shane" 1953

Offline Silvertp

  • GBO Supporter
  • Trade Count: (10)
  • A Real Regular
  • *****
  • Posts: 687
Re: Finished Putting my T/C Contender Carbine in 375JDJ Together... :)
« Reply #5 on: April 28, 2009, 04:12:18 AM »
Look out Grizz...here comes camp cook! 

Enjoy your grizz hunt...that rifle combo sounds plenty potent to lay'em down.  Let us know how you do.

Silvertp

Offline Camp Cook

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 683
Re: Finished Putting my T/C Contender Carbine in 375JDJ Together... :)
« Reply #6 on: May 06, 2009, 08:36:18 PM »
I finally got out to the range to sight the scope in I was planning on sighting in a bit high @ 100 yards with the main reticule and that the first line down on the B&C reticule dead on @ 200 yards and the second line down dead on @ 300 yards with the 260gr Accubond's @ 2300fps.

Results... sighted in about 1" high at 100 yards the 200 yard target ended up with the first line down grouping 1" high and here is my final target @ 300 yards the bottom hole #1 I held 1/2 way between lines as per the diaghram and shot #2 is holding dead on @ 300 yards with the second B&C line down.

I have to say that I am constantly amazed at how accurate these little rifles are and I love it when a plan comes together.

Only 3 weeks and I will be grizzly hunting...  ;)



A fellow was commenting to me about aren't you nervous about hunting a grizzly with a single shot how would I ever get off a second shot quickly so just before I left the gun club yesterday I set up my video camera and filmed a video on how I shoot and reload Contenders quickly.

My second shot I kind of messed up you can seeing me laughing at myself...  ;D

http://www.youtube.com/watch?v=Pn--xHLUsho

<")))><

"A gun is a tool, Marian. No better, no worse than any other tool. An axe, a shovel, or anything. A gun is as good or as bad as the man using it. Remember that" -movie "Shane" 1953

Offline Camp Cook

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 683
Re: Finished Putting my T/C Contender Carbine in 375JDJ Together... :)
« Reply #7 on: June 04, 2009, 07:28:50 AM »
Whoo Hoo I broke the 375JDJ in while I was on my grizzly hunt unfortunately I didn't get a chance on a grizzly but I did the next best thing, I spotted a 6' 2" fat as fat can be beautiful thick black haired black bear and was able to get within 100 yards of him.

I waited until he was standing broad side too me one shot with a 260gr Accubond @ 2300fps muzzle velocity dropped him instantly, after about 15 seconds he started to move a bit so I put another one into him which stopped him completely. 

To say that I am happy with this rifle/cartridge combo is an total understatement.

Sorry no pictures I unfortunately forgot my camera at home for the trip...   :-[

<")))><

"A gun is a tool, Marian. No better, no worse than any other tool. An axe, a shovel, or anything. A gun is as good or as bad as the man using it. Remember that" -movie "Shane" 1953

Offline securitysix

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 558
Re: Finished Putting my T/C Contender Carbine in 375JDJ Together... :)
« Reply #8 on: June 04, 2009, 02:29:49 PM »
A fellow was commenting to me about aren't you nervous about hunting a grizzly with a single shot how would I ever get off a second shot quickly so just before I left the gun club yesterday I set up my video camera and filmed a video on how I shoot and reload Contenders quickly.

"Why no, I'm not nervous at all.  Quick second shot?  Why would I need a second shot?  I just make the first one count and call it good."  :P

Congrats on your black bear.  Better luck on a grizzly next time. 

Offline Silvertp

  • GBO Supporter
  • Trade Count: (10)
  • A Real Regular
  • *****
  • Posts: 687
Re: Finished Putting my T/C Contender Carbine in 375JDJ Together... :)
« Reply #9 on: June 04, 2009, 06:15:16 PM »
Camp Cook

Way to go on the Black Bear!    A Grizz would have gone down just as hard with that set-up and you behind the trigger.

Thanks for the update on your hunt.

Silvertp

Offline Ladobe

  • Trade Count: (91)
  • Senior Member
  • *****
  • Posts: 3193
Re: Finished Putting my T/C Contender Carbine in 375JDJ Together... :)
« Reply #10 on: June 05, 2009, 04:52:19 AM »
A fellow was commenting to me about aren't you nervous about hunting a grizzly with a single shot how would I ever get off a second shot quickly so just before I left the gun club yesterday I set up my video camera and filmed a video on how I shoot and reload Contenders quickly.

"Why no, I'm not nervous at all.  Quick second shot?  Why would I need a second shot?  I just make the first one count and call it good."  :P

Congrats on your black bear.  Better luck on a grizzly next time. 

Yep, folks who have never owned AND hunted with a 375JDJ just don't have a clue what it is capable of with a well placed shot.   One is usually more than enough for just about anything.

Ditto, nice score on the blackie Camp Cook.
Evolution at work. Over two million years ago the genus Homo had small cranial capacity and thick skin to protect them from their environment. One species has evolved into obese cranial fatheads with thin skin in comparison that whines about anything and everything as their shield against their environment. Meus

Offline charles p

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2374
  • Gender: Male
Re: Finished Putting my T/C Contender Carbine in 375JDJ Together... :)
« Reply #11 on: June 05, 2009, 10:26:35 AM »
Put a bayonet on the end of the barrel of that single shot.

Offline olesj

  • Trade Count: (0)
  • Posts: 4
Re: Finished Putting my T/C Contender Carbine in 375JDJ Together... :)
« Reply #12 on: June 24, 2009, 02:52:20 AM »
Camp Cook, That's a nice rig you have there!

I'm still working on something similar.

A stainless g2 in .378 GNR.  It's a 22" tube with muzzle break.  Looking at getting a Brockmans pop up peep sight scope mount on it and a burris 2-7 timber line scope.

I'm excited about getting things all put together.  I originally started the project as a high country elk rifle; but since tood a job in MI :'( so it will have to draw first blood on whitetails this fall.

Jason

Offline Camp Cook

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 683
Re: Finished Putting my T/C Contender Carbine in 375JDJ Together... :)
« Reply #13 on: July 02, 2009, 07:15:45 AM »
Thanks for posting about the 378GNR, I've been thinking about getting a 375 cal round that is in between the performance of my 375JDJ 260gr bullets = 2300fps and my Rem 700 LSS in 375 Rem Ultra Mag 300gr bullets = 2775fps.

A 28" barreled Encore should be the perfect platform.

Can the 378GNR be used on a Contender frame?

Anyone know about the 375GNR that is based on the 45-70 case they are far more readily available to me than a 405 Win case.
<")))><

"A gun is a tool, Marian. No better, no worse than any other tool. An axe, a shovel, or anything. A gun is as good or as bad as the man using it. Remember that" -movie "Shane" 1953

Offline southarkrob

  • Trade Count: (37)
  • Avid Poster
  • **
  • Posts: 199
Re: Finished Putting my T/C Contender Carbine in 375JDJ Together... :)
« Reply #14 on: July 13, 2009, 08:25:33 AM »
I used a 375 JDJ last season on a big South Arkansas Whitetail Doe (125 lbs)....I have shot deer with just about every cartridge imaginable... the 375 JDJ is incredible... I was in a tree stand and had to lean around the tree to get a shot at her quartering away...hit her perfectly beind the shoulder and came out the point on her chest....she kinda buckled and ran...watched her go end over end about 30 yards later.... I got down and walked to where I shot her....ghastly!!!! blood and lung tissue was actually blown 30 feet away.... a blodd trail a blind man could have followed.... I was hoping for a big hog later but that never materialized. The 375 JDJ is an incredible cartridge...I was using the Hornady 220 or 225 grain flat point. Congrats on the black bear...Robbie