Author Topic: Wanted: 1500 fps/200 grain cast load for 35 Rem & 357 Max  (Read 298 times)

0 Members and 1 Guest are viewing this topic.

Offline wreckhog

  • Trade Count: (55)
  • Senior Member
  • *****
  • Posts: 2997
Wanted: 1500 fps/200 grain cast load for 35 Rem & 357 Max
« on: August 09, 2009, 08:04:01 AM »
Have Varget, 4227, 4895, Bue Dot, Trail  Boss, Unique, Bullseye, and H110

Offline BBF

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 10042
  • Gender: Male
  • I feel much better now knowing it will get worse.
Re: Wanted: 1500 fps/200 grain cast load for 35 Rem & 357 Max
« Reply #1 on: August 09, 2009, 08:39:10 AM »
I can only help with two of your powders for the 35 Rem.

Unique       9.5 gr min  1265 fps   12.0 gr max  1465 fps
IMR 4227   19.0 gr min  1375fps    24.2 gr max 1776 fps
What is the point of Life if you can't have fun.

Offline stimpylu32

  • Moderators
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 6062
  • Gender: Male
Re: Wanted: 1500 fps/200 grain cast load for 35 Rem & 357 Max
« Reply #2 on: August 09, 2009, 10:35:14 AM »
wreckhog

Are you planning to use a gas checked cast bullet ?

If so you can use most of the Jacketed bullet data in these rounds without a leading or pressure problem ,

stimpy
Deceased June 17, 2015


:D If i can,t stop it with 6 it can,t be stopped

Offline Badnews Bob

  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 2963
  • Gender: Male
Re: Wanted: 1500 fps/200 grain cast load for 35 Rem & 357 Max
« Reply #3 on: August 09, 2009, 11:28:09 AM »
What are you shooting them out of?   I get 2000fps with a 180gr LFNGC outta my handi rifle .357 max using 21 gr of IMR 4227.
Badnews Bob
AE-2 USN retired

Offline wreckhog

  • Trade Count: (55)
  • Senior Member
  • *****
  • Posts: 2997
Re: Wanted: 1500 fps/200 grain cast load for 35 Rem & 357 Max
« Reply #4 on: August 09, 2009, 12:26:45 PM »
Plain base bullet and I have 4k of them to use up plinking. Thanks.