« previous next »
Pages: [1]   Go Down

Author Topic: 9.3x74R Handi Rifle  (Read 1129 times)

0 Members and 2 Guests are viewing this topic.

Offline Reverend Recoil

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 253
  • Gender: Male
9.3x74R Handi Rifle
« on: June 30, 2009, 04:52:58 AM »
Does anyone make 9.3x74R barrels for the H&R Handi Rifle?
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 9.3x74R Handi Rifle
« Reply #1 on: June 30, 2009, 05:02:46 AM »
Any good gunsmith can, just depends on how deep your pockets are, a stub will cost $300+ the cost of donor stub(see FAQs) and blank, or an existing barrel can be rebored and rechambered for about the same money, use the search for custom barrel.  ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Tallwalker

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 233
Re: 9.3x74R Handi Rifle
« Reply #2 on: June 30, 2009, 09:26:54 AM »
I like Handi rifles, but you can probably buy a Ruger No. 1 factory chambered for that round for what it would cost you to build a handi. They are nice handling rifles, and the one I shot was pretty accurate.
Logged

Offline eskimo36

  • Trade Count: (156)
  • Senior Member
  • *****
  • Posts: 1359
  • Gender: Male
    • Adventure Rider
Re: 9.3x74R Handi Rifle
« Reply #3 on: July 01, 2009, 01:20:22 AM »
I would be interested in a Ruger 1 in 9.3x74r for the price of a building a 9.3x74r handi.   I dont see any below $900 to my door. I have a 38x74r in the works right now.
Logged
"one shot is usually enough"

Offline Tallwalker

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 233
Re: 9.3x74R Handi Rifle
« Reply #4 on: July 01, 2009, 07:15:03 AM »
You might be right about that, I guess the one I was thinking of was a used one that I saw for around $600. New ones do go for $850, or so around here discounted at the larger gun stores.
Logged

Offline fish280

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 314
Re: 9.3x74R Handi Rifle
« Reply #5 on: July 01, 2009, 04:06:50 PM »
look up .35 whelen and 9.3x74r case drawings. i'm thinking a handi whelen barrel - or .30-'06 barrel - could be re-chambered/rebored for that dandy rimmed euro round. that'd be lots cheaper than stubbing ...
Logged
His,
><>

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 9.3x74R Handi Rifle
« Reply #6 on: July 01, 2009, 04:33:44 PM »
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline fish280

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 314
Re: 9.3x74R Handi Rifle
« Reply #7 on: July 02, 2009, 11:33:20 AM »
and simpler.
Logged
His,
><>

Offline moxgrove

  • GBO Supporter
  • Trade Count: (3)
  • Contributor
  • *****
  • Posts: 469
  • Gender: Male
Re: 9.3x74R Handi Rifle
« Reply #8 on: July 02, 2009, 12:19:58 PM »
Wayne doesn't do .366 rebores though
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 9.3x74R Handi Rifle
« Reply #9 on: July 02, 2009, 12:22:07 PM »
If he did, I'da had one long ago, it was discussed when I had my 405 Win made.  :-\

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Drilling Man

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3635
Re: 9.3x74R Handi Rifle
« Reply #10 on: July 02, 2009, 04:57:32 PM »
  This guy had done a bunch of EXCELENT rebore work for me!  http://www.redmansrifling.com/

  DM
Logged

Offline rockrat

  • Trade Count: (25)
  • Avid Poster
  • **
  • Posts: 192
Re: 9.3x74R Handi Rifle
« Reply #11 on: July 03, 2009, 03:56:14 AM »
You could find a 38-55 barrel and have it rechambered to 38-72Win or if you want to go whole hog, then someone somewhere was talking about a 38-90Win and that the eruopeans made their 9.3 x 74R from that case.   The 9.3 x 74R opened to take the .375" bullet would be right up there with the 375 H&H, I would think, but might be more than the Handi could stand for long.  In the 38-72Win, you can take a 280gr bullet to 2400fps, in the Handi ;D
Logged
Its not that Life is too short, its that Death is too long!!

Offline fish280

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 314
Re: 9.3x74R Handi Rifle
« Reply #12 on: July 03, 2009, 04:19:52 AM »
isn't there a rimmed version of the h&h for double guns? boy, it'd be easier to find a variety of bullets, too, in .375.
Logged
His,
><>

Offline PeterCartwright

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 289
Re: 9.3x74R Handi Rifle
« Reply #13 on: July 03, 2009, 05:26:29 AM »
Neat working cartridge for sure.  A friend of mine (whose "allowance" is several decimals larger than mine) had a beautiful side by side 9.3X74R on a show table several months ago.  I think it was a Merkle (sp?).  I also ran across a really nice Husqvarna '98 chambered for 9.3X57 several years ago. Another neat cartridge.  I pondered the 9.3X62 when I was daydreaming about what to do with a mix and match VZ24, but ultimately turned it over to a smith friend who had a new .35 Whelen barrel.  (Still haven't gotten that project back from the shop).

PC
Logged

Offline a4beltfed2000

  • Trade Count: (16)
  • A Real Regular
  • ****
  • Posts: 593
Re: 9.3x74R Handi Rifle
« Reply #14 on: July 03, 2009, 05:42:56 AM »
Tim,


   Do I understand that you have a handirifle in 405? NOW I AM JEALOUS! You must give me details? was this a rebored barrel and what did you use? what was the cost? and of course pictures ;D
Logged
H&R/NEF 10, 12,16 20 28 ,410 .243 45 357 45lc. 1919a4, uzi, sten mK 2,3,5 M2HB, 1917a1, ak74(2) amd 65, RPK (2) 11 aks and 50 other guns....

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 9.3x74R Handi Rifle
« Reply #15 on: July 03, 2009, 05:55:29 AM »
Here's where it started, it shoots the Hornady 300gr SP just shy of 2500fps.

Tim

  http://www.gboreloaded.com/forums/index.php/topic,65816.msg399491.html#msg399491



Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain
Pages: [1]   Go Up
« previous next »