Author Topic: Ruger Bisley Vaquero Value? (Read 3197 times)

Mxpe78a · « **on:** August 19, 2009, 08:32:31 AM »

I have 2 Bisley Vaqueros I am thinking of selling. They are both 5.5" .357 cal. one blue and one stainless. all boxes and stuff. The blue one never fired. anybody have an idea of the current Value?

BlkHawk73 · « **Reply #1 on:** August 19, 2009, 01:24:06 PM »

Standard, cataloged models?

Mxpe78a · « **Reply #2 on:** August 19, 2009, 02:49:43 PM »

Quote from: BlkHawk73 on August 19, 2009, 01:24:06 PM

Standard, cataloged models?

Yes

rawhidekid · « **Reply #3 on:** September 17, 2009, 07:16:37 AM »

I am out here in Tucson, Az. I just picked up a used Bisley SS .357 w/Fake Ivory Factory grips for $500.00 from a dealer. Hope that helps. Prices may be higher out here because of Cowboy Shooters.

BlkHawk73 · « **Reply #4 on:** September 17, 2009, 12:42:09 PM »

Region has a lot to do with values. Around here, I'd expect to see them tagged around the $425-450 mark.

winman · « **Reply #5 on:** September 18, 2009, 07:15:56 AM »

I saw a stainless .44-40 at a local gun store last week for $425, no box. It looked practically new.

41 magnum · « **Reply #6 on:** September 18, 2009, 06:22:07 PM »

I'd see what they are selling for @ www.gunsamerica.com or www.gunbroker.com

LONGTOM · « **Reply #7 on:** October 03, 2009, 05:23:52 PM »

About $400.00 here in northern VA.

LONGTOM

George63 · « **Reply #8 on:** October 27, 2009, 10:50:01 PM »

sequential pair SS bisley vaquero 357 1050 $ , adding wood grips - another 120 - that white plastic kills me

Bigeasy · « **Reply #9 on:** October 28, 2009, 01:37:50 AM »

Here in PA, they are $510.00 new, at the local gun shop. So about $425.00 or so sounds right.. The Bisley grip frame is somewhat of a hard sell, most folks like the traditional grip style. It's the smart shooter, who has shot both, especially with loads that recoil, the appreciates the Bisley style....

Larry

Hopalong7 · « **Reply #10 on:** October 28, 2009, 06:59:01 AM »

Are y'all talking new model Vaqueros or old? The "old" full size Bisley Vaquero is getting hard to find and bringing a premium around here. I wish I had bought more of them back then.

BlkHawk73 · « **Reply #11 on:** October 28, 2009, 11:05:37 PM »

Quote from: Hopalong7 on October 28, 2009, 06:59:01 AM

Are y'all talking new model Vaqueros or old? The "old" full size Bisley Vaquero is getting hard to find and bringing a premium around here. I wish I had bought more of them back then.

ALL Vaquero models are New Models. New Models started in 1973 and there weren't any Vaqueros until years after that. There's the Vaquero and the New Vaquero.

Old Fart · « **Reply #12 on:** October 29, 2009, 03:42:15 AM »

For whatever it's worth I picked up a nearly new Bisley with the birdshead grip in 357 this summer for $350 here in Oklahoma.
It had the short barrel. I had been looking for one for a couple years. I was surprised to find one this nice, this cheap.

rawhidekid · « **Reply #13 on:** October 29, 2009, 07:59:20 AM »

Old Fart; I believe you have a Blackhawk with a birdshead grip. If it doesn't have the Bisley grip it is just a blackhawk. That is of unless someone changed the grip frame after purchase.

BlkHawk73 · « **Reply #14 on:** October 29, 2009, 02:55:03 PM »

Birdshead gripped Bisley?

Old Fart · « **Reply #15 on:** November 27, 2009, 05:29:55 PM »

Quote from: rawhidekid on October 29, 2009, 07:59:20 AM

Old Fart; I believe you have a Blackhawk with a birdshead grip. If it doesn't have the Bisley grip it is just a blackhawk. That is of unless someone changed the grip frame after purchase.

Probably isn't a Bisley, my bad.
But it's not a blackhawk.

Looks like this one only blue and 357.

BlkHawk73 · « **Reply #16 on:** November 28, 2009, 02:31:13 AM »

That would be a birds head model Vaquero. A BNVBH-33I is what I believe the Cat # would be.

zoner · « **Reply #17 on:** December 24, 2009, 03:39:01 AM »

i had one in 45 LC....a bisley vaquero...but couldn't see the sights well. I bought a 4 5/8" 45LC BH,switched the hammer,trigger and grip frames and then had a 45LC 4 5/8" Bisley(no, its not for sale) and what i had left over was a 45LC Vaquero with a alloy grip frame...sold the vaquero and recovered the money i spent on the BH so my conversion was basically free. If you want to covert a BH to a Bisley it's a good way to go.....

zoner · « **Reply #18 on:** December 24, 2009, 03:42:34 AM »

BTW i am no gunsmith but was able to do this conversion with a Ruger SA owner's manual as my only reference....the parts dropped right in

jlchucker · « **Reply #19 on:** December 24, 2009, 06:14:49 AM »

Quote from: 41 magnum on September 18, 2009, 06:22:07 PM

I'd see what they are selling for @ www.gunsamerica.com or www.gunbroker.com

Will these sites tell you what they are selling for, or what the targeted prices are? I was in a gun shop the other day, and the subject of gunbroker prices came up, with reference to a particular model. This particular dealer moves guns through gunbroker as a part of his business, and he was saying that much of the time the actual sell price is a lot less than what one would think. I suspect that Blackhawk73 may be right in his assessment that values may be pretty much regional.

BlkHawk73 · « **Reply #20 on:** December 24, 2009, 09:48:49 AM »

With GunBroker, look and see what completed auctions results were. You can see what people are bidding up to even if the item didn't meet a reserve.