Author Topic: single action pix (Read 12287 times)

Scibaer · « **on:** August 11, 2009, 02:48:43 PM »

is there a "show off your single action" thread ? i'd like to see some

macbullet · « **Reply #1 on:** August 11, 2009, 03:57:58 PM »

zoner · « **Reply #2 on:** August 12, 2009, 02:12:53 AM »

very niiiiiiice

Buckwheat Jack · « **Reply #3 on:** August 12, 2009, 10:21:29 AM »

I had posted mine when I did a little modifications. I added "medallions" made from cartridge cases to my Charles Daly single actions. They read TEXAS 357 Mag. I use these fine guns for SASS matches with really light loads.

shaner · « **Reply #4 on:** August 12, 2009, 11:06:48 AM »

heres my newest project

BlkHawk73 · « **Reply #5 on:** August 12, 2009, 11:30:27 AM »

Here's a few that've had work:

'Nuff for now.

ctrout · « **Reply #6 on:** August 12, 2009, 05:08:01 PM »

Acusport Bisley in 45 Colt. Had it for 4 years or so. Great gun. Shoots 300gr Beartooth bullets at 1200fps into 1.5 ". Only mods are a Belt Mountain base pin and a poor man's trigger job.

shaner · « **Reply #7 on:** August 13, 2009, 01:08:04 AM »

old pal that made it back

uberti 45colt 3in birdshead gripped 1873

Bigeasy · « **Reply #8 on:** August 13, 2009, 02:43:20 AM »

A good woods gun

44 Man · « **Reply #9 on:** August 13, 2009, 02:30:45 PM »

Greeenriver · « **Reply #10 on:** August 13, 2009, 04:37:56 PM »

Two Colts and a birdshead Uberti. Colts have real Ivory grips, the BH had Trueivory. Just stuck it in 'cause it's a neet little gun.

Greeenriver

shaner · « **Reply #11 on:** August 13, 2009, 04:43:36 PM »

and this one?

uberti 1873 old west finished 45lc

shaner · « **Reply #12 on:** August 13, 2009, 04:44:51 PM »

Quote from: Greeenriver on August 13, 2009, 04:37:56 PM

If someone will explain to me how to get a picture from My documents on my 'puter to here, I'd be happy to post a couple pictures of my babys.

Greeenriver

you will have to download them to a photo site, i use photobucket pretty easy once you get them there , and make a file then copy them here

Greeenriver · « **Reply #13 on:** August 13, 2009, 05:08:05 PM »

Colts

Greeenriver

Greeenriver · « **Reply #14 on:** August 13, 2009, 05:11:48 PM »

Try this again.

These are my Colts. BP frames, all blued, real Ivory grips from the same block of Ivory on both of them, caliber 45 colt.

44 Man · « **Reply #15 on:** August 14, 2009, 09:21:26 AM »

Shaner! I love the 'old' finish on that gun. I hope to do that to one of mine some day, or maybe I'll just carry it until it looks like that!

I wish!
44 Man

zoner · « **Reply #16 on:** August 14, 2009, 11:49:59 AM »

Greenriver...click on reply....when the post reply screen comes up look in the lower left corner and click on additional options...then click browse and a list with your photos in my documents should appear...when you highlight a photo and click open it should attach the photo you opened to the post....good luck

Scibaer · « **Reply #17 on:** August 14, 2009, 01:47:49 PM »

oh man, i just some of those singles ! ..
i guess now i that i asked for it, i should put mine up huh ?
i got a question, how you make that medallion and add it to your grip ? i'd like to do that too.

Buckwheat Jack · « **Reply #18 on:** August 14, 2009, 06:01:28 PM »

My medallions were not much trouble. I cut off the heads of a couple of cartridge cases, a little less than an eighth of an inch past the rim. I drill out the primer sockets so a nail would fit in. I drilled a 3/8 hole in the grip using a forstner bit so it would have a flat bottom, went just deep enough for the case stub to fit up to the rim. Then I cut off some nails that came with curain rods, the round topped nails; made them just long enough to fit in and look like primers. I used expoxy to hold the medallions in place. I only put them on one side of each pistol so I can always put the same gun on the right or the left. THis whole project took less than half an hour.

Greeenriver · « **Reply #19 on:** August 15, 2009, 02:08:30 AM »

Thanks for the help, folks. Think I've got it figgered out now, LOL.

Scibaer · « **Reply #20 on:** August 15, 2009, 03:32:13 AM »

thanks, Buckwheat..
sounds easy enough even i could do that ..

shaner · « **Reply #21 on:** August 15, 2009, 03:07:07 PM »

Quote from: 44 Man on August 14, 2009, 09:21:26 AM

Shaner! I love the 'old' finish on that gun. I hope to do that to one of mine some day, or maybe I'll just carry it until it looks like that! I wish!
44 Man

thats uberti's old west finish, id like to find a 7.5 in like that one ive seen them on GB but never wantto pay a premium they are askin

deerchaser · « **Reply #22 on:** August 16, 2009, 03:25:41 PM »

Here are a few of mine. 41 mag, single six, NAA 22 mag.

Lloyd Smale · « **Reply #23 on:** August 17, 2009, 12:37:29 AM »

bearcat in 41 special
two 4 inch 500 linebaughs
clements lightweight 45 colt
clements 44 special 4 inch round but, bisley accusport 44 with 44man squimshaw, super blackhawk, cimeron thunderer
clements 45 colt bisley, single six 32 birdshead
not shown are my 41 mag 3 screw conversion by clements, My 5.5 inch 475 linebaugh by john, 454 and 475 FA 4 5/8s guns another single six adj. sight 32 mag, a couple single six 22s a couple bearcats my montado my anversary 44 mag that dustin linebaugh cut to 4 5/8s and my 4 5/8s super with grips done by 44man.

Scibaer · « **Reply #24 on:** August 17, 2009, 03:31:07 AM »

those are real nice, Lloyd. the 500's must be a real handful.

oldandslow · « **Reply #25 on:** August 17, 2009, 11:28:12 AM »

Here is my Single Six I've been wagging around since the early sixties. The grips are the rosewood grips off the Blackhawk shown in the thread about making your own pistol grips. They were a pretty crappy fit on either gun so I cleaned up the fit and finished them with clear gloss MinWax. This has been a really sweet little pistol. I have no idea of the number of rounds that have been fired thru it but it has been a LOT. It used to be my prairie dog hunting gun and I didn't even carry a rifle. It has never had a single problem.

I give up. I can't get the picture to link. I'll try something else.

oldandslow · « **Reply #26 on:** August 17, 2009, 11:37:29 AM »

One more try on the Single Six.

Got it this time.

Scibaer · « **Reply #27 on:** August 17, 2009, 12:08:57 PM »

very nice Six, but i really like that holster !
slow, you mentioned a thread about making grips ? where is that thread ?

GRIMJIM · « **Reply #28 on:** August 17, 2009, 01:52:11 PM »

The only single action I have.............. so far.

colt cowboy, in 45 long colt.

Lloyd Smale · « **Reply #29 on:** August 18, 2009, 01:23:13 AM »

the one thats the real handfull is the lightweight 45 colt. I wont tell you the load but it involves pushing a 320 grain bullet to about 1300fps out of that 4 inch barrel. With the standard blackhawk grip frame and the fact its so light it will draw blood on you if your not careful but it makes for a powerful holster gun that is light enough to forget your wearing it.

Quote from: Scibaer on August 17, 2009, 03:31:07 AM

those are real nice, Lloyd. the 500's must be a real handful.