Author Topic: Lyman pistol loads  (Read 590 times)

0 Members and 1 Guest are viewing this topic.

Offline Forestclimber

  • Trade Count: (38)
  • A Real Regular
  • ****
  • Posts: 706
Lyman pistol loads
« on: August 05, 2009, 06:26:55 AM »
I recently got a used 54 caliber Lyman Plains Pistol.  What is a good load for this using Goex 2F or 3F?
Is there a load hot enough to kill a deer if it was 15 yards or less away?

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Forestclimber

  • Trade Count: (38)
  • A Real Regular
  • ****
  • Posts: 706
Re: Lyman pistol loads
« Reply #2 on: August 05, 2009, 07:11:45 AM »
Thanks!

Offline Black Jaque Janaviac

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1027
Re: Lyman pistol loads
« Reply #3 on: August 24, 2009, 07:44:41 AM »
I've got a .54 Plains Pistol such as yourself.

I believe I've clocked a 225 grain ball going over 1100 fps using 50 grains of Swiss 3f.  I may have to repeat that again since it was years ago.  I do remember being astonished at the velocity reading on my chronograph.

Sam Fadala's Muzzleloader Loading Manual lists a velocity over 900 fps with 40 grains of Goex 3F.  For whatever reason, Sam did not attempt the 50 grain 3F maximum charge. 

So I would imagine that 50 grains of 3F would put you comfortably in the 1,000 fps mark no matter what powder or conditions.  And considering a 225 grain ball at those velocities - yes I would say that is definitely deer medicine at the distance you mention.
Black Jaque Janaviac - Dat's who!

Hawken - the gun that made the west wild!