« previous next »
Pages: [1]   Go Down

Author Topic: Gunstock Inc.  (Read 983 times)

0 Members and 1 Guest are viewing this topic.

Offline pozoutdoors

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 225
  • Gender: Male
Gunstock Inc.
« on: September 09, 2009, 05:51:51 PM »
I was just at Gunstock Inc. I took a stock from my old knight rifle over to see if he could make a new one to fit my 9 year old boy. He said it would be a while, maybe a month or two!! But we talked for a while and I mentioned I shot an encore. He said, well he would give me a throw away shock for my boy to fit my encore. The only thing that was wrong with it, is that it had a chip at the end of the grip!!! He even cut it down to fit him!!! Did I say it was a FREE thumb-hole stock!!! I just wanted to say he is top notch!!! I will be buying a knew encore stock set from him. I had a good time talking to him for several hours!!!! If anybody wants to buy an encore stock or any other stock, this is the guy!!! Hell, my boys were having fun with his wife and she took them to the garden and gave them 4 huge cucumbers to take home!!! I don't know why we don't know each other. He went to school with my dad and he only lives about 10 miles from me!!! But I do have a new friend!!!!
Logged

Offline MWells

  • Trade Count: (3)
  • Member
  • *
  • Posts: 67
Re: Gunstock Inc.
« Reply #1 on: September 10, 2009, 07:00:45 AM »
I got a thumbhole for my Contender from them. Absolutely beautiful. They do great work.

Logged

Offline lostintexas

  • Trade Count: (0)
  • Member
  • *
  • Posts: 57
Re: Gunstock Inc.
« Reply #2 on: September 10, 2009, 08:29:37 AM »
Do you have a link for them?

Thanks,
LIT
Logged

Offline skb2706

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 1428
Re: Gunstock Inc.
« Reply #3 on: September 10, 2009, 09:35:56 AM »
I bought this one roughcut from him. It finished out nicely.

Logged

Offline pozoutdoors

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 225
  • Gender: Male
Re: Gunstock Inc.
« Reply #4 on: September 10, 2009, 11:23:02 AM »
Logged

Offline David D.

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 680
  • Gender: Male
Re: Gunstock Inc.
« Reply #5 on: September 10, 2009, 11:46:27 AM »
Yes Ed and Ronda are good people. I have been dealing with them for years. Always ready to help. Never met them in person but have talked several times on the phone with both. Feels like they are good neighbors.  ;D
Logged
Dave D.

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26939
  • Gender: Male
Re: Gunstock Inc.
« Reply #6 on: September 10, 2009, 11:48:52 AM »
And they are GBO Sponsors, have been for several years now. It's always good to hear positive experiences with our sponsors.
Logged


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline MWells

  • Trade Count: (3)
  • Member
  • *
  • Posts: 67
Re: Gunstock Inc.
« Reply #7 on: September 10, 2009, 12:06:29 PM »
Quote from: Graybeard on September 10, 2009, 11:48:52 AM
And they are GBO Sponsors, have been for several years now. It's always good to hear positive experiences with our sponsors.

GB - If it helps, that exactly how I found them. Clicked on the banner at the top of the page. A few clicks later and my stocks were ordered.
Logged

Offline lostintexas

  • Trade Count: (0)
  • Member
  • *
  • Posts: 57
Re: Gunstock Inc.
« Reply #8 on: September 10, 2009, 05:42:14 PM »
Thanks, heading over to check them out now!

BTW - those are nice stocks you guys are showing.
Logged

Offline Alaska Dave

  • GBO Supporter
  • Trade Count: (47)
  • Contributor
  • *****
  • Posts: 446
  • Gender: Male
Re: Gunstock Inc.
« Reply #9 on: September 11, 2009, 03:14:26 AM »
I've picked up several of their unfinished stocks and have been very pleased both with the stocks and their prices.
Logged
Do you speak German? Well I don't speak Spanish so maybe you'd better learn English.

Offline Possumcop

  • GBO Supporter
  • Trade Count: (14)
  • Member
  • *****
  • Posts: 81
  • Gender: Male
Re: Gunstock Inc.
« Reply #10 on: September 11, 2009, 11:18:15 AM »
GSI is great to do business with.
I just finished this Ruger 204 with GSI wood and MGM barrel.

Logged
"Be who you are, say what you think, people that matter don't care, and
people that care don't matter." -- Dr. Seuss

Offline JON8777

  • Trade Count: (3)
  • Avid Poster
  • **
  • Posts: 168
Re: Gunstock Inc.
« Reply #11 on: September 11, 2009, 05:15:39 PM »
I orderd a 209x50 laminate forend from them, nice people to deal with.

Origional I was going to order the stock set from them, but at 80$ for a NIB/"used" Laminate stock set I couldnt pass up the deal.
Logged

Offline Gabby

  • Trade Count: (0)
  • Member
  • *
  • Posts: 18
Re: Gunstock Inc.
« Reply #12 on: September 12, 2009, 02:40:01 AM »
Do these stocks need fitting to the frame.  I can handle the sanding and finishing but other than that I have no stock making skills.
Logged

Offline Bullseye

  • Trade Count: (9)
  • Senior Member
  • *****
  • Posts: 1879
Re: Gunstock Inc.
« Reply #13 on: September 12, 2009, 03:13:35 AM »
I have two of them and both were un-finished and fit the frame without any fitting.  I think I might of had to open the barrel channel up a bit with sandpaperand and a dowel rod.  Both of mine were inletted for Contenders but were made to the bigger overall size of the Encore.  The Contender factory stocks are a little to small for my tastes.
Logged

Offline skb2706

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 1428
Re: Gunstock Inc.
« Reply #14 on: September 12, 2009, 05:31:37 AM »
Quote from: Gabby on September 12, 2009, 02:40:01 AM
Do these stocks need fitting to the frame.  I can handle the sanding and finishing but other than that I have no stock making skills.

I have worked with two complete sets. Both purchased unfinished. The buttstock is inletted to fit the frame and a basic buttstock shape. They leave a lot of wood for you to work with for shaping. The foreends are drilled and counter bored for screws, barrel channel cut but only minimum size. I took my foreends and set them up in my Bridgeport mill and used a ball end mill to cut the barrel channel exactly how I wanted it.
Logged
Pages: [1]   Go Up
« previous next »