Author Topic: By way of introduction...  (Read 465 times)

0 Members and 1 Guest are viewing this topic.

Offline J. J. Magnum

  • Trade Count: (2)
  • Member
  • *
  • Posts: 52
By way of introduction...
« on: August 21, 2009, 09:05:14 AM »
Good Afternoon, J. J. Magnum here.

I thought I would drop by and post a couple of pics of my two "Survivors".  I thought you might like to see the completion of my "sighting" project for the NEF's.  I bought the original 308 model when I still lived in South Carolina as a back-up to my Ruger bolt-action deer rifle.  It of course came with just the scope rail and no other sights.  This was fine with me at the time but I wanted something more in keeping with the "survivor" idea; what would happen if the scope failed?  So I cast around and found the XS (Ashley) ghost ring sight.  That left putting a front sight on the 308.  A couple of years went by and I relegated the project to the back burner so to speak.

Then last January I found a great buy on the 45/410 at my local Gander Mtn.  It came with NO sights (just a bead).  I knew that wouldn't do, especially since I didn't get as much accuracy from the 45 LC at 50 yds. as I had hoped (my S&W 25 was better). 

About this time I met a new friend who was a retired gunsmith looking for some small projects, so I dropped the whole kit and caboodle in his lap.  This was the result:


(the blued one is in 308 and the nickle one in 45). 

Here is a close up of the Ashley Ghost Ring sight on the 45. 



This is a view through the ghost ring to the front sight.  A very quick acquisition indeed.



Both weapons will now take either scopes or irons.  The next two projects with these rifles is to acquire a second Ashley Ghost Ring (for the 308) and a Red Dot for the 45...  ;)

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: By way of introduction...
« Reply #1 on: August 21, 2009, 09:37:26 AM »
Welcome aboard JJ! Nice work on the sights, I've been thinking about altering one of the Eabco peep rails to work on H&Rs, but after seeing yours, I think the flat spot on a Weaver #82 would work fine too with the right sight, I just happen to have a WGRS with a milled base that may fit fine, the Marbles might work on it too.

Thanks for sharing, be sure to spend some time in the FAQs and Help sticky, lots of good info there for Handholics.  ;)

Tim

http://www.eabco.com/Muzzleloader03.htm

"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: By way of introduction...
« Reply #2 on: August 21, 2009, 09:44:23 AM »
Nice job with those babies ;)  They both look good.  I wish I could use iron sights again.  Welcome, and good luck with both.

Pete
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline bljc27

  • Trade Count: (0)
  • Member
  • *
  • Posts: 68
  • Gender: Male
Re: By way of introduction...
« Reply #3 on: August 21, 2009, 10:34:42 AM »
Looks good... Welcome!

Offline mitch132

  • Trade Count: (35)
  • Avid Poster
  • **
  • Posts: 246
  • Gender: Male
Re: By way of introduction...
« Reply #4 on: August 21, 2009, 03:57:51 PM »
Welcome! You'll fit in just fine around here. Only 4 posts and already giving us some new handi porn to look at!  ;D  Thanks for sharing, they look like some fine shooters.

Offline mechanic

  • GBO Supporter
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 5112
  • Gender: Male
Re: By way of introduction...
« Reply #5 on: August 21, 2009, 04:47:19 PM »
Welcome aboard Mr. Magnum, and thanks for the idea.  Gives me a new project for one of my guns.....
Molon Labe, (King Leonidas of the Spartan Army)

Offline Oldshooter

  • GBO subscriber and supporter
  • Moderators
  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 6426
Re: By way of introduction...
« Reply #6 on: August 21, 2009, 04:58:35 PM »
Nice job with those babies ;)  They both look good.  I wish I could use iron sights again.  Welcome, and good luck with both.

Pete

Pete have you tried the ghost rings or peeps, they have renewed my love of iron sights!
“Owning a handgun doesn’t make you armed any more than owning a guitar makes you a musician.”

"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."

Offline Datil

  • GBO Supporter
  • Trade Count: (17)
  • Senior Member
  • *****
  • Posts: 1822
  • Gender: Male
Re: By way of introduction...
« Reply #7 on: August 21, 2009, 04:58:57 PM »
 Welcome JJ, good Pics. I can not those sights, Have to have scopes.
 Marv.

Offline Badnews Bob

  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 2963
  • Gender: Male
Re: By way of introduction...
« Reply #8 on: August 22, 2009, 01:47:59 AM »
Howdy JJ welcome.  I have peeps on several of my rifles I love'em. ;D
Badnews Bob
AE-2 USN retired

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: By way of introduction...
« Reply #9 on: August 22, 2009, 03:37:25 AM »
Nice job with those babies ;)  They both look good.  I wish I could use iron sights again.  Welcome, and good luck with both.

Pete

Pete have you tried the ghost rings or peeps, they have renewed my love of iron sights!

I have a T/C .32 Cherokee with their Hunter Peep sight.  I removed the aperature and use it as a ghost ring.  It works fairly well for me, but not as well as a red dot.  I just refuse to put a new fangled contraption on a traditional side hammer.  That little rifle has been a tack driver for many years now.

Pete
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491