Author Topic: 500 s&w handi  (Read 527 times)

0 Members and 5 Guests are viewing this topic.

Offline wayne24

  • GBO Supporter
  • Trade Count: (1)
  • Avid Poster
  • *****
  • Posts: 100
  • Gender: Male
500 s&w handi
« on: June 11, 2009, 08:24:59 PM »
I just purchased a 500 s&w handi .The rear site is missing (its the fiber optic one) where do I find a new one.I am going to be reloading for it which bullets and powder is working best for you guys with one of these beasts.What does the recoil compare to ? Is it worse than a 12 gage slug gun?I have not picked it up yet should have it sometime next week.
Thanks,
Wayne

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43302
  • Gender: Male
Re: 500 s&w handi
« Reply #1 on: June 11, 2009, 08:37:56 PM »
The rear sight can be ordered from H&R, be sure to order the mounting screws too, or you can just order a WGRS peep from them for $18.55. Use the search, you'll find lots of info on loads, there's also a couple links in the FAQs on it with data. You can expect recoil to be healthy with hunting loads, so much so that many don't keep them, so be prepared to load it light if you don't like recoil.  ;)

Tim

http://www.gboreloaded.com/forums/index.php?action=search
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline wreckhog

  • Trade Count: (55)
  • Senior Member
  • *****
  • Posts: 2997
Re: 500 s&w handi
« Reply #2 on: June 12, 2009, 03:35:29 AM »
Look up handi rifle .500 on youtube for visual on recoil

Offline wayne24

  • GBO Supporter
  • Trade Count: (1)
  • Avid Poster
  • *****
  • Posts: 100
  • Gender: Male
Re: 500 s&w handi
« Reply #3 on: June 12, 2009, 07:30:02 PM »
The rear sight can be ordered from H&R, be sure to order the mounting screws too, or you can just order a WGRS peep from them for $18.55. Use the search, you'll find lots of info on loads, there's also a couple links in the FAQs on it with data. You can expect recoil to be healthy with hunting loads, so much so that many don't keep them, so be prepared to load it light if you don't like recoil.  ;)

Tim

http://www.gboreloaded.com/forums/index.php?action=search
Tim,
Is the WGRS peep sight the one that mounts where the scope rail mounts?Will that sight work with the fiber front site?Thank you for your help!!!!!!!!!!!!!
Wayne

Offline wayne24

  • GBO Supporter
  • Trade Count: (1)
  • Avid Poster
  • *****
  • Posts: 100
  • Gender: Male
Re: 500 s&w handi
« Reply #4 on: June 12, 2009, 07:34:22 PM »
Look up handi rifle .500 on youtube for visual on recoil
Checked it out I can not wait to shoot it!!!!!!!!!!!!!!!!Showed them to my wife and daughter and thay said NO THANKS.Guess I will have to wait for my son to come home on  leave in July I know I can get him to shoot with me.
Wayne

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43302
  • Gender: Male
Re: 500 s&w handi
« Reply #5 on: June 12, 2009, 07:51:44 PM »
Yes, the WGRS mounts in the two rear scope base mounting holes, dunno if it will work with the factory sight, mine is scoped, try it and see, if it's not the right height, you can always add a ramp and Firesight as shown in the FAQs Peep and Firesights thread, I use it on a 45-70 and 44mag.

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline dk17hmr

  • Trade Count: (22)
  • Contributor
  • ***
  • Posts: 337
  • Gender: Male
Re: 500 s&w handi
« Reply #6 on: June 13, 2009, 08:04:12 AM »
I have one with a peep sight, I wouldnt have it set up any other way.  Its very accurate with cast bullets and Lil'Gun powder.
Yea it recoils but what would you expect.

http://www.gboreloaded.com/forums/index.php/topic,166201.0.html

http://www.gboreloaded.com/forums/index.php/topic,167209.0.html

Doug
.................................................. ........................................
Sticks and stones may break my bones but hollow points expand on impact.

ΜOΛΩΝ ΛΑΒΕ