« previous next »
Pages: [1]   Go Down

Author Topic: CRKT M16  (Read 1631 times)

0 Members and 2 Guests are viewing this topic.

Offline jamaldog87

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1465
  • Gender: Male
CRKT M16
« on: September 03, 2009, 07:53:56 AM »
i have a  CRKT M16 -02Z with the Zytel handles and the Tanto-style blade. Is this a very good kinfe and how strong is it? I have mostly all steel knifes but this one was only 5$ at a yard sale so i got it.
Logged
Most Interesting Man in the World: I Don’t Always Watch Shows for Little Girls, but when I Do, I prefer My Little pony . stay magic my friends

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: CRKT M16
« Reply #1 on: September 03, 2009, 08:08:12 AM »
you get what you pay for , i had one and also a Benchmade of similar construction . if crkt broke/got weak and the lock would not keep it from closing lots of play in blade to frame pin. The Benchmade is still going strong , good lock and no play .
Logged
If ya can see it ya can hit it !

Offline rio grande

  • Trade Count: (39)
  • Senior Member
  • *****
  • Posts: 1205
Re: CRKT M16
« Reply #2 on: September 03, 2009, 01:08:14 PM »
You got a fantastic deal.
CRKT is very good.
I prefer some Cold Steel offerings, but I think most folks would say anything from CRKT is first-class in material and construction.
$5.00 ????
If shootall has got you worried about, I'll give $10 :)
Logged

Offline mcwoodduck

  • Trade Count: (11)
  • Senior Member
  • *****
  • Posts: 7983
  • Gender: Male
Re: CRKT M16
« Reply #3 on: September 03, 2009, 01:26:03 PM »
You got a good deal. 
Heck I'll give ya $11 for it.
As long as you use it as a knife it will work for you.
I have a few I did bad things using the blade to pry with and bent the liner or loosened the liner.
I have also used a smaller version of that knife to cut 1/4" sheet plastic from the wheel well of my Ford after I blew a tire and that knife still is sharp and works well.  CRKT makes good stuff.  My office knife is a CRKT Convergence.  It has opened punches of boxes and blister packs and has yet to be sharpened.  I bought three as they were only 18 each and figured I would kill this one quick and use the other two.  Ended up giving them away to friends.  I may have cheap crap for my use but will not give away anthing that is crap.
Logged

Offline rio grande

  • Trade Count: (39)
  • Senior Member
  • *****
  • Posts: 1205
Re: CRKT M16
« Reply #4 on: September 03, 2009, 01:32:56 PM »
Back off mcwoodduck! I got here first!    $11.50!
Looks like that model discontinued, but is it like this one?  MSRP $59.99   
 http://www.crkt.com/M1603Z 
Logged

Offline mcwoodduck

  • Trade Count: (11)
  • Senior Member
  • *****
  • Posts: 7983
  • Gender: Male
Re: CRKT M16
« Reply #5 on: September 03, 2009, 01:52:54 PM »
LOL
I will not raise the bid.  No matter how much I want to say $11.51. :D
I think even if we hit $25 jamal will say no thank you.
Logged

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: CRKT M16
« Reply #6 on: September 03, 2009, 02:59:43 PM »
Quote from: SHOOTALL link=topic=181929.msg 1098884930#msg 1098884930 date=1252001292
you get what you pay for , i had one and also a Bench Made of similar construction . if crkt broke/got weak and the lock would not keep it from closing lots of play in blade to frame pin. The Benchmade is still going strong , good lock and no play .

Sorry to hear of your bad experience with the CRKT. Generally they are a good knife. The M16 or one version of it is made to US Mil spec. I have three different variants and like them all. M13z?? is my favorite, just a shade larger then my others with a partial serrated blade. The steel is VERY hard and isnt easy to sharpen, but holds it edge well. I don't really care for the one side sharpened crap, but overall its a good knife.

Rio,
 I agree, I also prefer the Cold Steel offerings too.

CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline rio grande

  • Trade Count: (39)
  • Senior Member
  • *****
  • Posts: 1205
Re: CRKT M16
« Reply #7 on: September 03, 2009, 03:09:10 PM »
Quote from: cwlongshot on September 03, 2009, 02:59:43 PM
Quote from: SHOOTALL link=topic=181929.msg 1098884930#msg 1098884930 date=1252001292
you get what you pay for , i had one and also a Bench Made of similar construction . if crkt broke/got weak and the lock would not keep it from closing lots of play in blade to frame pin. The Benchmade is still going strong , good lock and no play .

Sorry to hear of your bad experience with the CRKT. Generally they are a good knife. The M16 or one version of it is made to US Mil spec. I have three different variants and like them all. M13z?? is my favorite, just a shade larger then my others with a partial serrated blade. The steel is VERY hard and isnt easy to sharpen, but holds it edge well. I don't really care for the one side sharpened crap, but overall its a good knife.

Rio,
 I agree, I also prefer the Cold Steel offerings too.


CW




cwlongshot,
I carry the CS medium Voyager, tanto point.  It's a bit small but would maybe keep me out of trouble w/ the LAW.
I've carried it for years, no issues w/ the knife or the LAW :)
It's strong, but light w/synthetic grip.
Carried it hiking up Santa Fe Baldy, Pikes Peak, and lots of places camping and hiking. It's a good friend.

Logged

Offline jamaldog87

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1465
  • Gender: Male
Re: CRKT M16
« Reply #8 on: September 04, 2009, 05:23:31 AM »
Quote from: rio grande on September 03, 2009, 01:32:56 PM
Back off mcwoodduck! I got here first!    $11.50!
Looks like that model discontinued, but is it like this one?  MSRP $59.99   
 http://www.crkt.com/M1603Z 

yes, the one and the same. I guess it's a good knife. Also if your looking for good deal just look around town. I have seen Cold Steel and Benchmade knifes sometimes for 20-30$ at Wain Robert's Firearms‎ (5400 Park Blvd, Pinellas Park, FL‎ - (727) 544-7935‎) or the Wagon Wheel Flea Market‎.  At the Wagon Wheel Flea Market‎ i got my big john copy and some good swords.
 
Logged
Most Interesting Man in the World: I Don’t Always Watch Shows for Little Girls, but when I Do, I prefer My Little pony . stay magic my friends

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: CRKT M16
« Reply #9 on: September 04, 2009, 05:50:56 AM »
where are benchmade for 20-30 bucks ? crkt aren't half the knife of a benchmade on their best day !
Logged
If ya can see it ya can hit it !

Offline jamaldog87

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1465
  • Gender: Male
Re: CRKT M16
« Reply #10 on: September 04, 2009, 07:52:11 AM »
At Wain Robert's Firearms‎ i saw 3, one was a used  Bali-Song, one was a  Model 100SH2O - River/Dive , the last was a  Pink Mini-Griptilian Knife but this was back in july. From time to time benchmade turn up at the Wagon Wheel Flea Market‎. For about 3 weeks one man was sell a lot of cold steel knifes for 30$ or less. i almost got a Recon Tanto(15$) and a Trail Master (27$) but at the time i could not see a need for a big knife.

 
 
 
Logged
Most Interesting Man in the World: I Don’t Always Watch Shows for Little Girls, but when I Do, I prefer My Little pony . stay magic my friends

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: CRKT M16
« Reply #11 on: September 04, 2009, 10:20:46 AM »
were they smoking ?
Logged
If ya can see it ya can hit it !

Offline mcwoodduck

  • Trade Count: (11)
  • Senior Member
  • *****
  • Posts: 7983
  • Gender: Male
Re: CRKT M16
« Reply #12 on: September 08, 2009, 09:00:38 AM »
Wow.
Can I send you some $ and have you as my shopper?
Give you a list of Knives I want and see what you can come up with as a price.
I am looking for a Kershaw Rip cord.  They sell from $75 to 100 bucks depending.
See what you can find.
Logged

Offline rio grande

  • Trade Count: (39)
  • Senior Member
  • *****
  • Posts: 1205
Re: CRKT M16
« Reply #13 on: September 11, 2009, 02:11:49 PM »
Quote from: jamaldog87 on September 04, 2009, 07:52:11 AM
At Wain Robert's Firearms‎ i saw 3, one was a used  Bali-Song, one was a  Model 100SH2O - River/Dive , the last was a  Pink Mini-Griptilian Knife but this was back in july. From time to time benchmade turn up at the Wagon Wheel Flea Market‎. For about 3 weeks one man was sell a lot of cold steel knifes for 30$ or less. i almost got a Recon Tanto(15$) and a Trail Master (27$) but at the time i could not see a need for a big knife.

 
 
 

Oh mercy, you're killing me!  Recon Tanto $15???  Trail Master $27????
You could have tripled your money on those.
I remember the flea markets in Colorado - they were kinda like that - I sure miss 'em!
Here in Houston the flea markets are just chinese new-made junk and Mexican folks selling clothes and broken kid's toys they bought at garage sales! Sad, sad affairs.
Can I send you some investment money too?
Or you should buy that stuff and sell here on Graybeards - you'd be doing us a favor!

"Give you a list of Knives I want and see what you can come up with as a price."
You gotta hand it to mcwoodduck - quick on the uptake - smart man there!
Logged

Offline mcwoodduck

  • Trade Count: (11)
  • Senior Member
  • *****
  • Posts: 7983
  • Gender: Male
Re: CRKT M16
« Reply #14 on: September 14, 2009, 12:20:16 PM »
Wow.
No one ever said that about me before.
thanks.   ;D
Logged

Offline jamaldog87

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1465
  • Gender: Male
Re: CRKT M16
« Reply #15 on: September 15, 2009, 11:07:48 AM »
anyways that was back in july 08, they still had the  Pink Mini-Griptilian Knife last time a was down there and i have not been back down there in sometime. But if you look around good things turn up sometimes. Last time i was down there (it's 30 miles from tarpon springs) He let me have all the gun and ammo, guns, and outdoor life magazine for a .25cent a stack(50-75 or more in a stack). So now i have about 200 of those now :o I also pick up a used Bushnell shotgun scope for 5$ but i sold it the next day becuase i wanted more power.
Logged
Most Interesting Man in the World: I Don’t Always Watch Shows for Little Girls, but when I Do, I prefer My Little pony . stay magic my friends
Pages: [1]   Go Up
« previous next »