Author Topic: 32 miller short  (Read 1450 times)

0 Members and 1 Guest are viewing this topic.

Offline cfslifer

  • Trade Count: (0)
  • Member
  • *
  • Posts: 5
32 miller short
« on: September 30, 2003, 02:35:42 AM »
would lito get  info on this cart  building win high wall  bbl length twist ect.

Offline zanegrey

  • Trade Count: (0)
  • Member
  • *
  • Posts: 6
Re: 32 miller short
« Reply #1 on: September 30, 2003, 05:00:16 PM »
Hello---The 32 Miller S is a Schuetzen cartridge made for breech seating in rifles. The case is made from 357 mag. brass; sized to a straight taper. The 32 Dell is a simalar case, both can be made from the stronger 357 s.mag cases. Twist depends on your bullet length but can run from 1in12 to 1in16. Barrel length depends on the use you are going to put it to; bench rest or offhand at 200 yards. The 32-40 is the old stand by of this type of shooting and is still a very easy case to work with. Before you start a project of this type try to read up on Schuetzen rifles and the differnt cartridges. "The Modern Schuetzen Rifle" is still available and will answer all the questions you may have. Good luck with the Hi-Wall they make great rifles. Zane

Offline cfslifer

  • Trade Count: (0)
  • Member
  • *
  • Posts: 5
32 miller short
« Reply #2 on: October 01, 2003, 02:27:41 AM »
zane
thanks
the modern schuetzen rifle  book who is the author would like to have a copy  
chuck

Offline zanegrey

  • Trade Count: (0)
  • Member
  • *
  • Posts: 6
Schuetzen book
« Reply #3 on: October 03, 2003, 03:49:41 AM »
Hello Chuck---You can give Charlie Dell a call at 540-382-2245 to order a book. The address is 950 Den Hill Road, Christiansburg, VA --24073-7724. This is a great book covering every aspect of Schuetzen shooting, barrels,molds,loading,actions,casting,scopes,iron sights and dozens of other things including a large chapter on lubes. Charlie is a little hard of hearing so speak up when you call him. What part of the country do you live in; I can probably find a match in your area and you can see some rifles and get some ideas. Good luck--Zane