« previous next »
Pages: [1]   Go Down

Author Topic: My dream Contender setup  (Read 926 times)

0 Members and 1 Guest are viewing this topic.

Offline Joel W.

  • Trade Count: (0)
  • Member
  • *
  • Posts: 34
My dream Contender setup
« on: September 22, 2003, 03:35:31 AM »
Consider this post the meanderings of a wistful dreamer.  I have projects going in too many directions right now to start this one, however, I already know what I want in my contender setup.  
I might be compelled to use the G-2 frame, haven't been able to look it over closely enough to say one way or the other.  The barrels though, I pretty much have worked out.
1. 12" .221 Fireball
2. 12" .357 Maximum
3. 12" .41 Magnum
4. 12" 6mm TCU
5. 12" .7-30 Waters
6. 12" .35 Remington

Notice a pattern?  I have owned a couple contenders and one Encore and I have about come to the conclusion that 12" (For Me) is the perfect barrel length.

I could pare this list down to just two calibers, the fireball and the Waters, and be perfectly happy, the rest would just be icing on the cake, and I included them because I was wishing anyway.

So anyway, whay about you guys, I am sure some of you already have your setups in hand, tell me about them, and I would also like to hear any hunting stories you may have.
Logged
When it comes time to shoot, SHOOT.  Don't talk.

Offline KYODE

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1050
  • Gender: Male
My dream Contender setup
« Reply #1 on: September 22, 2003, 05:20:38 AM »
that would be a super setup! i don't know if i'll ever be totally satisfied. every time i get one, i want another. i'm like you right now, on hold till money starts flowing my way. here's my acquired list so far: :shock:
                                1. 14" 22lr match contender
                                2. 14" .223 contender
                                3. 14" 6tcu contender
                                4. 14" 30-30 ackley improved contender
                                5. 4- blue contender actions, one being a G2

                                1. 13" 6br encore
                                2. 15" 7-08 encore
                                3. 2- blue encore actions
                                               

even though, i probably have my practical dream list already, i find myself wanting more. want list(right now-changes daily :roll: ): 6x47 contender, .243 encore, and 444 marlin encore. :grin:
Logged

Offline Joel W.

  • Trade Count: (0)
  • Member
  • *
  • Posts: 34
My dream Contender setup
« Reply #2 on: September 22, 2003, 05:49:11 AM »
On a side note, one of the other things I would like to see sitting in one of the corners of my gunroom would be a 6mmTCU built on one of the Mini Mark X actions.  Should be easy enough, just take one with the 223 bolt face and rebarrel.
Logged
When it comes time to shoot, SHOOT.  Don't talk.

Offline nfmMike

  • Trade Count: (0)
  • Member
  • *
  • Posts: 68
  • Gender: Male
  • NC better be America, S. Florida sure wasn't!
    • Semper Fidelis
My dream Contender setup
« Reply #3 on: September 22, 2003, 06:17:07 AM »
I would be very happy with a stainless, 15" 7mm-08 with wood furniture.
Logged
Semper Fi!
Mike

Offline doc-and

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 438
My dream Contender setup
« Reply #4 on: September 23, 2003, 05:13:38 PM »
My dream set up consist of

22LR in 10", 14", 16" & 21" with Match Chambers
223 in 14" & 16"
7mmTCU in 10"
7-30 Waters in 14"
9mm in 10"
30Carbine in 10"
30-30 in 14"
357Mag in 10" & 14"
44Mag in 10", 14" & 16"
45ACP in 10"
45 Colt in 10"
45-70 in 16"
Along with 3 frames. Need to add a G2

My Encore is a little sparser

7-08 in 15"
223 in 24"
6mm Remington in 24" Bull
Currently have one Frame and 2more on order

So many barrels and so little time and money!!!
Logged

Offline norm

  • Trade Count: (0)
  • Member
  • *
  • Posts: 54
My dream Contender setup
« Reply #5 on: September 23, 2003, 06:37:45 PM »
O.K. you might think Im crazy but here is mine.
An original Flatside frame. With a 16"extreme taper octagon barrel. Caliber would be .17 Mach IV or .221 Fireball. (cant decide)
Stocked by Bullberry or Virgin Valley in their style of carbine stocks. Nice walnut but nothing to flashy, satin finish.
And top it off with a Lyman Alaskan scope.All the metal would be bead blasted blue. Kind of a retro carbine. :shock:
Logged

Offline doc-and

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 438
My dream Contender setup
« Reply #6 on: September 25, 2003, 09:49:25 AM »
Hi Norm :D ,

I'd probably choose the 221 Fireball cartridge.  I own an XP-100 in it and find it a tack driver :-D .  If I ever shoot-out the barrel I'll will rebarrel in 221 again except for a 14incher.

Just my 2cents

doc-and
Logged

Offline JJFly

  • Trade Count: (0)
  • Member
  • *
  • Posts: 66
Glad there are custom barrel makers for my dreams!
« Reply #7 on: September 26, 2003, 07:49:27 PM »
My list starts out like this:

17Squirrel (1/2 size Hornet case) 22" SS Bull Contender
257JDJ (257/225Imp) 24" Matte Blue Bull Fluted Contender
7mm TCU 21" Hi Gloss Blue Bull Contender
7mm Mag 26" Matte Blue Bull Encore
338-06 24" Matte Blue Heavy Taper Encore
35Rem 12" SS Bull Contender
405Win 16" Gloss Blue Bull Contender
454Casull 10" Gloss Blue Bull Encore
458Win Mag 16" SS Bull Encore

There are others still waiting my attention, I suppose much like any other disease I will find homes for the homeless barrels... I just can't help myself.  Especially now that my wife allowed this new BIGGER safe in the house with 2X the room of the last one.  OH THE POSSIBILITIES! :-D
Logged
Pages: [1]   Go Up
« previous next »