Author Topic: Camo thumbhole stocks (Read 2701 times)

Ten Ring · « **on:** September 15, 2009, 02:12:22 PM »

If your looking for a blem stock Boyd's E-Bay store is listing them today.
Jim

Jimbo47 · « **Reply #1 on:** September 15, 2009, 02:28:31 PM »

Link?

wreckhog · « **Reply #2 on:** September 15, 2009, 02:47:02 PM »

I looked very hard and saw nothing

Ten Ring · « **Reply #3 on:** September 15, 2009, 03:05:20 PM »

Go to Boyd's site, click on factory seconds, click on goto e-bay store.
They had about 15 left earlier.
Jim

ruppster · « **Reply #4 on:** September 15, 2009, 03:08:34 PM »

You didn't look too awful hard...

http://stores.shop.ebay.com/Boyds-Gunstock-Store Here you go. I guess you would need to buy the forends separately?
I am looking at one of these for my Marlin 17HMR, it looks like they just need some finish work with a piece of sandpaper & a couple of layers of finish. Is that about right?

Slackdaddy · « **Reply #5 on:** September 15, 2009, 03:32:26 PM »

What am I missing ??
they have the same one that has been listed since Sept 6th ??

watsisname · « **Reply #6 on:** September 16, 2009, 01:31:23 AM »

Seems to me the prices on their "factory seconds" stocks have more than doubled from last year's price.

quickdtoo · « **Reply #7 on:** September 16, 2009, 05:46:41 AM »

I've bought 5 Boyd's t-hole second stocks in the last 3yrs, I've paid anywhere from $22 to over $80, so I don't consider the $44 to be double what they've sold for in the past, only one was $22, the rest were ~$40 or more. When you consider H&R sells them for $90 plus shipping, and all the seconds that I've received had very minor imperfections and all had Pachmyr pads, $44 is still a bargain unless they're charging way too much for shipping.

Tim

watsisname · « **Reply #8 on:** September 16, 2009, 06:09:34 AM »

Last year they were selling them for $22.00. Now they are selling for $44.00. I was just stating "facts". I don't know why the price has doubled since last year, maybe it's inflation?

quickdtoo · « **Reply #9 on:** September 16, 2009, 06:49:03 AM »

Only one of mine came off ebay about 3yrs ago, there were some horror stories on those sold by Boyd's dealer, BV Pawn, all the rest of mine came direct from Boyd's, I even got a pepper laminate last year that was unfinished, it was $75 shipped, so just be glad you can get them for $44.

Tim

wayne24 · « **Reply #10 on:** September 16, 2009, 09:47:41 AM »

I bought 3 of the stocks last week.All 3 were double laminate blems.One of the stocks has finish and the other 2 do not, all have the Pachmyr pad and came with the stock bolt.To me I don't think the blemish is bad.Boyds must have a very high quality standards.Just ordered a camo laminate forend from H&R to go with the one finished stock(part number fs02588 $41.30 if anyone else wants one)I think I will paint the other ones to match the composite for ends on my other guns.
Wayne

quickdtoo · « **Reply #11 on:** September 16, 2009, 10:25:34 AM »

Uh oh, S02588 is the 12ga USHD forend, it's longer than a rifle forend and has a bigger channel for the 12ga USH barrel.

Tim

wreckhog · « **Reply #12 on:** September 16, 2009, 05:08:05 PM »

Got 5 which reduces shipping a lot. So how often do factory 2nd forends go on sale?

quickdtoo · « **Reply #13 on:** September 16, 2009, 07:23:59 PM »

The only source is H&R's 20ga USHD forend and it's checkered........ when they have them in stock. GSI offers unfinished laminated forends.

Tim

wayne24 · « **Reply #14 on:** September 16, 2009, 07:44:49 PM »

Looks like I got some wrong info.I will have to check into that.
Thanks Quickdtoo,
Wayne

wayne24 · « **Reply #15 on:** September 17, 2009, 09:14:41 AM »

Just got off the phone with H&R .I canceled the order for the forend .Quick you were right again.They gave me the wrong info.Will have to check into gunstocks inc.
Wayne

quickdtoo · « **Reply #16 on:** September 17, 2009, 09:25:00 AM »

Glad ya got that straightened out, someone else got one of those forends from them too. $:-\$

The other forend that might be the one you want is S02587 which is listed on the parts price list as 20ga leafy camo waterfowl for the 20ga USHD, dunno if the description is in error because they do offer the 20ga USHD which has a camo lam stock and the forend is the same as the rifle forend, both the t-hole model SB1-T92 and the SB1-928 have camo lam stocks, the SB1-T92 forend should be smooth.

Tim

http://www.hr1871.com/Firearms/Shotguns/ultraSlug.asp

Mitch in MI · « **Reply #17 on:** September 18, 2009, 05:40:02 AM »

I think I've got 1/2 dozen of these, finished. Picked one at random and put it on a Handi, couldn't figure out what they meant by "proud metal", it just didn't have as much proud wood as a factory stock.

thomasblack · « **Reply #18 on:** September 18, 2009, 05:46:06 AM »

Where is a good place to get a forend for these things? Could I get it from H&R?

Mitch in MI · « **Reply #19 on:** September 19, 2009, 09:04:36 AM »

Thomas, look up a few posts in this thread. Tim/Quickdtoo gave the details on factory (H&R) green laminate forends.

thomasblack · « **Reply #20 on:** September 19, 2009, 12:32:03 PM »

I saw that. But to be honest ,it was a little confusing. No fault of Tim's, I'm just not too bright sometime. I guess what I'm asking, is can I call H&r and ask for a fore end from a particular rifle?

quickdtoo · « **Reply #21 on:** September 19, 2009, 02:29:49 PM »

If I was gonna order one from H&R, I'd just play dumb and ask for a forend for the SB1-T92 if you want a smooth forend, or one for an SB1-928 if you want a checkered forend, those two shotguns take the same forend as a rifle.

Tim

tonyd2 · « **Reply #22 on:** September 19, 2009, 04:47:19 PM »

just orderd one only two left

Tony

thomasblack · « **Reply #23 on:** September 19, 2009, 06:13:13 PM »

Quote from: quickdtoo on September 19, 2009, 02:29:49 PM

If I was gonna order one from H&R, I'd just play dumb and ask for a forend for the SB1-T92 if you want a smooth forend, or one for an SB1-928 if you want a checkered forend, those two shotguns take the same forend as a rifle.

Tim

Thanks a bunch! That is what I figured, but didn't know if they would need an actual part number. I will give that a shot. Again thanks.

wayne24 · « **Reply #24 on:** September 28, 2009, 05:20:10 AM »

I called H&R and ordered the SB1-928 checkered forend.I will have to wait until they get my 500 s&w repaired and a new 357 mag barrel fitted to see if they send me the right one.My 500 was popping open at every shot so I called customer service and they sent me a label.I decided to have them fit a new barrel and ship it back to me on their dollar.It was logged in on the 17th and then on the 24th that a repair man is working on it.I will let everyone know when I get some updates.
Wayne

wreckhog · « **Reply #25 on:** September 28, 2009, 08:50:23 AM »

Ordered 5. All unfinished. Have the Pac recoil pad. No swivel or stock bolt. Nice pieces though.

thomasblack · « **Reply #26 on:** September 28, 2009, 10:30:57 AM »

Quote from: wayne24 on September 28, 2009, 05:20:10 AM

I called H&R and ordered the SB1-928 checkered forend.I will have to wait until they get my 500 s&w repaired and a new 357 mag barrel fitted to see if they send me the right one.My 500 was popping open at every shot so I called customer service and they sent me a label.I decided to have them fit a new barrel and ship it back to me on their dollar.It was logged in on the 17th and then on the 24th that a repair man is working on it.I will let everyone know when I get some updates.
Wayne

I ordered the same. just opened it. It's about six inches longer than the other fore ends I have. And the barrel channel is WAY to big. Part number fs02588. Wich now I see is what they told Wayne 24 he needed...........AUGH!

bigvarmnt · « **Reply #27 on:** September 28, 2009, 10:39:17 AM »

This forum is a great commercial for the folks at Remington.

thomasblack · « **Reply #28 on:** September 28, 2009, 10:43:34 AM »

Well, I talked to someone that appears to have his head on straight. He's sending the correct one out this afternoon. Time will tell. I love my handis, but good grief.

quickdtoo · « **Reply #29 on:** September 28, 2009, 12:01:34 PM »

Looking at the old retail parts price list in the FAQs, looks like the correct smooth camo lam forend is R01182, dunno if it's still available, but if I was gonna order by part number, that would be it.

Tim