« previous next »
Pages: [1]   Go Down

Author Topic: .432 sizer  (Read 1054 times)

0 Members and 4 Guests are viewing this topic.

Offline matthewquigley

  • Trade Count: (2)
  • Member
  • *
  • Posts: 85
  • Gender: Male
.432 sizer
« on: July 19, 2009, 02:19:16 PM »
 >:( >:( >:( >:( >:( >:( >:(  where do i get one??????????????????????  nobody lists it
Logged
M. Quigley
            900 yards
                          O O
                         O     
                           O
H&R 223,25-06,308, 44,357    700VTR 308,  Ruger 77/44, Savage ML10

Offline Reed1911

  • GBO Sponsor
  • Trade Count: (18)
  • Senior Member
  • *****
  • Posts: 1332
    • www.reedsammo.com
Re: .432 sizer
« Reply #1 on: July 20, 2009, 04:10:55 AM »
Depends on what type/brand of sizer you want. Lee makes them, RCBS will make them, Lyman will make them, Bunch of other custom houses too...
Logged
Ron Reed
Reed's Ammunition & Research
info@reedsammo.com
www.reedsammo.com

Offline Nobade

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 1927
Re: .432 sizer
« Reply #2 on: July 20, 2009, 02:23:51 PM »
Or you buy the closest one you can find and hone it out with sandpaper on a split dowel.
Logged
"Give me a lever long enough, and a place to stand, and I'll break the lever."

Offline matthewquigley

  • Trade Count: (2)
  • Member
  • *
  • Posts: 85
  • Gender: Male
Re: .432 sizer
« Reply #3 on: July 21, 2009, 02:35:17 PM »
hmmmm   like a split metal dowel with wet/dry 220   like i do cyl heads?????????
Logged
M. Quigley
            900 yards
                          O O
                         O     
                           O
H&R 223,25-06,308, 44,357    700VTR 308,  Ruger 77/44, Savage ML10

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26905
  • Gender: Male
Re: .432 sizer
« Reply #4 on: July 21, 2009, 05:47:46 PM »
I'm not looking at their catalog right now but I'm pretty sure Midsouth Shooter's Supply a GBO Sponsor carries them. They are listed separately as alternate sizes available. They have alternate sized ones by both Lyman and RCBS and I'm pretty sure tho not absolutely positive that .432" is one they offer.
Logged


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline matthewquigley

  • Trade Count: (2)
  • Member
  • *
  • Posts: 85
  • Gender: Male
Re: .432 sizer
« Reply #5 on: July 21, 2009, 10:28:46 PM »
 :( :( :( :( :( :(.431 is all they list too   called lyman    they say no too
Logged
M. Quigley
            900 yards
                          O O
                         O     
                           O
H&R 223,25-06,308, 44,357    700VTR 308,  Ruger 77/44, Savage ML10

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18169
Re: .432 sizer
« Reply #6 on: July 23, 2009, 12:32:28 AM »
have a machinist hone the die out to what you want.
Logged
blue lives matter

Offline gypsyman

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 4832
Re: .432 sizer
« Reply #7 on: July 28, 2009, 02:23:35 AM »
Never had that done. Just out of couriosity, would you need to have a new ''plug'', made for the sizer?(not sure what that part in the sizing die is called, that push's down, and keeps the lube from running all over the place)If you hone out the die a .001, wouldn't the lube just squirt out the side's? Just wondering. gypsyman
Logged
We keep trying peace, it usually doesn't work!!Remember(12/7/41)(9/11/01) gypsyman

Offline Drilling Man

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3633
Re: .432 sizer
« Reply #8 on: July 28, 2009, 03:35:31 AM »
Quote from: gypsyman on July 28, 2009, 02:23:35 AM
Never had that done. Just out of couriosity, would you need to have a new ''plug'', made for the sizer?(not sure what that part in the sizing die is called, that push's down, and keeps the lube from running all over the place)If you hone out the die a .001, wouldn't the lube just squirt out the side's? Just wondering. gypsyman

  I've done it, and yes the lube does leak out the sides.

  DM
Logged

Offline matthewquigley

  • Trade Count: (2)
  • Member
  • *
  • Posts: 85
  • Gender: Male
Re: .432 sizer
« Reply #9 on: July 28, 2009, 02:07:35 PM »
well i got a lee push thru die .430    new plan    glue gas checks on with a spot of alox     and dip lube to the fill lube grooves  with homemade lube:   1 pound gulf wax/ 2 tbs stp and 13 oz vaseline with 6 crayons for color
after i hand hone lee sizer to 432  or 433 possibly ;D   take that you over size handi barrel ;D
Logged
M. Quigley
            900 yards
                          O O
                         O     
                           O
H&R 223,25-06,308, 44,357    700VTR 308,  Ruger 77/44, Savage ML10

Offline mdi

  • GBO Supporter
  • Trade Count: (1)
  • Contributor
  • *****
  • Posts: 399
  • Gender: Male
Re: .432 sizer
« Reply #10 on: July 29, 2009, 08:53:41 AM »
I got my .432" Lee sizer from Ranchdog to go along with the mold (265 gr., Gas Check, RNFP, Tumble Lube) I purchased from him. Bullets work well in my Puma .44 Mag. .432" bore.

http://www.ranchdogmolds.com/
Logged

Offline matthewquigley

  • Trade Count: (2)
  • Member
  • *
  • Posts: 85
  • Gender: Male
Re: .432 sizer
« Reply #11 on: July 29, 2009, 02:36:59 PM »
i got it honed  to .433    now to cast and see    how it does
Logged
M. Quigley
            900 yards
                          O O
                         O     
                           O
H&R 223,25-06,308, 44,357    700VTR 308,  Ruger 77/44, Savage ML10

Offline matthewquigley

  • Trade Count: (2)
  • Member
  • *
  • Posts: 85
  • Gender: Male
Re: .432 sizer
« Reply #12 on: July 30, 2009, 09:28:58 PM »
 ;D ;D ;D ;D ;D
yea it works!!!!!!!!!!!!!!!!!!!!!!!   wipes a dip lubed boolit no sizing!!!!!!!!!!  leaves lube grooves full!!!!!!!!!!!     
Logged
M. Quigley
            900 yards
                          O O
                         O     
                           O
H&R 223,25-06,308, 44,357    700VTR 308,  Ruger 77/44, Savage ML10

Offline AtlLaw

  • Moderators
  • Trade Count: (58)
  • Senior Member
  • *****
  • Posts: 6405
  • Gender: Male
  • A good woman, nice bike and fine guns!
Re: .432 sizer
« Reply #13 on: July 31, 2009, 06:26:09 AM »
Quote from: mdi on July 29, 2009, 08:53:41 AM
http://www.ranchdogmolds.com/

Looks like he's going out of business.   :-\  To bad, I maybe coulda used him... maybe....  :-[
Logged
Richard
Former Captain of Horse, keeper of the peace and interpreter of statute.  Currently a Gentleman of leisure.
Nemo me impune lacessit

                      
Support your local US Military Vets Motorcycle Club

Offline matthewquigley

  • Trade Count: (2)
  • Member
  • *
  • Posts: 85
  • Gender: Male
Re: .432 sizer
« Reply #14 on: August 01, 2009, 08:38:58 AM »
well my hand honed die works perfect!!!!!!!  wheelweights cleaned and fluxed    and i added  24 inch piece of 1/8 50/50 solder to my alloy
 cast from a lee 310 gr  gas checked mold and lubed with my "custom"  lube recipe  and wiped thru my sizer @.433   with a hornady gas check       bullets   are as cast    loading with   20.5   21.0  21.5 and 22 grains of H110   also gonna try  10.0 unique   and 18.5 and 19.0 grains of #9     i will crimp into the lower groove for longest OAL  and   we will see how it goes!!!!!!!!!!!   
Logged
M. Quigley
            900 yards
                          O O
                         O     
                           O
H&R 223,25-06,308, 44,357    700VTR 308,  Ruger 77/44, Savage ML10
Pages: [1]   Go Up
« previous next »