Author Topic: ? about 10 ga. accessory barrels  (Read 654 times)

0 Members and 1 Guest are viewing this topic.

Offline Gemsbok

  • Trade Count: (42)
  • Contributor
  • ***
  • Posts: 331
? about 10 ga. accessory barrels
« on: May 08, 2009, 08:35:48 AM »
Does anyone know why H&R will not fit 10 ga. barrels to SB2 or SB1 frames, only to "10 ga. frames", as stated in their acc. barrel brochure?

Offline snakeman

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 191
  • Gender: Male
Re: ? about 10 ga. accessory barrels
« Reply #1 on: May 08, 2009, 01:18:47 PM »
Not sure on that one. My guess would be that there is something a little different with the frames. Maybe the hinge pin size or something.


snakeman

Offline moxgrove

  • GBO Supporter
  • Trade Count: (3)
  • Contributor
  • *****
  • Posts: 469
  • Gender: Male
Re: ? about 10 ga. accessory barrels
« Reply #2 on: May 08, 2009, 05:50:08 PM »
Won't fit. The barrels are too big in diameter. That's why the heavy 12 ga ush is on the 10 ga frame

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: ? about 10 ga. accessory barrels
« Reply #3 on: May 09, 2009, 04:25:54 AM »
To be specific, the barrel swell on regular shotgun barrels, and all other barrels for that matter, is 1.1" in diameter, the 10ga based barrels are 1.2" in diameter, so the frame opening of the SB2 10ga frame is bigger.

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline a4beltfed2000

  • Trade Count: (16)
  • A Real Regular
  • ****
  • Posts: 593
Re: ? about 10 ga. accessory barrels
« Reply #4 on: May 09, 2009, 05:05:06 AM »
so are the 20 ga and 12 ga slug guns built on the 10ga frame? I saw a 20 ga slug gun at gander for 229.00 that hand a very heavy slug barrel on it.
H&R/NEF 10, 12,16 20 28 ,410 .243 45 357 45lc. 1919a4, uzi, sten mK 2,3,5 M2HB, 1917a1, ak74(2) amd 65, RPK (2) 11 aks and 50 other guns....

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: ? about 10 ga. accessory barrels
« Reply #5 on: May 09, 2009, 05:16:02 AM »
No, just the 12ga slug guns, the 20ga uses an SB1 frame.

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline a4beltfed2000

  • Trade Count: (16)
  • A Real Regular
  • ****
  • Posts: 593
Re: ? about 10 ga. accessory barrels
« Reply #6 on: May 09, 2009, 08:59:42 AM »
So to be clear, the 12 slug gun with the massive barrel is a 10 ga frame or could be rebarreled to a 10 ga frame.
H&R/NEF 10, 12,16 20 28 ,410 .243 45 357 45lc. 1919a4, uzi, sten mK 2,3,5 M2HB, 1917a1, ak74(2) amd 65, RPK (2) 11 aks and 50 other guns....

Offline moxgrove

  • GBO Supporter
  • Trade Count: (3)
  • Contributor
  • *****
  • Posts: 469
  • Gender: Male
Re: ? about 10 ga. accessory barrels
« Reply #7 on: May 09, 2009, 12:30:33 PM »
yes, the 12 ga USH frame will accept 10 gauge barrels only.

Offline buffalo12888

  • Trade Count: (9)
  • Member
  • *
  • Posts: 98
Re: ? about 10 ga. accessory barrels
« Reply #8 on: May 11, 2009, 02:12:03 AM »
I had bought a 12 guage new with the standard frame and sent it off for a 12 guage slug hunter and NEF had no problems sawpping barrels.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: ? about 10 ga. accessory barrels
« Reply #9 on: May 11, 2009, 04:46:01 AM »
There are two other rifled 12ga barrels that can be fitted to SB1 frames, the Tracker II and the ULSH which isn't on the accessory barrel list yet. As stated on the accessory barrel list, the #377 (12ga USH barrel) can only be fitted to 10ga frames.

Tim

http://www.hr1871.com/Firearms/Shotguns/tracker2.asp

http://www.hr1871.com/Firearms/Shotguns/ultraSlug.asp

http://www.hr1871.com/Support/accessoryProgram.asp
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Gemsbok

  • Trade Count: (42)
  • Contributor
  • ***
  • Posts: 331
Re: ? about 10 ga. accessory barrels
« Reply #10 on: May 13, 2009, 08:05:20 AM »
Thanks for the help folks.